Cabinet Coolers Dealers

• Brand Name: Elanpro
• Refrigerant: 134a
• Temperature: 2-8 DegC
• Place of Origin: India

Flat glass cake and pastry display is available in 2 sizes. 3 ft width and 4.5 ft width. It is also available in 3 variables refrigerated, ambient and heated. It is also available in refrigerated front open type.

• Country of Origin: India
• Material: Metal
• Feature: Complete Finishing, Corrosion Resistance, Durable, Easy To Fit
• Condition: New
• Finishing: Polished
• Power Source: Electric

EXAIRs cabinet coolers for control panels are UL Component Recognized and provide a low cost method of both purging and cooling electrical and electronic control panels. There are virtually no moving parts. These units are compact and can be installed in minutes through a standard electrical knockout. These units are available for NEMA Type 12, NEMA Type 4-4X rated panels. These user friendly air conditioning systems provide maintenance free cooling for a lifetime of protection without wearing out.

General Imsubs, Vortex based cabinet coolers are compact, quick install and maintenance free solution to heating problem often faced in control panels. General Imsubs cabinet coolers are made from Stainless steel and they do not affect safety of panel cabinets. General Imsubs cabinet coolers are available with thermostat control or continuous operation type. General Imsubs Cabinet coolers are provided with pressure relief valves so that safety of panel cabinet is not affected. Cabinet coolers are available in various cooling capacity from 55 to 700 Kcal/Hr (215 to 2800 Btu/H). Multiple cabinet coolers can be coupled to achieve higher cooling capacities. PERFORMANCE : Performance mentioned here is at tube being set to maximum refrigeration. Air flow is at 7 bar (100 PSI) pressure. Cabinet coolers are advised to be used with appropriate drier, where compressed air due point temperature is lower than -25 ° C to ensure safety of control panel. Cabinet coolers are supplied with air distribution kit and customer can optionally order suitable air filters. Available options: Air filter Side mounting kits. Temperature control kit with solenoid valve (Requires AC power supply)

THERMOSYS is years old brand name engaged in manufacturing of Heat Transferring Systems incorporating Heat Pipe as a main device. Our Heat Transferring Systems include Heat Pipe Cabinet Cooler, Electric Panel Cooler, heat recovery heat exchangers for flue gas heat recovery, furnace heat recovery, Recovery from chemical driers and oil coolers. We started making Heat Pipe Cabinet Cooler in 1986, after that we extended our scope of services towards Military as well as Space applications helping them to solve thermal problems with the help of Heat Pipe Cabinet Cooler. WHAT IS A HEAT PIPE? Heat pipe is a close loop evacuated tube having a capillary wick structure along its inside periphery, Inside the tube there is liquid (usually water or alcohol), which works as a heat transfer agent. As soon as the heat is applied at either end of heat pipe liquid inside enters the vapor state, in return it picks up latent heat of vaporization. Due to pressure difference inside the tube, Vapors travel at sonic speed towards the other end of the tube where it gives up the latent heat of condensation. Condensate returns back to the heat in section of the heat pipe through capillary structure. This process of evaporation and condensation makes the heat pipe capable of transferring large quantity of heat with a small temperature gradient along the heat pipe length. Unparallel to its heat transfer capacity heat pipes are thousand times faster than any known metal in the world, (even copper or silver), That’s why heat pipes are called hyper heat conductors. As there are no moving parts inside the heat pipe, they can last very long period of time giving uninterrupted services. Modern day electronics continue to be placed in denser packaging and smaller enclosures. Consequently, electronics are being designed to handle higher temperatures. So they require high degree of cooling methods, e.g. air conditioners, fan cooling, water circulation, and oil circulation. Where air conditioners have disadvantage in coastal areas or in rainy seasons when humidity level is too high, Condensation of moisture can damage sensitive electronic equipments. Sealed cabinets can protect the electronics, but it can lead to overheating of components, which may cause instability and unnecessary breakdowns in operations. Fan cooling can invite moisture and dust inside the cabinet which may be fatal for electronic systems. The effective alternative to above problems are Heat Pipe Cabinet Cooling Systems. Our Heat pipe cabinet cooler is a compact small-sized and light-weight, air to air heat exchanger that solves these problems by cooling and re circulating clean air inside the cabinet and maintains the enclosure’s protective seal against contaminants. It is partitioned at the center having two small fans at both the ends, Partition plate is sealed with a gasket. Half the portion of the heat exchanger is placed inside the cabinet and other half remains out side the cabinet. Hot air inside the cabinet is delivered on to the heat pipe surface with the help of a small fan, here heat pipes absorbs the heat and transfers it to the other end of the system which is placed outside the electronic cabinet. It is cooled by another small fan located at this end. Temperature inside the cabinet remains few degrees centigrade above ambient. Power drawn by the Heat Pipe Cabinet Cooler is very small. It is one-tenth compared to the conventional methods of cooling. It requires just one hour for installation, is hassle-free and easy to maintain. Our Heat Pipe Cabinet Cooler just requires changing of fans after every five years. We offer Heat Pipe Cabinet Coolers in different sizes. Water cooled models are available in case temperature required is below ambient level. Corrosion proof models also available as per request. Standard heat pipe cabinet coolers are MS power coated, but they are also available in corrosion proof anodized aluminum housing if required. Different models are available as per the heat transfer capacity requirements. Information required is as mentioned below. Area of cabinet in ft 2Max. Temperature in oC of inside the cabinet areaÃŽ” T Required (ÃŽ” T is permissible temperature rise above ambient after panel cooler is installed)ÃŽ” T required below ambient ( In case water cooled heat exchanger required)Power to be dissipated in watts/hr.Information about the cooling medium, (Whether any corrosive contaminants in the medium).Ambient temperature in oC around the cabinet area Owing to the above attributes, we have secured a top notch position as one of the major Heat Pipe Cabinet Cooler manufacturers and suppliers in Gujarat, India.

• Brand Name: SARTHAK ENTERPRISES
• Frequency: 50-60 Hz
• Airflow: 0.29 m3/s
• Rated Voltage: 220-240 V
• Capacity: 1.5 Ton
• Refrigerant Type: R22
• Phase: Single Phase

The Frigid-X series Cabinet Enclosure Cooler for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Our Cabinet Enclosure Coolers are compact and can be installed in minutes through a standard electrical knockout. Nex Flow™ Offers  4 Types of UL Listed NEMA Rated Electrical Panel Coolers: Frigid-X Cabinet Panel Coolers NEMA Type 12 (IP-52) For Electronic Control Panels for General use in industrial environments where no direct liquid spray is applied to the unit. Stainless steel construction to hold up in corrosive environments. Frigid-X Cabinet Panel Coolers NEMA Type 3R (IP-14) For Electronic Control Panels for Outdoor Use. Stainless steel to hold up to rain, snow, humidity and general outdoor use. Frigid-X Panel Coolers NEMA Type 4-4X (IP-66) For Electronic Control Panels - splash resistant, for use in washdown environments as well as outdoor use. Unique patented design * for secure water tight protection. Stainless steel for food service and corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. Frigid-X Panel Coolers NEMA Type 4-4X-316L (IP-66)  The Patented* NEMA TYPE 4-4X-316L (IP 66) Frigid-X™ Panel Cooler are constructed of 316L Stainless Steel. Dust, oil-tight,spray resistant and used in environments where there are liquids and for food service and corrosive environments. Features Low in cost Compact No CFC's Fast installation Stabilize enclosure temperature and humidity Virtually maintenance free (No Moving Parts) Mounts in a standard electrical knockout Stops heat damage and nuisance tripping Eliminates fans and filters Prevents dirt contamination by keeping enclosure at positive pressure Units applicable to all environments including high temperature to 200°F

• Capacity : 350 Kcal/hr to 3000 Kcal/hr, Special Design on request
• Type of Mounting : Side, Top, Stand Alone
• Operating Conditions : Wide range of Ambient Temp. 8oC to 38oC inside Temp. 24oC to 36 oC
• Sheet Metal Body : Light weight body made out of MS/ Aluminum sheet Duly Painted
• Condenser & Cooling Coil : Made from imported high quality inner grooved copper tube
• Temperature Controller : Digital Temperature controller with High & Low Temperature Alarm

Herambh Coolingz is engaged in manufacturing and supplying wide assortment of Cabinet Cooleravailable with vapour compression refrigeration system that helps in controlling temperature, humidity and cleanliness inside control panel several machines. These are available in various capacities, mounting, and with temperature controller. Its exclusive properties and wide usage in various industries have made us one amongst the reckoned Manufacturers, Exporters and Wholesale Industrial Cabinet Cooler Suppliers from Maharashtra, India.

cabinet cooler, air amplifier, Stepper Motors, Stepper Motor, Solenoid Coil

cabinet cooler, compressed air products, vacuum generators, Safety Air Guns

cabinet coolers, Water Purifier, Water Cooler, ro coolers, water manifolds

cabinet coolers, air amplifiers, Adjustable Spot Coolers, ion air gun

Ultra Low Cabinet Coolers, Laboratory Ovens, Laboratory Incubator

cabinet coolers, Gantry Robot System, Tubular Linear Motor

Cabinets & Coolers, Condiment Holder, Glass Hangers, opener, Pepper Mill

cabinet cooler, Surface Finishing Discs, Non Woven Matt Mops

cabinet cooler, Zinc Flake Coating, Ammonia Air Cooling Units

cabinet cooler

Insulated Cabinet Air Coolers, ventilation contractors, Fan Coil Unit