Cable Tie Base Dealers

Accepts all Context Plus Xpert card stlyle smoke and heat detectors. It is a zero insertion force base with dual finger receptacles of stainless steel into which the detector terminals slide. Cable connections of up to 2.5mm diameter are made via captive cable clamps. Includes four double terminals (L1 = – line IN and OUT; L2 = + line IN and OUT; +R = remote LED positive supply; -R = remote LED negative supply) and one isolated single terminal that can be used to provide continuity of an earth or shield. XPERT cards, are supplied with all bases. Consult the coding guide to determine which pips are to be removed. Pre-printed and pre-punched address cards that save time and increase accuracy during commissioning are available in sets (part number: 45682-127). The base has a ‘one way only’ fit and detectors can be locked into the base by a grub screw with the aid of a 1.5mm hexagonal driver. 20DIsolating Base, XPERT style, 45681-321IMC or 45681-284IMC The Context Plus XP95 20D isolating base senses and isolates short circuit faults on loops and spurs. The base is loop powered, polarity sensitive and accepts the XPERT card to set the associated device address. In short circuit conditions, the integral yellow LED is illuminated. The detector associated with the base remains active under short circuit conditions. Power and signals to the affected section are restored automatically when the fault is cleared. Under normal operating conditions, a low impedance is present between the – IN and – OUT terminals of the base, so that power and signals pass to the next base in the line. If a short circuit or abnormally low impedance occurs, the fall in voltage is sensed and the base isolates the negative supply in the direction of the fault In applications where it is not necessary to use an isolating base for each detector, up to twenty devices (detectors and interfaces) may be installed between isolating bases, provided that their total switch-on surge current does not exceed 20mA. Circuits may include spurs, which should be connected between the spare –OUT terminal and the base L1 terminal. Spurs connected in this way appear directly across the loop on the output side of the isolating base. Short-circuit faults on the spur therefore short circuit the loop and vice versa. The effect of such short circuits must be taken into account in the system design and may require the use of extra isolating bases.

·         19mm and 25mm available ·         normal quality and 3m quality available.

• Material: PVC
• Thickness: 0.25 mm
• Color: White/Yellow
• Brand Name: Ortac(supaflex)
• Thickness: 0.25 mm
• Shape: Square
• Packaging Type: Packet
• Quantity Per Packet: 100 Pieces
• Mounting Type: Wall Mounted

• Material: PVC
• Length: 1inch And 3/4inch
• Tensile Strength: 65lb
• Width: 32mm
• Pack Content: 2x100 Cable Tie Base

• Brand Name: 3M
• Material: Nylon
• Color: Black/Beige
• Thickness: 0.229 inch, (Metric) 5.817 mm
• Features: Keep your wire or cable bundles organized in narrow spaces , Ideal for use with miniature, intermediate and standard cable ties , RoHS 2011/65/EU Compliant‎ .
• Width: 1 inch, (Metric) 25.4 mm
• Mounting Option: 4-Way Adhesive Mount
• Size: 0.99 Inch
• Slot Width: (Imperial) 0.21 inch, (Metric) 5.334 mm
• Cable Tie Base Length: 1 in, (Metric) 25.4 mm

• Material: Plastic
• Color: Black
• Country of Origin: Made in India
• Brand Name: SMC
• Packaging Size: 10 Inch
• Surface Treatment: Color Coated
• Packaging Type: Box
• Usage: Securing bundles in a limited space

We are offering mounting base. Mounting base type mbchk is used to make the components din rail mounted. It contains a tapped hole to enable the fixing of components on to a din rail.

• Features: Smooth and perfect finish, Quality high

• Material: Pvc Adhesive
• Brand Name: Sgi
• Features: Reliability , Rugged construction, Long life
• Length: 19 mm and 25 mm
• Size: 19 mm 25 mm

cable tie base, spiral cable glands, DC Brushless Compact Fan

self adhesive cable tie base, cable tie, Stretch Film, Bubble Sheets

cable tie base, Digital Multimeter, Electronic Sub Meter, Toggle Switch

cable tie base, Copper Cable Terminal Ends, Copper Ring Tongue Terminal Ends

cable tie base

Cable Tie Mounting Bases

3M Cable Tie Mounting Bases, 3M Scotchlok IDC Butt Connectors

cable tie base, Air Blower, plastic wall plug, Analog Multimeter

Cable Tie Mounting Base, Cable Nail Clip, reusable cable ties, cable marker

Mounting Base, Barrier Terminal Block, Bus Bar Terminal Block, Din Rail