Carbide Nozzles Dealers

The offered lot is prepared using the best in class raw material that is sourced from the reliable places only. Besides, we check it for quality prior to procurement. We are supported by an advanced packaging system and make use of only high quality packing materials for ensuring complete safety during handling, warehousing and transit.

• Material: Silicon Carbide
• Shape: Round
• Thickness: 15-20mm
• Application: Pipe Fittings
• Color: Black
• Feature: Corrosion Proof, Excellent Quality

• Material: Tungsten Carbid
• Shape: Round
• Application: Industrial
• Color: Grey
• Feature: Corrosion Proof, Durable
• Brand Name: Aerowheel Surface Finishing
• Pack Type: Box

We Make Tungsten Carbide Threading Nozzle For Welding Electrode Industrie. Tungsten Carbide Threaded Nozzles Form For Various Applications Such As For Wire Straightening, Wire Guides, Etc. We Are Using Latest Technology To Ensure Long Lasting Life And High Durability. The Manufacturing Process At High Speeds And Also Control The Concentricity Of The Flux Coating.

We are offering Tungsten carbide nozzles.

Tungsten Carbide Lined Angle CAM SeriesA CAM angle nozzle is designed to blast blind surfaces such as mold cavities or behind beams. Tungsten Carbide lined, the nozzles are available in one or three outlets. Description of OperationThe operator inserts the included nozzle washer into a nozzle holder and screws in the nozzle, turning it by hand, until it seats firmly against the washer.With all related equipment correctly assembled and tested, the operator points the angle nozzle at the surface to be cleaned and presses the remote control handle to begin blasting. The operator holds the nozzle 18 to 36 inches from the surface and moves it smoothly at a rate that produces the desired cleanliness. Each pass should overlap slightly.The operator must replace the nozzle once the orifice wears 1/16-inch beyond its original size.Advantages:Tungsten Carbide is the most rugged and durable liner materal and provides the best value.Has a 45 degree outlet angle and is available in one or three outlets.1-inch entry provides smooth transition

we deal in carbide nozzel.

• Material: Tungsten Carbide

We are reputed enterprises in this industry, manufacturing and supplying a wide range of Tungsten Carbide Swirl Chamber in Ahmedabad to our most prestigious clients. This is used in spray dryer to spray the liquid in the dryer. We have wide range of thickness available for Swirl Chamber. Its manufacture from the best suitable grade of material.

These nozzles are made of a solid piece of high grade super hard material. There are no joints, so as to ensure smooth path for wire travel. With a material hardness of 90HRA, it possesses an excellent balance between its wear resistance & being brittle. We select the tungsten alloy to manufacture the nozzles by precise polishing ends and hole inside. This material has a hardness over HRA900 and it also has been processed special lapping. In each process step, we use the latest inspection machine to ensure the wire's insu|ating |ayer not be suffered by any damage.Advantages : Precision : Concentricity between the clamping diameter and the outlet diameter is 0.01mm. Inner bore diameter’s tolerance is 0.01mm. Our precision wire guide nozzles are excellent for precise coil layering. Minimum friction : Every inner bore is fully polished. Both inlet and outlet radius are carefully calculated, shaped and polished to mirrored finish to eliminate scratching of the enamelled layer of wire. Extensive range : With over 3,000 types of carbide wire guide nozzles in our database, we keep stock for most of the common sizes in our inventory. High impact resistance High rigidity High hardness For special shapes and custom sizes such as motor nozzles, we can usually produce and ship within a week.We can also produce small quantities based on customers’ requirements.   TROPHY'S carbide nozzles W series is made of tungsten carbide material. with a hardness up to HRA90 and above, and bending resistance up to 2300N/mm. It has an excellent balance between the wear resistance and being too brittle. Each nozzle is made of a solid piece of material with no joints so as to ensure a smooth path for wire travel. The inner bore is ground and polished to Ra0.1. Both the inlet and outlet radii are scientifically calculated and processed to a surface finish of Ra0.025 ensuring smooth travelling and minimal stress to the wire during winding.   Concentricity between the clamping diameter and the outlet diameter is 0.01 mm. The inner bore diameter's tolerance is 0.01 mm. It is excellent for precision coil layering.   Example: W0530 – 030 - 0810 “W” - indicates nozzle materiel is Carbide The dimensions of above example is on below (mm): d1=d2=0.5, L=30, D=3, D1=0.8, L1=10 Manufacturing limitation : d1 to be > 0.1 mm, D1 to be > 0.3 mm

• Type: Shot Blasting Equipment
• Color: Available in Many Colors
• Warranty: 1year
• Material: Metal
• Application: Industrial
• Finishing: Polished
• Quality: Good

Working in assistance with a brilliant inventory management system and capacious storehouse has enabled us to entertain urgent and massive requirements of the customers. We state our payment terms on the invoice we sent to our clients. Moreover, our payment procedures remain simple and free from any sort of hassles. We offer both online and offline payment processing.

We are offering spray drying nozzle with good wear resistance grade in order to have optimum life. The special grades with fine graded carbide give additional quality to perform better. Can be manufactured as per customer̢۪s designs. Salient Features : Fine grain size carbide with high hardness. DurableCompact design Applications : Milk industryPowder industryShot blasting machine.