Carbon Analyzers Dealers

The Sievers M9 Portable Total Organic Carbon (TOC) Analyzer is the most versatile of the M9 TOC Analyzer Series, offering maximum flexibility for how and where it is used. Weighing just 9.4 kg (20.8 lb), it’s lightweight, compact design makes it a powerful troubleshooting analysis tool that can be installed online for continuous measurement or carried to any location in the water system. The M9 Portable is engineered for ease of use and cost-effective operation, allowing it to be used for single grab samples, with an optional autosampler, or in a process stream for continuous on-line TOC measurement. An unequalled level of efficiency and flexibility Operating Range – 0.03 ppb to 50 ppm Patented Membrane Conductometric Detection technology Meets Pharmacopeia requirements of USP, EP, IP and JP Fast, Smart and Versatile to Optimize Sample Processing time Touch Screen interface simplifies operation and data review Measures discrete grab samples, automated analysis with Auto sampler or online Optional Turbo Mode enables 4 sec measurement Optional 1st Stage Conductivity as per USP and EP for grab or auto sampler mode Designed for on-line cleaning validation applications Full compliance support for 21 CFR Part 11

• Number of IR cells:: 1 - 4

Measured elements: carbon, sulfur Samples: organic Furnace alignment: vertical Sample carrier: ceramic crucibles Applications: ashes, building materials, coal, coke, gypsum, limestone, oil, plant materials, rubber, sand, soils, soot, tobacco, waste, ... Furnace: resistance furnace (ceramic tube), adjustable up to 1550 °C (steps of 1 °C)

The Series 6700 covers a complete range of Total Organic Carbon (TOC) Analyzers capable of addressing a wide variety of industrial applications for process and environmental compliance purposes. Depending on the application, TAI can provide an recommendation as to which technique would be best suited to continuously detect TOC within your process. UV / Heated Persulfate Combustion Ozone Promoted Ultrapure Each configuration is available with an advanced Microsoft Windows-based computer with touch screen control. The robust and reliable Infrared CO2 analyzer is the heart of each design. It provides specific, interference-free CO2 detection, has no moving parts, and is extremely easy to access and service, as required. Depending on your specific needs, TAI is capable of providing a complete turn-key system solution suitable for use in hazardous, outdoor environments. Applications: Boiler feedwater; Cooling water; Wastewater; River water; Pharmaceuticals; Process control

• FEATURES: Very accurate , fast , process using latest microprocessor. Analysis within 2 to 3 minutes.

This is a Microprocessor based Digital System for Automatic Thermal Analysis & Temperature Measurement of Molten Iron. It enables in determination of % Carbon Equivalent, % Carbon and % Silicon of unalloyed cast iron.

• Driven Type: Electric
• Condition: New, Old
• Application: Lab Use, Water Influent
• Certification: ISO 9001 : 2015
• Type: Toc Analyzer
• Power: 220V AC <+10 % 50hz
• Fundamentals: Flow UV oxidation Conductivity
• Detect range: 0.1-1500.0 µ g/L 0.1ppb-1500ppb
• TOC precision: 0.1µg/L 0.1ppb
• Accuracy error: < + 5%
• Repeatability error: < + 2%/D
• Zero drift: < +2%/D
• Conductivity detection range: 0.055-6.000 µ S/cm
• Showing Data: TOC, Counductivity, temperature
• Response Time: Less than 15 mins
• Injection method: Self-priming peristaltic pump
• Reagent: No need
• Weight: 10Kg
• Dimensions (W*D*H mm): 300*200*180
• Ambient temperature: 0-40 degree Celsius
• Output: 60W
• Options: Online device, Calibration package, Autosampler
• Data storage: 5-year data (date measured 500 times)
• Display and operator: 5.6 inches screen
• Communicated: 4-20mA(External)
• Carrier gas: Carrier gas

We are Manufacturer of Carbon Silicon Analyser. It is manufactured from unmatched quality raw materials and following world class standard. Our valued customers can get it delivered at their doorsteps at their ease and comfort. Demand of our product is increasing day by day owing to its precise processing, high effectiveness and immaculate quality. We offer this safely packed product at affordable rate.

• Country of Origin: Made in India
• Area Usage: UO2/MOX analysis,Steels and Ferro Alloys analysis,Aluminium and Aluminium Alloy Analysis
• Model Name/Number: CS-TS
• Machine Type: Automatic
• Usage/Application: Steel and Steel Alloy Analysis,Refractory Metal Analysis,Ceramics,Superconductors,Rare Earths
• Brand Name: CIC
• Color: Grey,Blue
• Frequency: 50 Hz
• Electronic balance: Upto 100 mg with 1 mg resolution

Vasthi instruments carbon monoxide (co) analyzer measures ambient co concentration by employing non-dispersive infrared with gas filter correlation method technology. Key features • 14 meters optical path to perform high reliability • five years guarantee on gfc wheel • various outputs include ethernet and rs232 • user friendly interface with large screen • continuous system diagnosis with alarm • multi-tasking software allows viewing test variables while operating • temperature and pressure compensation • internal data logging with 1 min to 365 day multiple averages

• Brand Name: AARU
• Model Name/Number: AEX400-VER1
• Power Supply: Battery Operated

• Power: AC220V ± 10 50Hz
• Driven Type: Electric
• Feature: Accuracy
• Weight: 10-50kg
• Finishing: Polished
• Packaging Type: Carton Box

The SRV Multi Gas Analyser for Nox and Sox gases uses microprocessor control and Direct Extractive detection method to measure high concentration total oxides of Nitrogen (Nox), and total oxides of Sulfuric (Sox). The analyser delivers excellent sensitivity and reliability by using single measurement channel and gas sample accumulator to provide precise measurement of Nox and Sox artifacts. Advanced signal processing provides continuous measurement and NOX, Sox concentrations are corrected for fluctuations in gas temperature/pressure, flow rate and gases converter efficiency. Data can be displayed either in parts per million (ppm) or milligrams per cubic meter (mg/m3). Features : High concentration Nox/Sox measurement using direct extractive detection method. This analyser has been specifically designed for applications with Nox and Sox ranges of 0 - 2000 ppm or 0 - 300 ppm (option) Inbuilt large monochrome LCD display presents real time data, molybdenum converter efficiency, instrument status and historical information in a digital or graphical format. User selectable screens provide access to all instrument setup and diagnostics menus> Stored data can be retrieved via RS232, USB interface or the optional Ethernet connection and uploaded to a TCP/IP network. Ethernet option facilitates data download from an analyzer connected to the internet via a standard web interface. This feature also supports remote access to instrument parameters and the status output screen Auto zero pre-reactor control provides continuous zero function Inbuilt data logger uses Flash ROM with storage capacity up to 150 days of 5 minute data. It has facility to calibration functions like Auto Zero and Auto Span settings. Pre- Settable Sampling and Purging, data logging times Memory clear facility. Real time clock (RTC) facility. Ranges display : Auto-ranging 0-2000 ppm, (2), optional 0-300 ppm Resolution equals : 0.01ppm Analogue out : 4-20mA Temperature Range : 10ºC to 60ºC. Relative Humidity : 0% to 80% non-condensing. Digital Outputs : 3 to 5 LPM Digital Outputs : Multidrop RS232 port shared between analysers for data, status and control. USB post DB50 with discrete status, user controls and analogue output. Communication Port : Rear panel multi-drop RS232 port shared between analysers for data, status and control and front panel service RS232 port. Plus USB interface and optional Ethernet connection to a TCP/IP network via an RJ45 connector. Data logging : Supports internal data logging capability with storage up to 135 days of 5 minute data stored in flash ROM. Power : 230 V AC, 50 HZ

We are offering carbon silicon analyser. Weighing at 3.5 kgs only, the ferrolab excel carbon silicon analyser is easier to handle as compared to its bulkier counterparts. Available at attractive price, the ferrolab excel carbon silicon analyser is noted for its several advanced features like: thermal analysis of following parameters:delta-t temperature (dt)saturated carbon (sc)brinnel hardness (bhn)tensile strength (rm)carbon equivalent (ce)carbon (c)silicon (si)bath temperature (bt)undercool temperature (tu)thermal analysis of 10 iron grades permissible with configurable parameters of each iron grade type with special feature of iron grade mismatchingadjustable immersion time for bath temperature measurementmaximum process time for thermal analysis is 240 secondsdatabase storage of max 45 previous records of thermal analysis and 175 of bath temperature with date & timeresistant to noise and temperature impactmeasures thermal analysis of both channels and bath temperature at the same timeinput thermocouple channels & temperature range:k type – 2 channels ch 1 for tellurium and ch 2 for non tellurium cups temperature range - 950oc - 1370ocs/r type thermocouple for bath temperature measurement temperature range – s/r type- 1000oc - 1767oc

• Color: White&Blue
• Warranty: 1 Year
• Brand Name: Anatel
• Model Name/Number: PAT 700
• Machine Type: Portable
• Usage/Application: PW, UPW, WFI
• Dimension: 59.7 w X 22.9 d X 25.4 h cm (23.5 X 9 X 10 inches)

• Installed Capacity: 2000 Tonnes per annum with Induction Furnace.
• Range: Maximum melting capacity 700 Kgs, single piece

ACCEL foundry division is capable of producing various Grades Casting, SG Iron and Special high duty alloy casting for in house as well as outside customers' requirements. Fully equipped with on line Carbon Silicon Analyser for testing furnace metal composition.

• Features: Quality tested , Precisely engineered , Shear strength.