Carbon Black Content Tester Dealers

We are instrumental in manufacturing and supplying carbon black content apparatus. Used for adding carbon black content in a right amount to plastic materials, the carbon black content apparatus is reliable and have a longer life. As carbon black is essential filler in plastic materials, our carbon black content apparatus acts as pigment and an uv absorber. Although the level of addition is determined by the plastic�s behavior but, the apparatus needs to be well controlled as well. Thus determining the percentage of carbon black content in given polymer mass. The method consists of pyrolysing the sample in an inert atmosphere and considering the gravimetric difference. construction particularly effective for polyolefin and polyethylene, these carbon black content apparatuses comes with compact furnace with double thermal insulation along with imported high temperature quartz glass. Additionally, the temperature is controlled by electronic solid state controller and built in rate-of-rise device to avoid practically any over scoots and better temperature stability.

• Heating Load: 2 kW.
• Power: 230V AC, Single Phase.
• Accessories: Quartz Tube and Quartz boat.

To determine the % of Carbon Black (An UV Stabilizer) present in Polyethylene and Polypropylene compounds used for manufacturing of PE Pipes by “The Pyrolysis Process” used worldwide.

The Carbon Black Content Tester has been designed incorporating many features and new ideas. The apparatus conforms to the most generally recognised National & International standards including BIS, IS, ASTM etc.To determine the average of carbon black content especially in polyethylene materials by pyrolysis method, like plastic pipes, films, sheets, cables, water tanks etc, this equipment is very much useful for evaluation of Carbon Black Content. Carbon Black is used in plastic as UV stabilizer to prevent degradation of plastic by UV radiation. It is also possible to find out ash content in plastic material by this instrument.

Customers should stay rest assured with us for the payment procedures. They can pay us conveniently through wide-ranging payment mediums. With the aid of modern packaging system and deft professionals, we can guarantee safe and secure deliveries of products. Also, we make sure that the material used for wrapping them is of premium quality.

• Voltage: 220 V
• Capacity: 1 Kw
• Power Requirement: 230V AC, 50Hz, Single Phase
• Heating Load: 3 KW
• Required Time For Heating: 10 Minutes
• Required Time For Cooling: 20-30 Minutes

Features: Easy installation High in accuracy Portable Metal body Corrosion free Light weighted Rubber pipes attached Details : ESPM GS IEC IAS

• Power: 2-4 Hp
• Voltage: 220 V
• Display: Digital
• No of trays: 2.0
• No. Of Shelves: 2-3
• Temp. Range: 500 Degree C
• Frequency: 50 Hz

We have different payment options to choose from as per the convenience of the clients. In the type of operation processed online, the procedure depends on the gateway or processor model; both of them ensure complete security. We are the most promising name when it comes to Carbon Black Content Tester.   APPLICATION : Carbon Black Content Tester is used to test percentage of carbon content in plastic material. This test method is used to determine the average carbon black content in materials like sheets, plastic pipes, films, cables, water tanks.  

• Model No.: K-CBC-01
• Temperature Range: Ambient to 800°C
• Timer Range: Up to 999.9 Seconds / Minutes

CARBON BLACK CONTENT TESTER is widely used in plastic industry to check percentage of Carbon in Plastic material or finished products. Under the strict supervision of our well experienced Engineers Kant Plastology offers the innovative collection of CARBON BLACK CONTENT TESTER with adequate design of heater-thermocouple assembly and very smooth rise of heat with highly precise temperature control.The offered apparatus has minimum heat loss due to extra coating of heat insulation and its electrical components has also long life because its fitted at the bottom side of furnace.Our company procures all test related glassware accessories and chemicals to conduct the test with apparatus.

CARBON BLACK CONTENT TESTER is widely used in plastic industry to check percentage of Carbon in Plastic material or finished products. Under the strict supervision of our well experienced Engineers Kant Plastology offers the innovative collection of CARBON BLACK CONTENT TESTER with adequate design of heater-thermocouple assembly and very smooth rise of heat with highly precise temperature control.The offered apparatus has minimum heat loss due to extra coating of heat insulation and its electrical components has also long life because its fitted at the bottom side of furnace.Our company procures all test related glassware accessories and chemicals to conduct the test with apparatus.

We are leading Carbon Black Content Apparatus, Manufacturers, Suppliers & Exporters Located in Dombivli Dist. Thane, Mumbai India. As per ASTM D 1603, IS 4984 and IS 2530 Model: AE-CBCT-D Reference Standards: ASTM & IS.   Specifications : → Furnace size : 10 x 8 x 8 inch. → Temperature Range : Ambient to 1000 °C. → Temperature control system : Microcontroller based PID controller. → Resolution : 1 °C. Accuracy: ± 2 °C. → Accessories : Desiccator, Glass U tube, Combustion tube, Combust     Rotometer, Rubber tube [1 no. each], Glass end     Caps – 2 nos. and Glass traps – 3 nos. → Supply : 230 VACS/ 50 Hz. → Power : 1.5 KW. → Paint : Powder coated. → Special Feature : Compact with safe assembly for glassware's.  

• • Power :: 230 V 50 Hz, single phase
• • Size of furnace :: 10 inch x 8 inch x 8 inch
• • Material of construction :: M.S

Used to test percentage of carbon content in plastic material & to determine the average carbon black content in materials like sheets, plastic pipes, films, cables, water tanks. • Reliable Instrument with Low maintenance, High performance & Long service life • Furnace is made of duly powder coated mild steel • Relatively low operating wattage of the heater ensures that the furnace is long lasting.

• Power: 230 V 50Hz, single phase.
• Temperature range: Ambient to 1150 ºC
• Glass traps: 3 nos.

Specification : Size of furnace : 10 inch x 8 inch x 8 inch Material of construction: M.S. Accessories : Desiccator, Glass U tube, Combustion tube, Combustion boat, Rotometer, Rubber tube [1 no. each], Glass end caps – 2 nos. and  Paint : Powder coated.

• Temperature: up to 800 C.

Carbon black Content Test as per IS 2530 to test percentage of carbon Content in plastic material. This test method is used to determine the average carbon black content in materials like plastic pipes, films, sheets, cables, water tanks.Compact furnace to get temperature up to 800 °C with microprocessor based PID controller.

The carbon black content in any product is determined using the carbon black content apparatus. It is used on products like polyethylene and other plastic products. The test conducted by this apparatus is meant to detect the amount of carbon present in the material in its free state. The instrument is widely used in plastic and PET industries.   Carbon black content apparatus is used to determine the percentage of carbon black content in polyethylene and other plastic materials. The test is performed on the materials in which carbon is presented in a free state. As per the standard test methods, the percentage of carbon content in samples is measured by calculating the difference in the mass of test sample before and after the test procedure takes place in the machine. The laboratory test machine is designed and manufactured keeping in mind certain test methods like IS2530, IS 4984 and ASTM D-1603 to determine the content of plastics.  The test procedure is very important and protective to perform. It is widely used to check the efficiency of polyethylene materials. It helps to determine the test specimen in a static atmosphere in accordance with its gravimetric difference. The glass of the lab instrument is designed and constructed using a high–quality alloy to maintain the untimely fusions. The temperature of the machine is controlled by built-in electronic controllers to avoid practically for better temperature stability.  Carbon Black Content Apparatus is equipped with a tubular furnace made up of mild steel material. The temperature range of the furnace can be set maximum up to 1150 C. The relatively low wattage of the heater implicates the durability and long life of the furnace. Moreover, it is designed with a PID controller that drive the temperature in the allowable limits of +/-5. The apparatus is incorporated with a nitrogen flow meter along with the set of glass parts. Apart from this, there are two flasks that firmly hold the solid ice. The machine is supplied along with the combustion boat and tubes which are made of quartz glass. The properties of quartz glass is much better than borosil glass that easily bear the temperature   Features:   Provided with two separate glass flasks. The instrument is equipped with a programmable P.I.D. Controller. It is designed with quartz glass that resist high temperature. Low operating voltage ensures the longevity of the furnace. Specification:   Furnace Size is 6” x 6”x 6”. The temperature range is from ambient to 1150°C. Inner body is constructed with Stainless Steel and the outer body is constructed with Mild Steel duly coated with powder finish. Additional accessories are provided with the machine like Desiccators, Glass U Tube, Combustion tube, Rubber tube – 1 no., Rotometer, Combustion boat, Glass traps – 3nos., Glass end caps 2 nos. Operated on the power supply of Single phase, 230V and 50 Hz.  

• Power: Thermal
• Usage: Plastic Testing Machine
• Brand Name: SSI
• Place of Origin: Delhi, India

Temperature Range Ambient Temperature to 1000 D C, Temperature Resolution 1d C, Dimensions Height-510mm, Width-870mm, Depth-565m, Weight 60kgs(approx)

The carbon black content apparatus is equipped with a horizontal furnace which is constructed using mild steel material. The range of the furnace to heat it can be set maximum up to 115oC. It is a law watt of heater that implicates the long life and durability of the furnace. Also, it is designed with a PID controller that helps to set the temperature up to +-5oC. It is incorporated in a nitrogen flow meter along with the glass parts. Apart from this, two flasks can hold the solid ice firmly. The testing machine is provided to the customers with the combustion tubes and boats that are made up of quartz glass. The quality of this glass is far better than the borosil glass that can easily bear high temperatures. The device is also provided with some additional accessories such as Combustion boat, Rotometer, Glass traps – 3 nos., Combustion tube, Desiccator, Glass U Tube, Glass end caps 2 nos. that make the working of the apparatus easy.