Espey WD200 Carbon Floating Ring Seal
Get Price Quote
100 Piece (MOQ)
Features Torque transmission depending on application with set screw or as shrink fit Metallic coating (FMP 84) basically for applications without high oxidation Ceramic coating (EMP 98) basically for applications with high oxidation Design one- or two-piece Advantages Easy installation by split design (2-piece version) High reliability Long-term operation time Maintainability Operating range FMP 84 (metallic coating) General description: chromium carbide Coating process: flame spray technique (no influence on material structure) Shrink acceptability: very good Shaft diameter: d = 45 … 340 mm (1.77″ … 13.39“) Operating temperature: t = max. 1,000 °C (1,832 °F) Peripheral velocity: vu = max. 240 m/s (787 ft/s) Hardness: >65 HRC EMP 98 (ceramic coating) General description: chromium oxide (ceramic) Coating process: flame spray technique (no influence on material structure) Shrink acceptability: with restrictions Shaft diameter: d = 45 … 340 mm (1.77″ … 13.39“) Operating temperature: t = max. 600 °C (1,112 °F) Peripheral velocity: vu = max. 150 m/s (492 ft/s) Hardness: >58 HRC Materials 1.4021-FMP, 1.4086, 1.4462-FMP, 1.4571-FMP, others Standards and approvals DIN 42955
0.0
Website
Carbon floating ring seals
8,000 - 12,000 Per Set
5 Piece (MOQ)
CARBON FLOATING RING SEALS Carbon floating ring seals are used, if the application has a circumferential speed (sliding speed) above 40 m/s, normally for turbine and compressor applications. Installation is easy due to split design (dismantling of the shaft is not necessary). Easy replacement due to segmented seal ring design. Industrial Application: Chemical, Petrochemicals, Pharmaceutical. Face Materials: Carbon Metal Component: S.S 316L, Hastelloy C, Inconel, Titanium. Secondary Seal: FKM, EPDM, NBR, PTFE. Operating Limits: Pressure : 20 bar Temperature : -40˚C to 280˚C Speed : 150 m/s
Best Deals from Carbon Seals
carbon seal
2,000 Per Piece
3 Piece (MOQ)
Carbon Face Seals
Get Price Quote
We manufacture Carbon Face Seals which are used for water pump mechanical seals. Our carbon sealing face offers controlled hardness, close lapped surface and excellent resistance. The carbon seal faces also has a polished and finished surface and are ideal to be used as water pump seals and for all types of mechanical seals. We manufacture them as per customers drawings or samples. We have positioned ourselves in the midst of the most notable carbon mechanical seal face exporters from India.
carbon seals
Get Price Quote
Produced out of premium grade supplies, our entire range is quality assured and conforms to global industry standards. We have carved a dignified position in the market owing to our on-time and safe delivery of the orders.
CARBON VANES AND machanical CARBON SEALS
Get Price Quote
We manufacture following products for mechanicl use:» Ring & Bearings » Gland Packing Rings & Piston Rings» Graphite Blocks» Graphite Slide Rails » Vanes & Vane BladesMaterial:» CARBON Graphite. » CARBON Filled PTFE. » Resin Impregnated. » Antimony Impregnated.
0.0
View Profile
Antimony Carbon For Steam Rotary Joint Seal
1,800 - 2,000 Per Piece
05 Nos (MOQ)
0.0
View Profile
CARBON FILLED PTFE SEAL
40 - 150 Per piece
100 piece (MOQ)
We are offering carbon filled ptfe seal. Ptfe insulators, bearing bush, envelops, piston rings, hydraulic earth mover seals, gft pads, cft thrust pads for pumps, and all types of components for non-lubricates compressors or any ptfe parts as per clints’s drawing, specification and sample.
0.0
View Profile
Carbon Segment Seal
1,000 - 30,000 Per Set
1 No (MOQ)
The product range of ABACUS SEALS includes shaft seals and suitable accessories for both standard applications as well as tailor-made special designs, which are designed and manufactured according to individual operating conditions. These are new applications and retrofits (modernization or expansion of existing facilities). Older machines are often mechanically still in good condition, but some areas are no longer state of the art. In the case of seals, older sealing systems are often very maintenance-intensive and do not work economically with high leaks. With a retrofit shaft seal, the performance of machines can be significantly improved as part of a modernization.
Mechanical Seal for Pump (AE-Carbon Floating Ring Seal)
55,000 - 68,000 Per mm
2 Piece (MOQ)
0.0
View Profile
seal faces
200 Per Piece
50 Piece(s) (MOQ)
All type of mechanical faces SiC,Carbon,TC
Mechanical Carbon Seal
Get Price Quote
We have come up with the finest range of Mechanical Carbon Seals. These Mechanical Carbon Seals are used in various industrial applications and are fabricated as per the international standards. Our Mechanical Carbon Seals are known for accurate dimensions and are properly tested under strict industry norms. Features Controlled hardnessExcellent resistanceFine finishLonger service life
0.0
View Profile
Carbon Graphite Seal Faces
Get Price Quote
Resin impregnated Carbon Graphite Seal Faces is the normal rotary seal face material. Carbon Graphite Seal Rings has the advantage of excellent corrosion resistance, self lubricity, high coefficient of heat conductivity. in addition resin impregnated carbon has low permeability and good thermal conductivity
0.0
View Profile
carbon seal
25 Per Millimeter
Features: Excellent finish Superior quality Easy to use
0.0
View Profile
Dairies Seals
Get Price Quote
Specially formulated food grade carbon graphite sealing rings in mechanical seals ensure safe use in equipments and machineries used in dairies and other related industries.
0.0
View Profile
Carbon Rotary Joint Seal
Get Price Quote
Function of Rotary Union is to handle transfer of media such as Water, Steam, Air, or Oil from Stationery to Rotating equipment like Drums or indexing table which are widely used in Paper Mills, Printing, Rubber, Plastic and processing Industries. The most efficient way to connect the steam supply to rotating unit is by way of Steam Nozzle using carbon Seal Ring. Carbon is preferred material due to resistance to higher temperature sustainability and self-Lubricating properties and has excellent resistance to wear against good counter face material and beds in rapidly and does not score or wear the counter face material. Carbon being a high strength material with light weight is preferred. Carbon in Resin Impregnated grade as well as Antimony Impregnated Grade can be used and We use Carbon Imported from Germany which has consistency in manufacturing quality of carbon Over Local Source.
0.0
View Profile
Carbon and Graphite
Get Price Quote
We Supplies custom made Carbon Seals, Carbon Face parts, Carbon Shaft Sleeves, and Carbon Bearings also Carbon Strips in (Resin Impregnated and Metalic Impregnated Grade) by using Schunk Grades (West Germany) as below attached datasheets with prompt delivery. We also supply Mechanical Carbon Blanks (Resin Impregnated and Metalic Impregnated Grade).
0.0
View Profile
carbon seal
Get Price Quote
Riding on unfathomable volumes of industrial expertise, we are offering an extensive array of Carbon Seal. Offered seals are available in various specifications and are used where oil and grease lubricants do not work with corrosive liquids and gases helps in contamination by conventional lubricants that are to be avoided. Further, the entire range of Carbon Seals provided by us is mainly used for making carbon seals and mechanical seals. Features: Rigid design Accurate dimensions Fine finish
0.0
View Profile
carbon seal
Get Price Quote
Carbon sealing rings are used as the wear face of most mechanical seals for the sealing of fluids in all industries. APPLICATIONS ARE : Process pumps Rotary steam joints Seals for agitators and autoclaves Chemical pumps Cold and warm water pumps Corrosive liquid pumps.
0.0
View Profile
Post Free Ad
