Cathodic Protection Equipment Dealers

The clients in India as well as abroad can avail Cathodic Protection Equipment from us which is made using advanced technology. Cathodic Protection Equipment, we supply is obtained from the reliable vendors of the market, who make us assure the high quality and reliable make. As part of the Cathodic Protection Equipment, we offer Industrial Battery Charger, Electrical Control Panel and SS Junction Box. Our Cathodic Protection Equipment is further thoroughly tested on varied parameters before its delivery to assure complete satisfaction to the clients. Product Features And Benefits : The operation of the unit in this mode will be fully automatic and will be controlled by the reference electrode feedback. The unit will automatically maintain reference voltage or pipe to soil potential (P.S.P.) within 10mV of the set value under all conditions. The controller will maintain the structure protected to set PSP value under input supply variation, load current variation and external Changes. Reference selector logic selects the lowest (least protected) reference signal and maintains the protection level.Natural Air Cooled or Oil cooled Indoor or Outdoor, Wall mounted or Base mounted.AC Operated, DC Operated, AC/DC Operated and Solar Power Operated.Units are designed to work under severe environmental conditions with temperature range up to 55 C ambient & protection class upto IP55 / IP56 & IP65.All transformers are designed to give low losses and high efficiencies. The core material is high grade, high permeability and low loss CRGO silicon steel. The coils are wound with high conductivity, annealed, insulated electrolytic copper conductors. The insulation material used is of high standard to suit Class F grade. The Transformers manufactured and tested as per IEC76, BS 171 standards.Rectifiers are based on international quality diodes and Silicon Controlled Rectifiers. Rectifier circuits have different circuit topology based on customer need, specification and efficiency. Single Phase Bridge is used up to 5KW output and above that three Phase Bridge or hexa-phase with inter phase transformer scheme is used for higher efficiency.Rectifiers are designed and tested as per IEC 146 standards. Generally Following Protection Is Provided : Fast acting electronic over current limit & short circuit protection for output.MCB and / or HRC fuses in AC input, DC output for short circuit protection, overload protection & ON/OFF operation.Glass cartridge fuses in the live line of all lamps & in the auxiliary power lines to control circuit. Details Of Cathodic Protection Equipment : Air /oil cooledPLC/GSM monitored systems with IP 55/65 protection Product Range : Thyristorized Industrial Battery ChargesDCDB & ACDBCell BoosterFlex Chargers for Standloy/Automotive Battery initial chargingChargercum Reganeralve DischargersBattery Charge Discharge Systems Market Segments : PowerOil & GasMetalConsultants/ContractorsTelecom (Land Line/Wll) GSM Towers, etc) Different Configurations : Float oum Boost (FCBC)Float and Boost (FC & BC)Dual Roat oum Boost (DFCBC)Application/Customer specific configuration AC-DC Operated Units : Input Supply :Single Phase or Three Phase as per customer specification24V, 36V, 48 V DC Battery Supply as per customer/Specification Requirements.Outputs : Standard Ratings areDC Volts : 12, 25, 50 VDC Amp : 5, 10, 25, 50 A Additional Protections Are Provided As Per Customer Specifications Following One Or More Modes Of Controls Are Provided : The DC output voltage of the TRU in this mode is controlled in 24 symmetrical steps by means of a separate autotransformer with coarse & fine tapping. Autotransformer can have steps of 16, 24 or 64 as per customer specification.The DC output voltage of the TRU in this mode is controlled by stepless separate autotransformer connected in primary of main transformer.In this mode, the unit can be operated in either constant voltage or constant current mode. In constant voltage mode the DC output voltage will be adjustable from 0 to rated value in stepless manner by means of a voltage setter potentiometer. DC Voltage regulation will be better than 0.5%. The controller will maintain constant voltage at set value under input supply variation and load current variation to keep the structure protected.In constant current mode the DC output current will be adjustable from 0 to rated value in stepless manner by means of a current setter potentiometer. DC Current regulation will be better than 1%. The controller will keep current limited at set value under input supply variation and load current variation to avoid excessive current to the structure. Salient Features : Suitably designed for all types of Batteries – Lead acid, N-Cad, Vrla, Plant and AutomotiveSoft StartBattery path liming cuttentAutomatic Float Boost changeoverOperation under reverse input phase sequenceDropper Dioderegulator in load path for specific applicationInsulation class for magnetics as per IS standardCabinet fabrication using CNC machines – Enamel Paint/Powder Coat as per IS standards7 tank processed pretreatment of sheet steel enclosures as per IS/RAL standardsCathodic Protection Equipment, Electrical Control Panel and SS Junction Box. Following Additional Features Are Provided As Per Customer Specification : The Interrupter timer is used for carrying out ON/OFF CP survey using the current interruption technique. Isolated 4-20mA transducers are provided for DC output voltage, DC output current and pipe to soil potential (PSP). Potential free contacts are provided for monitoring critical alarms. Units can be remotely monitored with this facility and manpower cost can be saved.The parameter values can be remotely monitored using the GSM based remote monitoring system consisting of multi channel data logger with built in GSM Mobile phone interface. The data can be monitored using SMS over standard GSM mobile phone.The CP TR units can be monitored and controlled through PLC using serial communication. The PLC would be of a reputed make with international standards.All the critical parameters can be monitored as well as controlled remotely through the PLC. Construction : Enclosures are fabricated from CRCA MS sheet of up to 3.0 mm / 10 SWG thicknesses. Special type of enclosures made from Stainless steel, aluminum or glass reinforced polyester are also provided as per customer specification. Polycarbonate window is provided for viewing meters and indications. Lockable doors are provided in the front and back. Oil tanks are fabricated from CRCA MS sheet up to 3.00mm/ 10 SWG thicknesses. Control cabinet is fabricated from CRCA MS sheet up 2.5mm/12 SWG thicknesses. Oil tank is provided with oil filling inlet, oil drain, oil sight gauge & silica gel breather. Sunshades are provided as per customer specification. Enclosures are cleaned with seven tank process. Zinc rich primer is applied on cleaned surface and painted with coats of epoxy baked paint of desired shade. Special type of painting process like hot zinc spray or polyurethane paint can also be provided as per customer’s specification.

HIRECT make Cathodic Protection Transformer Rectifier unit (TRUs) comprise of Automatic, Manual & CVCC controlled. CP-TRU is used for cathodic protection of buried pipelines across the country,storage tanks at terminals refineries and other buried structures. TRUs are used to prevent submerged (Soil or water) metallic structures from corrosion. All submerged Pipelines (Oil, water etc.), concrete structure of bridges buildings sea ports etc can be protected from corrosion by doing CP.

• Part Number: 094T5N
• Condition: Refurbished
• Warranty: 90 Days
• Compatibility: Dell Poweredge R620
• Cable Description: Side-Band Cable

• Dimension: 36" x 24" X 24"
• Rectifier: 12 V 50 Ampere
• Cathode: Sponge Anode
• Anode: 200mm x 200mm
• Filer Pump: Circulation System
• Solution: Ideal for Gold Plating / Bombing Solution

Gold Recuperator From Eurotecniche.Gold Plating Left solution is precious solution. To recover metal left in the solution Eurotecniche has developed Special Gold Recuperator Machine which recovers Extra metal left form the Waste Gold Bath and thus you can recover all Gold from the Bath In-house without any hassle.

Cathodic Protection Equipment, Drilling Machines, Tapping Machines

Cathodic protection equipments, Monolithic Joints, insulating gasket kits

Cathodic Protection Equipment, Zinc Hull Anodes, Zinc Anodes

Cathodic Protection Equipment, Testing Equipment

Cathodic Protection Equipment, Flexible Rubber Shaft tool holder w-15-f-h 10

Cathodic Protection Equipment, Cable Markers, Cathodic Protection Anodes

Cathodic Protection Equipment, battery discharger, DUTY CYCLE METER

Heat Tracing and Cathodic Protection Equipments, process control equipments

Cathodic Protection Equipment, Manufacture of Air Preheater

Cathodic Protection Equipment, Polarization Cells, DC Power Supply System

Cathodic Protection Equipment, Mechanical interlocks