Cement Testing Equipment Dealers

• Flow rate of RO water: ≥1.5L/min
• Flow rate of UP water: 12 L/Hour
• Resistivity: 10-16MΩ-cm
• Fuse: 1 No. 100 MA
• Power consumption - Drive: 6 watts
• Stirring Plate: 130 mm dia.
• Power supply: 50 Hz., 230 ± 10% Volt AC

The double lever tensile testing machine for cement briquette is available in different ranges. Loading is applied automatically by lead shots flow in manually operated units and by a travelling weight on the lever in electrically operated model.

Cement and Concrete Testing Lab equipment manufacturers,exporters and Cement and Concrete Testing Lab suppliers Total length approximately 73cm. The tube has the sharp angular edge which conveniently pierces cement bags. An air hole of approximately 3mm dia is drilled on the near handle.

• GREEN: GREEN

Product Description: We offer high quality Cement Testing Equipment in the market. The special design of Cement Autoclave ensures easy heater replacement, even by one skilled man. The Autoclave is suitable for conducting accelerated soundness test on cements by the autoclave expansion test requiring constant steam pressure with the corresponding constant temperature. It consists of a stainless steel cylinder with a heat insulated cover, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The control unit consists of sensitive pressure regulator and pressure gauge, power switches and pilot lights for controlling the electric heating units. General Description: Quadruple walled construction, Inside S.S. Boiler, air insulation cover, Glass wool Insulation cover and outer cover Inside chamber dimensions - 10.5 cm dia. meter x 40.5cm height suitable for operation on 230 V, 50Hz, single phase, A.C. Supply Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in vertical position to expose them in the same manner The Pressure gauge is with calibration report with national traceability. Length comparator and shrinkage bar moulds (single two triple gang) are available at extra cost

Cement is the binder used to create concrete and mortar. Inorganic binders have had a role in the construction industry since pre-classical times and, after successive transformations, are today briefly classified as cements, limes and plasters. These binders, as well as being used singularly are often mixed in order to produce an end product, which meets the technical characteristics of the user. Today, the various types of binders are well known, particularly cements, and they are becoming ever more sophisticated with pre-mixed cements designed to satisfy specific structural requirements.

This is a brass tube approximately 53 cm long and 2.8 cm I.D. with a wooden handle. Total length approximately 73cm. The tube has the sharp angular edge which conveniently pierces cement bags. An air hole of approximately 3mm dia is drilled on the tube near handle. Total sample collected at one time is 300 cm approximately.

• Features: Self-contained shock-proof portable concrete beam tester accurately and easily determines flexural strengths of 6 x 6" cross-section test beams, Lightweight aluminium unit
• Brand: Humboldt/Avantech
• Payment Terms: L/C (Letter of Credit)/T/T (Bank Transfer)

• Voltage: 220-240 Volts,50 Hz,Single Phase,AC Supply
• Brand Name: EIE
• Model Name/Number: EIE
• Packaging Type: Wooden Box

• Type: Cement Testing Equipment
• Certification: ISO 9001:2008
• Color: Brown, Grey, Light White, White
• Voltage: 220V
• Application: Cement Testing
• Driven Type: Electric
• Warranty: 1year
• Automation Grade: Automatic

Cement sampler is an important cement testing equipments as the cement industry samples its product in many states and forms: slurry, liquid, powder, clinker, slag and finished cement. Cement Sampler Manufactured by us used to sample cement from packages. Its Made of brass, it has an outside dia. of 32 mm x 700 mm long

For the accurate testing of different natured cements, it is necessary to processed them through right machines. For that, we are introducing a wide range of Cement Testing Equipments that are designed, keeping the different applications of industries. The accurate designs, shapes, range, and fabrication of tools, done by experts, ensures the high utility factor of these Cement Testing Equipments. Offered Range :- RSEP-263 Rajco Vicat Needle Apparatus IS : 5513RSEP-026 Rajco Blain Air Permeability Apparatus IS : 4031, IS : 5516, BS : 4359 Part-IIRSEP-127 Rajco Le-Chatelier Mould : IS : 269, 4031 (P-IX) BS : 890, 915RSEP-209 Rajco Slump Test Apparatus : IS : 1199 : IS : 7320RSEP-016 Rajco Laboratory Cement Autoclave WITH STAINLESS STEEL CHAMBER 21 kg/cm-sq(pressure as per IS : 4031-1968, IS : 1624-1960) Used For :- Blain Air PermeabilitySlump TestingCement Autoclave

Cement Sampler is a brass tube approximately 53 cm long and 2.8 cm I.D. with a wooden handle. Total length approximately 73 cm.The tube has the sharp angular edge which conveniently pierces cement bags. An air hole of approximately 3mm dia is drilled on the tube near handle. Total sample Collected at one time is 300 cm3 approximately.

With the immense knowledge and experience, our company presents a comprehensive array of Cement Testing Equipment in the national market. Rooted in Delhi(India), the company is providing qualitative products and that too at the most reasonable prices.

For 100mm dia x 200mm long. Salient Features Specifications : Same as above but for cylinders 100mm dia x 200mm long. CYLINDER CARRIER : For carrying the concrete cylinders in the laboratory and in the field.. Cement and Concrete Testing Lab equipment manufacturers,exporters and Cement and Concrete Testing Lab suppliers Double handles make it easy to hold the cylinder during capping operations. Complete with snap clamp and cushioning lining. Can be used both for 15cm dia and 10cm dia cylinders. CAPPING MOULD : For capping the concrete cylinders, it consists of an accurately machined plate with a recess for 15mm dia specimen. WARMER : An electriacally heated and thermostatically controlled bath for melting the capping compound. Supplied with cover and handle. Suitable for operation on 230 Volts A.C. single phase. CAPPING COMPOUND : Used for Capping the ends of concrete cylinders to be tested. Available in packs of 5 kg. BOWL & LADLE : Metallic bowl is used to carry the capping compound and ladle is used to pour molten capping compound intothe gorves between specimen and capping plate. Supplied as set. civil lab equipments manufacturers

• Material: brass
• Size: 53cm long and 2.8 cm I.D
• Handle Material: wooden handle
• Total length: approximately 73cm.
• Total sample collected at one time: 300cm 3 approximately.

Industries also use these testing equipments to measure and test bitumen, finished components and laboratory equipment as well. Digital Compression Testing Machines and Specific Gravity Apparatus are bound to be the highly recommended apparatus and testing equipments. Industry has now changed its face tremendously to face the competition prevailed in the industrial domain. To achieve the said targets, industries are taking advantage of numerous equipments and instruments available in the market place. Nowadays, industry is wrapped with varied range of testing instruments and equipments including: Soil Testing Equipments Concrete Testing Equipments Cement Testing Equipment Bitumen Testing Equipments