Ceramic Resistor Dealers

• Application: Industrial,Machinery
• Certification: CE Certified,ISI Certified
• Phase: Other
• Condition: New
• Driven Type: Other
• Type: Ceramic Resistor
• Material: Ceramic
• Country of Origin: India
• Rated Power: 0-5Kw,5-10Kw

LUMENS INFOTECH 9819176568 1/4W 1% Tolerance Metal Film Resistors so 5 color bands, This is a great assortment for front ends and low power applications. These resistors are typical axial-lead metal film resistors, which have much better temperature stability than their carbon equivalents, Lower noise and are generally better for high frequency or radio frequency applications. Each bundle is labeled with the resistance value and packaged in Strip which easy to tear which make your work easier

• Material: Ceramic
• Application: Domestic, Industrial
• Weight: 150-200gm, 250-300gm
• Power Type: AC
• Frequency: 50Hz
• Feature: Auto Controller
• Phase: Double Phase, Single Phase
• Warranty: 1Year

Offered by us in several specifications, our products are in complete compliance with the quality standards. Our product range is secured properly with premium packaging materials that protect the products from mechanical damage and ensure the product delivery is safe and without damage.

• Ohmic Range: 0.01E - 50K
• Tolerance: ± 10% Lower Tol. available
• Power Ratings: 2-40 Watts
• Temp. Co-eff.: 50 PPM/100 PPM/ 260 PPM
• Dielectric Voltage: 2500 V
• Operating Temp.: 250°C Max
• Derate to Zero at: 250°C

Features : Economical Fire-Proof Case Completely Welded Construction High Resistance Values Available. Non-Inductive type Available. Constructions : These resistors are made by winding resistive wire on fibre glass cord or ceramic rods. Terminals are crimped or welded to end caps. This resistor assembly is then encapsulated in ceramic boat with high Temperature and fire retardant cement.

• Country of Origin: India
• Material: Ceramic, C410
• Certification: ISO9001:2015
• Application: Industrial
• Weight: 0-50gm, 100-150g, 150-200gm, 200-250gm, 250-300gm, 300-350gm, 350-400gm, 400-450gm, 450-500gm, 50-100gm
• Color: Grey, Light White
• Condition: New
• Color: Light White / Light Grey
• Product: Resistor Tube - Ceramics
• Size: 2" Long to 12" Long

We manufacture Ceramic Encapsulated Resistance which features impressive resistance and long life. Raw materials that we source from the trusted vendors are used as input in the production procedure and thus we check them against varied quality parameters before procurement. We are a quality centric company and have established a modern warehouse that is equipped with an up-to-the-minute inventory control system. This has helped us in maintaining the quality of the products for a longer time.

• Technology: Wirewound
• Operating Temperature: -50 degree to 200 degree
• Color: White.
• Rated Power: 1W & 3W & 5W & 10W & 15W & 20W.
• Brand Name: Prashant Resistors Company (P.R.C)
• Package Type: Throught Hole
• Temperature Coefficient: +/-50 ppm below 1K & +/- 100pm above 1K
• Resistance: 0.01 ohms to 5K
• Model Number: PRC Ceramic Series

• Material: Pure ceramic
• Power: 2-40 Watts
• Usage/Application: Electrical Industry
• Resistance: 1 Ohm - 10K Ohm
• I Deal In: New Only

• Series: CCV
• Range: 0.01E to 100K
• Power: 7 W
• Tolerance: 5 percent
• Ohmic Range: 10, 22 ohm joule

TThe WWB series resistors are wire wound resistors encased in ceramic boat with leads set for axial mounting. WWB series offer a wide range of resistors in the range 100mΩ to 10KΩ, with power ratings 1W to 10W.

We are primarily engaged in manufacturing, exporting and supplying of Ceramic Encased Resistor that we provide is available in OCE series. Our Ceramic Encased Resistor is made from high quality material, and therefore has excellent reliability. We can provide Ceramic Encased Resistor in bulk quantities. Clients can get Ceramic Encased Resistor from us at reasonable rates. Features No self ignition after applying non-flammable materials or in case current flows.Completely insulated for Printed circuit board mounting Precise resistance value with long life proofExcellent heat dissipation Small linear temperature coefficient Instant overload capability, low noise figure and no annual shift on resistance valueWinding core can be replaced by metal oxide film cutting core (MO) for high resistance value

• Feature: Excellent electrical and mechanical stability.

The KCA series are non flammable Ceramic Encased Resistors. The resistors are sealed in ceramic boats with special cement. This process make the resistors highly resistant to heat, moisture and have excel-lent mechanical strength, making them most suitable for various elec-tronic circuits.

Fusible resistor which fuse or blow if they are subjected to an abnormal spike of voltage current. SCF Series is a low cost resistor fusible resistor which provides circuit protection for overload or component failure. The resistor will open quickly under continuous load and prevent circuit board from damage and hazards, High Power dissipation in small volume, High surface insulation propert. Completely fire proof and welded construction, Available in PCB type and capacitor type terminals,Formed leads available on request. Low inductance type available on request Long leads (50 mm65 mm) also available for vertical mounting

• Application: All Electronic Items
• Condition: New
• Power Rating: Regular
• Packaging Type: Through Hole
• Max. Resistance: Regular
•  :  

Series CCA Range 0.01E to 100K , 2W to 20W Tolerance 1% , 2% , 5% Application Consumer Electronics Industry

• Features: Elegant look over whole range, Low temperature coefficient over entire range, High Power to size ratio, Low surface temperature.
• Power Dissipation: 200 watts
• Value Range: From R01 to 50 K
• Tolerance Options: From ±1% to ±10%

• Material: Ceramic
• Usage/Application: Electrical
• Dimensions: 8mm
• Resistance: Electrical Resistor
• Power Rating: 240 V

• Features: Highly durable, Consistent, Best performance

Our organisation offers a wide range of ceramic encased axial wire wound resistors . which has fully welded constructed body . these resistors come with encased heat dissipation. high quality standard and special solution from 'VRC' ensure our customers high performance resistors when they are dealing with electrical equipments in machines and projects , VRC can supply standard custom or to tally designed resistor solutions for any application from a few watts to several kilowatts. we design and produce resistors and resistor combination exactly to meet your requirements VRC is well equipped Q.C department with highly sophisticated testing equipment .

• Material: Ceramic
• Power Range: 12-50 W
• Model No.: C4J FU83X
• Resistance Tolerance: 5% -10%
• Temperature Coefficient: 400-700 PPM/ Degree C

Resistors wound on high alumina ceramic rods, fitted in steel caps having tin platted copper leads brass clips for terminations are encapsulated using heat proof chemical in ceramic boatspipes. Wide range available from 1 w - 40 w. Ohmic Values E01 - 100 K. Instant Overload capability. Excellent heat dissipation. Non-flammableheat proof chemical restricts self ignition due to flow of over current, then specified. For high resistance value, the winding core is replaced by metal oxide film cutting core (MO).

DC-DC Converters Automotive Direction Indicator Interface: RS-232, RS-485 Fire Detector Standard Logic - CMOS, TTL, LS PWM & SMPS Controller Regulators - LDO, AVR, SVR

We are engaged in offering a wide array of Ceramic Resistor for Machine tools to our valued clients. These products are widely demanded by our respected clients owing to its various salient features. Following the diverse demands of our clients, we offer our products in various sizes and designs. These products can be availed at market leading prices from us. Our product is acclaimed for their consistent performance and optimum quality. We assure safely delivery of these products.

Series CCA Range 0.01E to 100K , 2W to 20W Tolerance 1% , 2% , 5% Application Consumer Electronics Industry

• Material: Ceramic Casing with MO Film Element
• Resistance: 0.1 Ohm - 150K Ohm Range 
• Power Rating: 2W - 50W 
• Packaging Type: Corrugated Box
• Maximum Operating Temperature: - 55 Deg Cel - Upto 155 Deg Cel
• Termination Style: Screw,Wire,Lug Type
• Axial/Radial: Axial Preferred
• Lead Diameter: 0.65 mm-0.75 mm range
• Shape: Rectangular Cylinder
• Length: 60 mm For most use - Up to 90 mm 
• Size: 7mm- Upto 14mm Standard 19mm
• Tolerance: Standard +/- 1% - Up to +/- 5%
• Temp Coefficient: +/- 300 ppm/ Deg Cel

Metal Ceramic Resistors, Thyristors, Power Capacitors, Earthing Sticks

ceramic resistor, electronic spare parts, cement resistor, chip resistor

We deals in supplying of wide range of RF High Power Ceramic Resistor.

ceramic resistors, Resistors, power resistors, Diodes, Transistor

ceramic resistors, Diodes, Electronic Components, Electronic Goods