Clamp Carriers Dealers

Features Holytek clamp carriers are very simple and most efficient equipment - with maximum  rigidity and durability.  Every machine has a special  steel frame. large diameter shafts,  heavy-duty chains,  large cast iron sprockets, and an auto clamp carrier  rotation cycle,  all of which   help to minimize operator fatigue and maximise productivity. Our super heavy duty clamps with zinc plated corrosion resistant, 1”X2” rails and huge 7/8” screws provide super strength and durability. Clamps have a 3 ½” high jaw and with accessories will laminate up to 6” (optional). The rear jaw is quickly and easily repositioned for different panel widths. The Pneumatic Panel Flattener is designed to hold down the stock flat while each clamp is tightened. Hold down bars is designed for edge gluing these panels (of less than 20mm). They prevent the boards from springing out of the clamps during tightening (optional). The fully Automatic Clamp carrier is the ideal labor-saving device for high production. The automatic carriage traverse from left to right, flattening panels and tightening clamps that pass on the circuit. Used for edge, face, assembly and laminating gluing, the ready-to-apply glues are usually alphatic and polyvinyl acetate adhesives. These glues seep through the tiny wood pares and set the remnant compound adhering quite strongly under the proper polymer specifications, solvents, heat, etc.,

• Material: Metal
• Application: Industrial
• Feature: Durable
• Finishing: Polished
• Warranty: 3 Years
• Size: 8 or 14 section( 8'x4' section size )

Pneumatic Clamp Carrier is known for excellent performance. The basic concept of Pneumatic Clamp Carrier is its application using Pneumatic force. The Pneumatic Clamp Carrier that we offer has 16 sections for carrying 128 clamps in total. We precisely develop Pneumatic Clamp Carrier using advanced technology so as to ensure its superior capability. Technical Features : 8 or 14 section in each rotation Per section 6 clamps. Electric panel with auto & manual operate Pneumatic circuit 7 bars pressure 1"heavy duty pneumatic impact wrench air pressure: 7bar, free speed : 3500RPM & maximum torque : 1800 FT - LBS (2445N-M)

• Material: Brass, Metal, Stainless Steel
• Color: Black, Blue, Brown, Green, Silver, White
• Feature: Durable, Fine Finished, Good Quality, Low Maintenance
• Condition: New, Used
• Finishing: Color Coated, Polished
• Warranty: 1 Yr, 2 Yrs
• Usage: Clamp Carriers,Industrials
• Packaging Type: Corrugated Boxes,Poly Bags

• Model: J-2008H AND J-1408H
• Usage/Application: WOOD WORKING
• Weight: 6000KG
• Hydraulic Motor Power: 5HP
• Size: 2600MM X 1250MM
• Max Clamping Thickness: 10-90MM
• Revolving Motor Power: 1.5HP
• Number Of Clamping Rows: 8

• Type: Hydraulic Clamp Carrier
• Brand: KTCC
• Pressure Setting: Yes
• Phase: Three Phase
• Locking Mode: Pneumatic Motor Drive
• Model Name/Number: KCCMO
• Usage/Application: Industrial
• Operation Mode: Hydraulic Semi-auto
• Tightener Mode: Hydraulic motor
• Pressing Thickness: 90 mm
• Processing Fixture Length: 750 mm
• Frequency: 50 Hz
• Voltage: 415 V
• Max Clamping Width: 300mm
• Working Width: 2500mm /3100mm /3800mm /3800mm /4500mm
• Equipment Processing Width: 2500 mm
• Max Clamping Thickness: 150mm

• Condition: New
• Brand Name: Woodtech / Holytek
• Place of Origin: Taiwan
• Lead Time: As soon as possible

Features Holytek clamp carriers are very simple and most efficient equipment - with maximum  rigidity and durability.  Every machine has a special  steel frame. large diameter shafts,  heavy-duty chains,  large cast iron sprockets, and an auto clamp carrier  rotation cycle,  all of which   help to minimize operator fatigue and maximise productivity. Our super heavy duty clamps with zinc plated corrosion resistant, 1”X2” rails and huge 7/8” screws provide super strength and durability. Clamps have a 3 ½” high jaw and with accessories will laminate up to 6” (optional). The rear jaw is quickly and easily repositioned for different panel widths. The Pneumatic Panel Flattener is designed to hold down the stock flat while each clamp is tightened. Hold down bars is designed for edge gluing these panels (of less than 20mm). They prevent the boards from springing out of the clamps during tightening (optional). The fully Automatic Clamp carrier is the ideal labor-saving device for high production. The automatic carriage traverse from left to right, flattening panels and tightening clamps that pass on the circuit. Used for edge, face, assembly and laminating gluing, the ready-to-apply glues are usually alphatic and polyvinyl acetate adhesives. These glues seep through the tiny wood pares and set the remnant compound adhering quite strongly under the proper polymer specifications, solvents, heat, etc.,

• Material: Stainless Steel
• Weight: 1850 kg
• Automation Grade: Semi Automatic
• Usage/Application: Industrial
• Warranty: 1 Year
• Number Of Sections: 4

• Maximum Clamping Length: 2500mm
• Hydraulic Motor Power: 2.2 KW

SANDEEP Hydraulic semi-auto Clamp Carrier is ideal for the manufacturing of solid wood Chair Seat, Table Top. Door Panel, Floor and Furniture Board…etc. Very solid construction and easy operation machinery suitable for mass production for cold Edge gluing and laminating wood. * The most versatile and reliable Gluing machine for woodworking industry. * Caterpillar chain drives the moving of the clamp section rotary a select switch control for moving is on auto and manual model. * The clamp tightener’s with Hydraulic wrench is for rapid tightening and loosing of clamp. * The Panel Flattener is a Hydraulic hold-down stock while clamp are tightened.

Pneumatic Clamp Carrier, chemical treatment plant for wood

hydraulic clamp carrier, Double Surface Planer, Sliding Table Saw

Clamp Carriers, Plywood Making Machine & Wood Working Machine

Clamp Carrier, Wood Working Machinery, Hydraulic Pallet Truck