Clinch Studs Dealers

Studs are squeezed into an opening in a sheet to be introduced, this inserts the leader of the stud making a protected bolt into the sheet with high torqure-out and pushout protections.

• Material: SS
• Corrosion Resistance: Yes
• Material Grade: SS 304
• Head Shape: Round
• Surface Finishing: Polished
• Size: 4mm x15mm

• Material: MS-SS
• Brand Name: Ocean
• Size: All Sizes
• Quantity Per Pack: 1000

• Condition: New
• Material: MS & SS
• Application: Sheet Metal
• Type: Clinch Studs

All Size of clinching Studs Available.                                                                                                                                                                                                                   

FH (flush-head) Studs are installed by placing them in punched or drilled holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove - creating a flush-head assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.. Also available unthreaded on special order.                 Features :    TFH (non-flush) Studs are for sheets as thin as .020 inches / 0.51 mm. They may also be used in thicker sheets where flush head studs are not required. TFH studs are installed in the sheets in the same manner as flush-head studs; however, different punches and anvils are required. When installed, the TFH stud will be securely locked into the thin sheet with ample torque-out and pushout resistances. The stud head will not be flush but will project above the sheet surface approximately .025 in. / 0.64 mm.   HFH (high-strength) Studs replace weld studs with easier installation at lower costs. The large stud head which projects above the sheet material distributes the axial tightening force over a large area thereby improving pull through resistance.     HFHB (BUBAR®) Studs are ideal for applications which demand superior electrical/mechanical attachment points. Phosphor bronze studs offer twice the conductivity of carbon steel studs.       FHL (low-displacement head) Studs install closer to the edge of a sheet than standard studs without causing that edge to bulge. Depending on thread size, Type FHL studs can be installed from 25% to 50% closer to the edge of a sheet than standard self-clinching studs.     FH4 & FHP (flush-head) Studs for Sterols Steel are designed to provide strong threads in stainless steel sheets as thin as .040" / 1 mm. Type FHP studs have high corrosion resistance. Both types are designed for use in stainless steel sheets with a hardness of 92 or less on the Rockwell "B" scale.     TPS (flush-head) Pilot Pins satisfy a wide range of positioning, pivot, and alignment applications. The chamfered end makes mating hole location easy.     HFE (high-strength) Studs are designed with an enlarged head diameter to provide high-strength in sheets as thin as .040" / 1 mm.       Dog Point and Anti Cross-Thread Options.

• Brand Name: Harish Industries
• Country of Origin: Made in India
• Size: Customized
• Packaging Type: Box
• Features : Durable, Easy to install, Low maintenance needs

The Clinching Stud is a threaded fastener which incorporates a knurled platform under the head. When embedded in the sheet material, it displaces material into the clinch ring securing the fastener, Some of its Advantages are that it is easy to assemble with any squeeze press, has high torque resistance, causes no damage to decorative finishes on panels, has visual proof of security.

• Material: SS & MS
• Material Grade: MS , SS 304
• Size: ALL
• Quantity Per Pack: 1000
• Brand: SAI
• Head Shape: FLAT
• Packaging Type: BOX

Self Clinching Studs

The Clinching Stud is a threaded fastener which incorporates a knurled platform under the head. When embedded in the sheet material, it displaces material into the clinch ring securing the fastener, Some of its Advantages are that it is easy to assemble with any squeeze press, has high torque resistance, causes no damage to decorative finishes on panels, has visual proof of security.

• Material: MS
• Color: Silver
• Head Shape: Round
• Surface Finishing: Zinc Plated
• Diameter: 4 mm
• Length: 35 mm

Engaged in the supply and distribution of premium-quality Self Clinching Stud, we are responsible for fulfilling the expectations of our clients. These studs are dimensionally accurate. This helps in their convenient installation and maintenance. The non-abrasive and non-corrosive surface of these studs makes them a damage-resistant product suitable for rugged use. We offer them to clients at economical prices. Features: Easy to install Easy to maintain Durable

We have developed & manufacturing special type of force fit stud & presently supplying to Tier 1 customers for carburetor support assembly.

We are offering self clinching stud self-clinching stud are used for providing external threads in thin sheets. Available in steel, stainless steel and in sizes m2.5 to m10. Finish available is zinc blue.

It is a quick and safe fixing system. It gives answer to assembling problems on plates, folded sheet metal and thin walls, even when already painted. Self clinching are usually press-applied. They can be studs, nuts, stand offs or captive fasteners. They are available in steel, stainless steel and zinc plated steel.

• Material: MS-SS
• Brand Name: Ocean
• Size: All Sizes
• Quantity Per Pack: 1000