CNC Trainer Lathe Machine Dealers

able size 200 mm X 600 mm no. width of T slot 31228mm, Max safe load on table 100 Kg. Traverses X Axis 400 mm, Y Axis 150 mm, Z Axis 300 mm, Distance from Table to Spindle face 200 mm Feed Rates Cutting Feed Rates 01 – 4000 mmmin, Rapid feed Rates X,Y,Z Axis 222mmin Spindle Rates Speed 80 – 4000 rpm, Max Power 3 HP. Taper ISO 30, Single Tool, Manual Tool Changing System Accuracy Positioning ±0.05, Repeatability ± 0.05 Control System PC Base Mach3 CNC Controller. Or .. Siemens 808D CNC Controller. Others Total Connected Load 5 KVA, Power Supply 415V, 50 Hz, 3 Phase Defines G, M,T,F,I,S,J,K codes all necessaries & consumables standard, 4 set of high speed Input (50m sec), 1 set of Analog Output Signal Master Slave Mode, USB Disk Compatible Interface with PC through RS232, Graphical Simulation. User College Trainer Tool room Machine Shop, Diamaker.

• Height of centres. (mm): 100
• Distance between centres(mm): 310

Compact table top model, most ideal for trainng institutes.Machine with higher power suitable for steel cutting. Stepless AC drive for headstock. Hardened and ground spindle runs in precision antifriction bearings. Conventional FANUCSIEMENS CNC system controlled machine best suited to technical educational institutions and small shops. Recirculating Ball screw and nut arrangement for longitudinal and cross axis.

• Accuracy: 0.01mm
• Weight: 350 kgs
• Table size: 400*150mm
• Tool Dia: 5/6/8mm
• Product Code: ELSHADDAI CNC - 001

• Country of Origin: India
• Brand Name: 3D Technologies
• Driven Type: PC Based CNC Controller
• Voltage Rating: 220V
• Warranty: 1 Year
• Machine Structure: Horizontal
• Operating Type: Automatic
• Usage: Cutting
• Phase: Single Phase
• Power: 2
• Speciality: Robust Construction
• Type: PC Based CNC Trainer Lathe Machine
• Weight: 600 KG
• Condition: New
• Place of Origin: Mohali
• After-Sales Service Provided: Yes

• Operating Mode: CNC, Automatic, Semi-Automatic, Heavy Duty , Medium Duty , Old Gear Type
• Condition: New
• Center Height: 6 and 1/2 Inch and above
• Lubrication System: Automatic (Motorized)
• Max. Depth Of Cut: 1 mm Possible
• Table Size: 200 X 600 mm
• Minimum Increment: 0.001 mm
• Table Load Capacity: 100 Kg
• Lathe Machine Type: Horizontal Lathe

Salient Features Rugged Machine with Ground Bed. Stepper Motors with Powerful Stepper  Drive for both the Axes. Imported Ground Ball Screw with Zero Backlashes. Variable Speed DC Motor & Drive for Spindle Constant Surface Cutting Speed is Possible. Stick-Slip Motion is Totally Avoided. Totally Enclosed High Visibility Guard. Powerful PC Software for Graphic. Off line help Facility & Programming Facility. MDI Programming Facility. Display of Actual Feed Rate, Spindle Speed in Execution & Simulation Mode. Various Canned Cycles are Provided. Programmable Dwell. Automatically Detects Wrong Step in Programming. Safety Functions with Emergency Stop, Over Travel Limits. Alarm & Self Diagnosis Functions are Provided. Inch as well as Metric Programming. Subprogram with Repeat Facility. Manual & Programmable Machine Stop.

Our range of CNC Trainer Lathe Machine is manufactured from quality-tested raw material.These lathes can satisfy the various turning requirements of a very wide range of different Industries offering an affordable solution to higher machining accuracy and better surface finish. We also meet customized requirement for our clients benefit.

Being a customer oriented firm, we are engaged in manufacturing, exporting and supplying a high quality range of CNC Trainer Lathe. Our offered machine is manufactured using premium quality components and advanced technology by our skilled professionals. This machine is tested by quality experts using various testing parameters to ensure its quality and rigidity. Offered machine is highly appreciated by our clients due to its unmatched quality.   Features : Higher productivity Resistant against corrosion Rigid construction Salient Features Of CNC Lathe: Rugged Machine with Ground Bed. Drive to both Axes with Powerful Stepper Motors. Imported Ground Ball Screw with Zero Backlashes. Variable Speed DC Drive to Spindle with DC Motor. Constant surface cutting speed is possible. Cutting of free cutting mild steel is possible. Wear resistant Turcite material coating is provided on beds. Specially designed cross slide casting for Turret / Tool-post mounting. Stick-slip motion is totally avoided. Circular Interpolation is possible Best Dynamic performance with Ramp Function for Stepper motor drive. Totally Enclosed High Visibility guard. Machine is directly linked to PC hence loading of Program on Micro-controller is not required. Independent and Modular Power drives are provided for both the axes. Burn in components is used in controller which works at 150% load. Powerful PC software for Graphic. Off Line Help Facility & Programming also available. RHigh Speed integer interpolation system for Circular interpolation.• MDI Programming facility. Display of Actual Feed rate, Spindle speed in execution & simulation mode. All error codes are shown in the form of Graphics. Various Canned cycles are provided. Automatically detects wrong step in programming. All electronic cards are tested at 50 degree centigrade. Safety functions with Emergency Stop, Over-travel Limits. Alarm & Self Diagnosis functions are provided. Easy maintenance with spare card system by layman. User friendly & Detailed Operation and Maintenance Manual. Inch as well as Metric Programming. Subprogram with repeat facility. Manual & programmable machine stop. Single block Or Auto execution. Full New, Edit, Load, Delete & Print mode. Programmable Dwell.

• Automatic Grade: Automatic
• Layout: Horizontal
• Brand/Make: NOVA

• Voltage: 220 VOLT
• Country of Origin: Haryana,India
• Certification: CE CERTIFIED
• Brand Name: scientico
• CNC or Not: CNC
• Dimension(L*W*H): 1200 X 600 X 800
• Type: Turning Center
• Supply Ability: 50 Piece/Pieces per Month
• Condition: New
• Model Number: SC-E201
• Packaging Details: HARD WOOD PACKING

• Brand Name: EMCO
• Type: TURNING CENTER
• EXCELLENT: BEST
• Lead Time: may 2010 end
• CNC or Not: CNC
• Port: ludhiana
• Year: 1998
• Place of Origin: Punjab, India

We are main supplier of this product.

• Spindle Speed: 200-2500rpm
• Automatic Grade: Automatic
• Layout: Vertical, Horizontal
• Brand/Make: Diamond
• Bed Type: Hiwin LM rail
• Chuck Size: 80mm
• Voltage: 220v
• Weight: 200kg

  3 axis standalone cnc controller with spindle and mpg support 4.3" tft screen, resolution ratio：480*272 with 17 operational keys. support the usb flash disk to read the g code be equipped with mpg port and support digital display mpg as well as support the general mpg in the market support the panel key with single-axis manual operation, manual step and continued operations. machine dimensions: 610×485×395mm experiment application: engraving, drilling & cutting for wood,bamboo, pcb, pvc, pmma, plastics, abs etc. .

Technical Parameter: Process exact 0.015mm Swing over bed 140mm Distance between centers 250mm Spindle taper MT#2 Tailstock taper MT#1 Spindle taper 100-2000r/min ±10% Hole through spindle 8mm Max. positioning travel speed X：1100mm/min Z：1100mm/min Output power 150W Net weight/Gross weight 50/60kg Machine size 750x450x450mm Packing size 850x470x470mm

We manufacture, export and supply CNC Lathe Trainer Machine, which can be used for teaching the dual using of machinery and can determine the fault of the current. Our CNC Lathe Trainer Machine comes equipped with latest machinery. It comes at low cost and is made up of quality components and material that is used to build a durable and reliable machine. Specifications In the CNC Lathe Trainer Machine, the CNC lathe controlled by a PC and driven by step motor (or servo motor)It is suitable for turning cylindrical and taper faces, boring, grooving and cutting Features Of Our CNC Lathe Trainer Machine Functions of Automatic diagnosis and program power cut off protectionLongitudinal and cross feeds are effected by ball lead screws driven by step motorHigh SpeedEfficiencyStable performance

• Automatic Grade: Automatic, Semi-Automatic
• Voltage: 220 V
• Power: 1000 watt
• Frequency: 50
• Layout: Horizontal, Vertical

We are the manufacturers and supplier of this products.

• Turning diameter over bed (max): 140mm
• Center width: 250mm

Yash Machine Tools is not inhibited in supplying industrial workshop components only, we also supply safe, simple, and compact machine components specially destined for educational purpose. We have specific collection of educational machines which are designed as per the general preferences in Engineering Colleges and workshop training institutes. We are authorized suppliers of machines for educational training requisites. Our range of machines for training purpose includes the following:

• Automatic Grade: Automatic
• Brand/Make: Aiishil
• Layout: Horizontal
• Chuck Size: 100 mm (Dia)
• Power Supply: Electric
• Type of machine: CNC
• Features: Compact design, User-friendly operation, Durable construction

• Features: Quality Tested, High performance, Minimum maintenance
• Lathe Machine Type: Horizontal Lathe
• Max Swing Over Bed: 500-750 mm
• Max Spindle Speed: 3000-4000 rpm