CNC Welding Machine Dealers

• Basis: Epoxy resin steel-filled
• Specific Properties: Pasty, Fast-curing
• Mixing ratio by Weight % (Resin/Hardener): 100:13
• Pot-life +20oC (200 g Perpartion): 5 min.
• Density of the Mixture: 2,6 g/cm3
• Viscosity of the Mixture: 800.000 mpa-s
• Max. layer thickness per application: 10 mm
• Cure time mechanical loads: 3h
• Final hardness: 6h
• Mean Compressive strength (+25oC) DIN 53281-83: 70 MPa
• Mean Tensile strength (+25oC) DIN 53281-83: 14 MPa
• Mean Flex. strength (+25oC) DIN 53281-83: 21 MPa
• Strength E-Modul (+25oC) DIN 53281-83: 2.000 -2.500 MPa
• Shore D (+25oC) DIN 53281-83: 85
• Shrinkage: 0.03%
• Thermoforming Resistance: 50 Degree C
• Colour: Dark-grey

• Country of Origin: India
• Automatic Grade: Semi Automatic, Fully Automatic
• Type: Cnc Welding Machine
• Condition: New
• Driven Type: Penaumatic
• Warranty: 1year
• Voltage: 440 Voltage 3Ph

Complete solutions to automize the welding process like MIGTIGSub Arc is available as per the product and required production rate. • PLC Controlled panels to provide the flexibility in automations. • Maximum safety gadgets are installed to avoid accidents causing damages to production components, equipments, and or Operator. • System to evaluate cost of the weld, time, and recording of parameters are available. • We try to provide modular designs in SPM wherever possible. • Standard Components are used at max places so as to reduce the cost of inventory. • Infrastructure available for all Service Operation related need.

• welding: 0.2 mm

ProWeld laser welding machine offers a competitive advantage for today’s jewellery industry. Laser beam is pulsed at high frequency with high energy and laser power to weld. Even a semi-skilled operator can operate the equipment. It has become an generic equipment for signage, jewellery or medical tool manufacturing industry. HAZ (Heat Affected Zone) is extremely less compared to other conventional methods which helps to develop complex applications like pacemaker welding where it has electronic chip inside titanium case which than is welded without damaging the chip. ProWeld is an low maintenance & long life machine. ProWeld is capable of welding 0.2 mm size component to large size component. ProWeld uses fine welding technique to weld extremely complex work piece. Spot Welding, Butt Welding, Lap Welding can easily be done with ProWeld. It is widely used in aviation, aerospace, sporting equipment, medical, instrumentation, electronics, jewellery, automobile, mold making

• Type: Special Purpose Machine
• Voltage: 220V-380V
• Automatic Grade: Semi Automatic
• Driven Type: Electric
• Material: Mild Steel
• Finish: Coated
• Weight (kg): 200-500 Kg

We have delivered a 3 AXIS Resistance Welding SPM  which is used for manufacturing a 66 inches Round Jaali of SS/MS Wire. This SPM is capable of Winding the Wire and Doing Spot Resistance welding at programmed Location. The X-Axis and Z-Axis is the linear axis and Base AXIS which holds the Job is Rotary. The arrangement done for holding the job is a Pneumatic arrangement which firmly holds the job. Also, it consists of a pneumatic Job release Function.  Its a 3 Axis Machine with X-axis Stroke of 1000 mm Z-Axis is a Pneumatic Axis with 300 mm  A-Axis is a 360-degree Rotary Axis.

• Material: aluminum, stainless steel, brass, copper
• Capacity: 1.5kw
• Brand: Hindcam pvt. Ltd
• Driven Type: Electric
• Rated Power: 1-3kw
• Automatic Grade: Fully Automatic
• Voltage: 380V
• Type: laser welding machine
• Country of Origin: India
• Warrenty: 1year

Mig Welding = 25 nosRectifier Welding = 1noSpot Welding = 1 noArc Welding = 8 nosBaking Oven = 1 nosCarrying Oven = 5 nos

• Material: metal
• Brand: SLTL
• Driven Type: Electric
• Automatic Grade: Semi Automatic
• Certification: ISO 9001:2008
• Type: Laser Welding Machines
• Weight: 100-1000kg
• Country of Origin: India

With fast welding speed, high efficiency, small heat affected zone, high melting temperatures,  high heat conductivity and strong welding joints, the high-power laser welding machine NOVA  from SLTL has become an important piece of equipment to meet industrial laser welding requirements. NOVA is designed to give consistent strength and precision which not only enhances the quality and life of the material welded but gives visually flawless seams. One of its kind laser welding automation system, it can be integrated with jigs and fixtures to enhance productivity. For years SLTL has given the best Laser welding solutions for many Industries like Automotive, Medical, Tubes and Pipes, and Jewellery. SLTL Laser Welding Machine not only develops superior welding machines but also provides suitable welding application solutions customized for customers.  

CNC welding machine Wave control ensures less spatter. elegant weilding shape. smooth arc process. Self locking function to reduce labour intensity.

Modulares System anpassbar an undenwünsche, Bis zu 6 CNC Achsen mit Linear- oder Servo-Motoren, FDA und Mil-Spec konforme Datenerfassung, Automatische Laserleistungsüberwachung, Korrektur der Verfahrwege durch Bildverarbeitung.

• Pulse energy: 90 J
• Focusing optics: 150 mm

CNC laser welding machine high efficiency and an excellent beam quality. You can work either in pulse or in CW mode. The integrated performance monitoring device assures reproducible welds.The ALFlak systems offer many possibilities in the field of mobile laser- and repair welding: with its extended reach and bigger travelling range, welding positions in deep and complex shapes can easily be reached thanks to the long laser arm. All ALFlak laser systems are available in two versions: with a self-propelled caterpillar track or a model that can be moved manually.

• Cutting Thickness: Flame: 5

Precision rack & pinion drives on X & Y axis, Cutting capacity gas cutting : maxi 300 mm, Cutting capacity plasma : depends upon plasma power source, Automatic torch height controller suitable for both plasma cutting & oxyfule gas cutting. To maintain precise distance Between torch & work plate.

• productivity: 20 times

CNC welding SPM, there are 6 welding torches, simultaneously welding both the end-flanges to a square tube in 20 seconds. The rapid approach of the torches to the welding zone, actual welding and rapid retraction of the welding torches through suitably designed slides are through servo motors and drives. Servo drive ensures accurate movement repeatedly and helps maneuvering the feed rates as per the requirement. The linear slides consist of LM guideways, ball lead screws and box nuts for a smooth & friction free movement.Electrical system consists of servo motors and drives for the linear movements of the torches, which obey the commands from the combination of PLC & limit switches. Electrical system is well designed for an efficient auto-cycle of all linear movements and also job ejection through ejection cylinders after welding and retraction of the slides to the home positions. To take care of varying lengths of job, VFD controlled length adjustment mechanism is provided. A user-friendly HMI helps the operator to on-machining program editing easily and in a very short time. In this CNC welding SPM, there are 6 welding torches, simultaneously welding both the end-flanges to a square tube in 20 seconds. The rapid approach of the torches to the welding zone, actual welding and rapid retraction of the welding torches through suitably designed slides are through servo motors and drives. Servo drive ensures accurate movement repeatedly and helps maneuvering the feed rates as per the requirement. The linear slides consist of LM guideways, ball lead screws and box nuts for a smooth & friction free movement. Electrical system consists of servo motors and drives for the linear movements of the torches, which obey the commands from the combination of PLC & limit switches. Electrical system is well designed for an efficient auto-cycle of all linear movements and also job ejection through ejection cylinders after welding and retraction of the slides to the home positions. To take care of varying lengths of job, VFD controlled length adjustment mechanism is provided. A user-friendly HMI helps the operator to on-machining program editing easily and in a very short time. Except loading and unloading of the jobs, complete welding sequence, including job ejection after welding are fully automatic. Automatic welding machines produce good and uniform quality of welding consistently without being effected by any of the adverse factors of manual welding like fatigue, human error etc. Automated welding solution can boost up the productivity as much as 20 times.

• Automatic Grade: Automatic
• Voltage: 380 V
• Material: Mild Steel
• Output Current: 100-200 A
• Single Pulse Energy: 60 J
• Beam Diameter: 0.2 to 2 mm
• Power: 6 kW
• Pulse Frequency: 50 Hz

This electrode holder is Type 'B', semi insulated, heavy duty for use in project sites and workshops. Spatter protection guard of this holder is moulded from FR grade plastic. Its handle and lever is made of 'Paper Hylum' which ensures good heat resistant quality and ensures minimum welder's fatigue due to its light weight. This holder conform to IS: 2641.

Avail from the leading KUKREJA TRANSFORMER MFG. CO. a comprehensive range of Ultrasonic Products. The flawless range includes Ultrasonic Processors, Ultrasonic Cleaning System, Ultrasonic Testing Equipment and Ultrasonic Welding Machines. Being the major Manufacturer and Supplier in the industry, we carefully fabricate the Ultrasonic Products as per the standards only. Therefore, our Ultrasonic Products are highly appreciated in the national market, owing to their several distinctive features and better performance. Moreover, our Ultrasonic Products are used in different industries, like Automotive, Engineering, Packaging, Telecommunication, etc.

• Voltage: 220 V
• Country of Origin: Made in India
• Current: 35 Amp
• Automation Grade: Automatic
• Power: 260 W
• Frequency: 50 Hz
• Phase: Three Phase
• Laser Wavelength: 1064 nm
• Speed: 1300mm/s

• Material: MS
• Voltage: 440 V
• Capacity: 2000 Pieces/hour
• Automation Grade: Semi-Automatic
• Frequency: 50 Hz
• Output Current: 0-100 A
• Power Consumption: 2-5 kW
• Power Supply: Electric
• Warranty: 2 Years
• Laser Power: 20/30/50/60 W