COD Analyzer Dealers

• Material: ABS
• Wavelength: 639 nm, 591 nm, 518 nm, 468 nm, 400 nm
• Detector: Silicon Photocell
• Adjustment of the wavelength: Automatic
• Blank's measure: Electronic memorization
• Measure: Direct in concentration, in absorbance or intransmittance
• Signal interface: Numerical RS-485
• Connection: ODEON PC connection with software of transfer
• Indice of Protection: Ip67
• No. Of Parameters Analyzable: 50 parameters

• Model: HI83314
• Usage/Application: Wastewater
• Application: Industrial Use
• Connectivity Type: USB-A host for flash drive; micro-USB-B for power and computer connectivity
• Phosphorous Acid Hydrolyzable Range: 0.00 to 1.60 mg/L (as P)
• Phosphorous Reactive Range: Low Range 0.00 to 1.60 mg/L (as P) High Range 0.0 to 32.6 mg/L (as P)
• Phosphorous Total Range: Low Range 0.00 to 1.15 mg/L (as P) High Range 0.0 to 32.6 mg/L (as P)
• Photometer Colorimeter Light Source: 5 LEDs with 420 nm, 466 nm, 525 nm, 575 nm, and 610 nm narrow band interference filt

• Country of Origin: India,India
• Features: BOD COD TSS PH AND OTHERS PARAMETERS
• Material: SENSOR STAINLESS STEEL
• Type: Industrial use
• ONLINE WATER ANALSER AND WATER MONITORING SYSTEM: Online BOD COD TSS PH
• Type: Water Monitoring System
• Water analyser: 2 YEAR

VRN 700 series IOT based water analyzer to measure concentration of the constituents in quantity for characterization of water for different uses VRN 700 series COD BOD sensor is a new generation of environmentally friendly COD BOD sensor launched by our company. It requires no reagents, no pollution and more economical. Small size and easy installation and water quality monitoring is available online. Automatic compensation for turbidity disturbances with automatic cleaning for stability even long-term monitoring Water Monitoring itself includes a monitoring of lots of parameters like viscosity, flow, pressure difference, and many more. But we would like to mainly give focus on the three most important parameters of water like COD, BOD and TSS. These three parameters of water give the information about the dirtiness of water. So, measurement of these parameters is very important. UV – VIS Spectrophotometer techniques is basically a measurement of the absorption corresponding to wavelength of UV & VIS ranges of electromagnetic spectrum .In this technique the absorbance value is correlated with the concentration of organic consumed, bacteria, & suspended solids present in a water sample, which is denoted by COD, BOD and TSS. It has been researched that, UV – VIS spectrophotometer technology found to be one of the best possible technology for the measurement of the water parameters. Because of its low maintenance routine checkup, low cost, available for online monitoring purpose, No use of reagents, easy to install and understand & The most important thing is that result is almost correctly correlated with the actual results.

• Warranty: 6 Months
• Manufacturer: Skalar Analytical, Holland
• Performance: Optimum
• Maintenance: Low
• Usage: Industrial
• Durability: Long Life

• Material: Plastic
• Display Type: Digital Display
• Usage/Application: Industrial
• Packaging Type: Box

i::scan – the new miniature multi-parameter spectrophotometer probe will revolutionize online water quality monitoring: From very cost sensitive applications down to highly resolved “Smart Water Grids”, in small unmanned plants, or even in single building protection. The new i::scan combines the high performance of a multi wavelength spectrophotometer with even lower costs than simple photometers!

• Features: Good quality , Fine finishing, Reasonable prices

• Usage/Application: Industrial use
• Brand Name: AQUALABO
• Model Number: STAC 2
• Shape: Rectangular
• Power: 24VDC 0.5VDC 3A or 100 240V Optional 50 60Hz with External Power supply
• Weight: 18 kg
• Cat Number: STAC
• Gross Weight: @18 kg
• Minimum Order Quantity: 1 Piece

• Automatic Grade: Automatic
• Ambient Temperature: 10 Deg C to 35 Deg C 50,95 Deg F
• Measurement Principle: Attenuation,Transmission
• Measurement Technology: Light Source: 2 LED(254nm,530nm)
• Protection Type: IP68 NEMA 6P
• Sample Temperature: 2 to 40 DegreeC I
• System Compatibility: Modbus RTU
• T100 Response Time: 4s
• Turbidity Compensation: at 530 nm
• Accuracy: 0.2%
• Range: 0-2000 mg/L
• Material: Titanium
• Brand: Trios

Uniphos Online COD Analyzer COD (Chemical Oxygen Demand) is the amount of external oxygen required to oxidize all organic matter present in sample water. It is a measure of the quality of water and expressed in terms of mg of Oxygen consumed per liter of sample water (mg/L). The COD analysis using Potassium dichromate as oxidizer is one of the direct methods for COD measurement of organic matter in water.COD Limits are set by competent authorities for various effluents permissible for accepting them in Effluent Treatment Plants or for releasing them to the environment. Uniphos Online COD Analyzer is based on the use of Potassium Dichromate as oxidizer. The sampling process and measurement are automated to minimize human intervention. Online COD Analyzer comes with precision syringe drive system,a tiny digestion unit, air pump and blower. It is a PLC based fully automatic system with user friendly touch screen interface. Features    COD analysis based on sample oxidation using potassium dichromate  Measures the chemical oxygen demand by measuring the absorbance of Cr+3 generated  Ten times reduction in chemicals used as compared to traditional method  Ten times reduction in cost of analysis  Fully automated instrument with precision syringe drive system  Programmed automatic calibration facility  Can be co-related to BOD value. (Optional)  Data communication compatible with required SPCB/CPCB norms Application Area It is useful for the air monitoring at work place & confined space in Industries like: Municipal water Industrial process water Waste / Effluent water Ground /Surface water

• Brand Name: Sairupam Technologies
• Application: Industrial Use,Sewage treatment plant
• Minimum Order Quantity: 1 Piece

• Material: Stainless Steel
• Application: Cod Measuring
• Display Type: Digital
• Driven Type: Electric
• Feature: Perfect Strength, Rust Proof
• Warranty: 1 Year

Chemical Oxygen Demand (COD) is a term used to measure the quality of effluent water. COD is a measure of water pollution resulting from organic matter and is being extensively used by industry to test its wastewater before releasing it to the environment. Though, there are many chemical methods for analyzing this purpose, but each of them is both time consuming and requires a large amount of sample & correspondingly large amount of reagent chemicals; most of these chemicals are highly toxic and carcinogenic. In view of the stringent pollution control norms, there is an urgent need for a fast and cost-effective analytical instrument to keep track of the effluent water at different stages of its treatment process. To meet this demand of Chemical industry, we have come with a portable and microprocessor based instrument for the measurement of COD in effluent water – known as COD Analyser. The COD Analyser cuts down the analysis time from the present four to five hours to less than two hours. Also, the COD Analyser requires ten times less sample and correspondingly fewer amounts of chemical reagents cutting down the cost of analysis by ten times. Further, the COD Analyser is based on non-dispersive absorption spectrometry and is moderately priced and marketed by us. Why Our COD Analyser? Excellent use of microprocessors Quick analysis of Chemical Oxygen Demand in wastewater Easy to use

* LCD screen, easy to operate * Support to connect with PC through USB interface Features for BK-COD1 * LCD screen, easy to operate * Dichromate colorimetric method, LED light source, long service life * Two-point calibration (zero and full scale calibration) * Measurements can be displayed directly, needless to count * Support to connect with PC through USB interface * Date can be consulted, deleted and printed * BK-COD1-1 digester is standard accessory Features for Bk-COD2 * LCD screen, easy to operate * Coulometric titration method, without standard titrate solution, as well as the ferric sulfate * Optional electrolysis current: 10mA, 20mA, 40mA * Measurements can be displayed directly, needless to count * Date can be consulted, deleted and printed * Support to connect with PC through USB interface * BK-COD2-1 stirrer is standard accessory

• Material: Stainless Steel
• Brand Name: Uniphos
• Shape: Rectangle
• Temperature Range: 0-90 degree C
• Frequency: 50Hz
• Voltage: 230V
• Coated: Paint Coated

• Material: Plastic
• Brand Name: LOVIBOND
• Minimum Order Quantity: 1 Piece

• Power W: 1500

Raypa chemical oxygen demand (cod) quantification system. Microprocessor with 9 programs having 18 temperature and incubation time steps.