Cold Forming Machine Dealers

We are offering cold roll forming machine.

• Brand Name: Shree
• Voltage: 380V
• Weight: 5 Ton
• Material: Mild Steel (Body Material)
• Phase: 3
• Frequency: 50 Hz
• Pressure: 10-12 MPa

• Power: 9-12kw

We provide customized roll forming machines as per the client's specification of the profile needed. Kindly contact for roof forming machines, drywall-gypsum-pop channel machines, shutter slats, w beam barrier mills, u & c channel machines, slotted angles, lip channels, purlins, t grid, din channels, strut and stud sections etc. Almost any profile that is possible to be roll formed, we deliver it to you with precision. Online pre punching, notching, dimpling etc can be incorporated as per the profile demand. Leaving no scope of additional jobs to be done once the profile leaves the mill bed.

We offer our patrons a top-of-the-line range of Cold Roll Forming Machines that is fabricated under the supervision of our expert engineers. These machines are widely demanded in a number of industries owing to the premium quality of our products. Our machines are available at cost-effective rates and are strictly checked on varied parameters before the final dispatch.

We are offering 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll forming machine 850 cold roll formi.

• Size: 9300mmx2270mmx2400mm
• Total Weight:: About 12000kg
• Controlling System: PLC
• Forming Power: 7.5kw
• Bending Power: 4.0kw+1.5kw+1.5kw
• Cutting Power: 3.0kw
• Material of rollers: 45#steel, quenched HRC 58-62
• Material of roller shafts: 45#steel
• Material of cutting blade: Cr12 steel
• PLC Type: Siemens
• Step of rollers: 13 steps
• Feeding Width: 1000mm
• Effective Width: 850mm
• Thickness of the coil: 0.3-0.8mm
• The depth of the groove: 63mm
• Working speed: Straight sheet: 15m/min
• Arch sheet: 13m/min
• Sewing: 10m/min
• Max span: 38m

• diameter: 1/2"to 32

Our machine is designed for manufacturing elbow of 90,60,30deg.R=1.0D&1.5D with diameter from 12"to 32 of stainless steel .carbon steel.alloy steel and some kinds of copper steel.lt has individual power construction and electrical system.adopts PLC button centralized control and programmed touch screen operation system,which can be convenient adjusted and operated both manually and automatically.lt has special demoulding device and mould orientation device which make the mould change easy.lt has the features of engergy saving,easy operating,high quality for the products compare to hot forming process

Holding vast expertise and experience in this domain we have been able to manufacture and supply a wide assortment of Cold Roll Forming Machinery to our clients. Our offered range are manufactured using by excellent grade of material and available at industry leading price keeping in mind requirements of our client. Features: Quality tested Easy to operate Cost effective

We are offering roll forming machine, roll forming line, cold forming machine. gurukrupa industries is a leading and widely recognized manufacturer and exporter of roll forming machine, roll forming line, cold forming machine, tube mill, cold roll forming machine, pipe bending machine, ring bending machine, pipe polishing machine, d coiler, plate body type roll forming machine, and bending machine our products the success that we have assumed is indicative of our commitment to the superior quality of products and needs of the customers. We offer a gamut of products which include: roll forming machineroll forming line pipe mill slitting length cold roll forming machine cut to length bending machine plate bending machine pipe bending machine ring bending machine pipe polishing machine tube polishing machine tube bending machine

• Brand Name: Weldarc
• Automation: Automatic
• Surface Finishing: Polished
• Max Sheet Width: 400-600 mm, 600-800 mm, 800-1000 mm, 200-400 mm

The Mill consists of stages with steel fabricated Stress Relived Base. Housing stands are machied to close Tolerance. Shafts are made of EN24 material, flame hardened and ground. Top-Bottom Drive Gears and worm are made of EN24 induction hardened and ground. All the Bearings (22 Nos) are SKF.The Drive of the Mill from Main Gear Box in between Clutch/Break transmitted to an individual stages by chain coupling. Forced type lubrication provided by all moving parts. Panel Board provided with controls luch Forward-Reverse and Emergency stop in each stage.

• Forging force: 60,000

1.Non-oil self-lubricating bearings are qualified to improve the application life and abrasion resistance of the coupling shaft ,as well as reduce energy consumption. 2.Circuitry for the converter plus PLC,not only continuously variable transmission,the machine can work in automatic detection of the fault condition shutdown. 3.Using pneumatic air clutch to start the current,brake smoothly ,except to move the slider or the outside could stop time to stop after the death ,to provide maximum room for maneuver. 4.In order to decrease the pollution of hot-oil gas spray to the working environment, closed guard is designed and developed. 5.The machine set pressure oil line protection devices to ensure that all parts of the machines running the full lubrication. Set air way pressure protection device,overload protection of the machine, improve mold life. 6.Make sure the machine can be tested in convenience,then,for the security of the staff ,building safety protection door and teaching the operators to carry out standard operation are also of great importance.1. Manipulator rotating clip feed means,pneumatic clamping force, not only stabilityAdjust the pressure to the different productsto avoid the crush products.2. Top of the bodies after the individually adjusted before the dead point position and the same. 3. The way of ratch screw die ratchat is adopted in feed system which was quite reliable and convenient to adjust. 4. Because of the implementation of cross movement of the driven machine is by the use of double overhead camshaft which is above the transmission shaft, the operative compatibility of the machine is very easy.

PEB Steel Alliance also uses the Cold Form Process at the optimum level. PEB’s modern state of the art machineries facilitates the application of the cold forming process to the highest degree. PEB Steel uses the most superior quality steel with galvanized steel with G-90 (275 gmm2) zinc coating.

• Maximum sheet width: 1550mm
• thickness: 1 mm
• Size of machine: 6500 x 1100 x 1100 mm

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands. The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll forming machine we are manufacturing and exporting of corrugated sheet roll forming machine. These products are designed to reduce man power and stable steel base design. These machines are used in industrial sectors. Corrugated sheet roll forming machine are equipped with various features including en31 material hafts, elecon gear box, abb motors etc. Corrugated sheet roll forming machine can process sheets of any required length which can be easily programmed. D coiler 5 ton cap. Entry gate with roll forming line with 18 stations, 10 h.p. Electrical. Control panel semi auto cutting unit (hydro.) technical specifications of roll forming machine maximum sheet width that can be formed : 1250 mm maximum sheet thickness in crca strips that can be formed : 1.2 mm horizontal distance between shafts : 500mm number of forming stations : 16 nos. Total hp for line : 8 speed of the machine : 10 -14 mt mint size of machine : 9500 x 1700 x 1100 mm mandrel uncoiler coil weight : 5 mt max coil width : 1250 mm coil bore : 450 mm min, 510 mm max dia. Mandrel movement : manually adjusted back tension : manually adjusted entry gate entry gate will be provided for movement of sheet to roll former. Main base the main base is ms fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

• Automation Grade: Automatic
• Job Thickness: 0.5-1 mm
• Max Sheet Width: 1000mm to 1250mm