Computer Monitoring System Dealers

Our payment procedures are hassle free, safe, and legal. We do not impose hidden charges while creating the invoice and ensure your money is transferred securely from you to us. Recognized amongst the famed names in the market, we are capable of delivering quality Centralized Control Monitoring System to the customers.   ZigBee Protocol : ZigBee is an IEEE 802.15.4 based specification for a suite of high-level communication protocols used to create personal area networks with small, low power digital radios.   Its low power consumption limits transmission distances to 10-250 meters line-of-sight, depending on power output and environmental characteristics. ZigBee devices can transmit data over long distances by passing through a mesh network of intermediate devices to reach more distant ones. ZigBee is typically used in low data rate application that require long battery lift and secure networking (ZigBee has a defined rate of 250 kbit/s, best suitable for intermittent data transmissions from a sensor or input device.   Zigbee Gateway Features : Support for multiple network topologies such as point-to-point, point-to-multipoint and mesh networks. Low duty cycle – provides long battery life Low latency Direct Sequence Spread Spectrum (DSSS) Up to 70-100 nodes per gateway Individual lamp control Collision avoidance, retries and acknowledgments Remote monitoring and control Dimensions : 110(L)X150(W)X70(H)mm Mesh looping Enclosure : IP65   Zigbee Nodes : These are the low coat wireless controller devices that sits on every street light Luminaire.   Nodes are responsible for transmitting all important partameters to control lighting parameters.   Inclues status of the light whether it is ON/OFF, energy consumption, current dimming level, fault data etc.   Zigbee Nodes Specifications : Operating Voltage : 3.3VDC Dimensions : 25(L)X35(W)X10(H)mm Transmission Range : 50mtrs for indoor , 250mtrs for LOS   System Available with : Smart LED Driver available for 15W, 25W and 40W. Light more than 40W can be driven by using multiple drivers. Zigbee Gateway. System Software

Free web portal for system monitoring Plug and Play When the Ethernet interface of the coolcept inverter is connected to a router, the data from the data logger of the inverter is sent directly to the StecaGrid Portal. Setting up the portal is easy: Follow the link below to the system data entry mask. In addition to system output, the modules used and the location of the system, the serial numbers of the installed inverters are queried. On the StecaGrid Portal, up to 5 coolcept* and coolcept-x inverters can be combined to one system. The data of the individual devices are added up and displayed as a complete system. Free use for two years If the system operator agrees to having his system data published on www.solare-energiewende.de, the StecaGrid Portal (offered in collaboration with meteocontrol) can be used free of charge for two years. Afterwards for further optional use, which is not free of charge, he will receive an offer. Clear presentation of yield data The software interface is very clearly structured. In addition to the system data, yield data is displayed in daily, weekly, monthly and annual profiles. A scale evaluates current yield data of the system in comparison to values from other systems in the same region. This allows the user to determine at a glance whether the system‘s yield lies above or below the regional average. The display also shows the user‘s environmental contribution in terms of CO2 saved due to yields. Smart networking Monitor the output of your PV system for free with the StecaGrid Portal. With the intuitive user interface, you can access your yield data anywhere and at any time – even from your smartphone or tablet PC.

• Country of Origin: India
• Brand Name: UNISSI
• Automation Grade: Automatic
• Pumping speed: 25 to 840 m3 /h
• Ultimate pressure: 0.5 mbar
• Vessel volume: 60,160,300,500 or 1,000 liters
• Control type: Control t BASIC or Full Featured

It provides the required suction and the planned flow of medical vacuum for needs of vacuum suction. A very important part is treatment and cleaning of contaminated exhaust air. Therefore, it is necessary to equip each vacuum station in automatic model with perfect antibacterial filter and dirt arrester.

• Min. Order Quantity: ,

We hold specialization in supplying Central Nursing Station in the market. We construct the Central Nursing Station in compliance with the set norms to meet the multiple needs of Medical Industry. We use advance technology for assembling Central Nursing Station for the high performance and long working life.    Features Windows based operating system for 8/16-beds Multiparameter mode for detailed view of any bed Multi-bed mode for simultaneous view Upto 72 hrs of full waveform disclosure Alarm acknowledgement facility  

Simultaneous Vital parameters monitoring upto 64 patients Continuous monitoring upto 72 hrs per bed with automatic storage Dual display facility for easy viewing Flexible screen configuration Standard RJ 45 internet working Wireless LAN network connectivity (optional)

Plug and Play When the Ethernet interface of the coolcept inverter is connected to a router, the data from the data logger of the inverter is sent directly to the StecaGrid Portal. Setting up the portal is easy: Follow the link below to the system data entry mask. In addition to system output, the modules used and the location of the system, the serial numbers of the installed inverters are queried. On the StecaGrid Portal, up to 5 coolcept* and coolcept-x inverters can be combined to one system. The data of the individual devices are added up and displayed as a complete system. Free use for two years If the system operator agrees to having his system data published on www.solare-energiewende.de, the StecaGrid Portal (offered in collaboration with meteocontrol) can be used free of charge for two years. Afterwards for further optional use, which is not free of charge, he will receive an offer. Clear presentation of yield data The software interface is very clearly structured. In addition to the system data, yield data is displayed in daily, weekly, monthly and annual profiles. A scale evaluates current yield data of the system in comparison to values from other systems in the same region. This allows the user to determine at a glance whether the system‘s yield lies above or below the regional average. The display also shows the user‘s environmental contribution in terms of CO2 saved due to yields. Smart networking Monitor the output of your PV system for free with the StecaGrid Portal. With the intuitive user interface, you can access your yield data anywhere and at any time – even from your smartphone or tablet PC.

RS 485 Converters - SCOM-USB The PC-Remote Monitoring System (PC-RMS) is used to display, monitor, and configure the working parameters of SmartHarvest products. It is used to monitor connected devices to RS-485 bus. For SCCM series of products, PC-RMS enables the users to customize and configure a wide range of parameters. User can run this software in Microsoft Windows®, workstation or notebook. It is supported by custom communication hardware (SCOM-USB) to interface with the device to be monitored. Product Highlights Enables live data monitoring with a real time clock. Provides charge controller parameters in graphs and tables. Provides alert and indication for panel voltage, battery voltage, unit temperature, etc. Provides data table to view the parameters of charge controllers after every poll. Enables customization of the polling interval time from seconds to 1 hour. Enables configuration of battery settings, night light settings, identity settings, charging current for battery, and battery equalization charge for SCCM charge controllers. Enables to view the Exports logged data (.csv) in Microsoft Excel® or equivalent spread sheet application. Provides long term storage without memory limitation.

we are offering pc/plc based control & monitoring system with our rich industrial experience, we hold substantial expertise in designing pc/plc based control & monitoring system. the pc/plc based control & monitoring system, we offer, is much appreciated by the clients for its efficient performance and latest configurations. the pc/plc based control & monitoring system is demanded by the clients owing to its highly efficient and user friendly design. features of our pc/plc based control & monitoring system efficient performanceauthentically configuredhighly efficientuser friendly

Sailent Features : Windows based operating system for 8/16-beds Multiparameter mode for detailed view of any bed Multi-bed mode for simultaneous view Upto 72 hrs of full waveform disclosure Alarm acknowledgement facility

• Features: Rugged design , High strength , Easy to install .

• Power: 120- 240 V AC Or 24 V DC
• Panel Size: 10
• Warranty: 2 Year limited warranty

Simultaneous Vital parameters monitoring upto 64 patients,Flexible screen configuration,Continuous monitoring upto 72 hrs per bed with automatic storage,Standard RJ 45 internet working,Dual display facility for easy viewing,Wireless LAN network connectivity (optional)

• Brand Name: Conteg
• Display Type: Digital
• Power Input: 7.5 V DC
• Supply Voltage: 230 V
• Digital Inputs: 5 V DC
• Weight: 4.41 lbs,2.0 kg

The Central monitoring systems – Skyline 55, Skyview mini and Skyview are advanced solutions for the clinician to constantly monitor his patients remotely at all times. Advancements like Server based Remote Monitoring (Skyview Mini and Skyview) ensure that a doctor can remain in touch with his patients real time during emergency situations. The advanced server system of Skyview links the Monitor data across the Hospital LAN and the Web (through Broadband ) transmitting the data real time for the doctor to access anytime and from anywhere.

computer monitoring system, Computer Services, ups repairing service

computer monitoring system, Alarm System, automatic charging system

central monitoring station, alarm panels, External sounder, Panic Switch

pc monitoring system, Access Control Systems, biometric readers

Central Nursing Station, Dental Products, Electro Surgical Units, Syringe

central monitoring station, wireless cctv, Counterfeit Money Detectors