Concrete Trailer Pump Dealers

• Engine Rating: 35 KW
• Nominal Speed: Up to 2300 RPM
• Pumping Cylinder: Up to 180 mm
• Pumping Cylinder Stroke: Up to 1000 mm
• Stroke: Up to 24 counts per min
• Theoretical Output: Up to 36 cubic meters per hour
• Concrete Pressure: Up to 65 bar

• I Deal In: Second Hand Only
• Brand/Make: Putzmeister
• Model Name/Number: BSA1407

Drive  The motor (Diesel or Electric) drives the axial piston pump via a flexible coupling. Due to automatic output adjustment optimum  utilization of the motor power, resulting in low energy   consumption at  differing   pumping   condition. Additionally the concrete flow can be manually  adjusted. The pump operates in a proven open circuit. The  maximum   placing   output   and  the   pressure   are determined  by the construction sites. Between these two values automatic  adjustment  by  the governor   occurs maintaining  a  constant  output  depending on  the  power available from the installed drive motor. Design The portable concrete pumps are assembled in the unit construction system.  The main assembly groups are: Frame, Power unit, Concrete pump kit, Control block, Hydraulic tank and Hopper with agitator. The Frame & Axle  The frame, in compact execution, is constructed from standard vehicle profiles. The pump is mounted on heavy duty single axle chassis with draw bar, pneumatic tyres and for travelling on construction sites at up to 25 km/hr. Control System  The fully hydraulic control system is integrated within the drive. The compact control block and minimal hydraulic lines makes the equipment reliable and durable. The differential cylinder has trouble free piston rings and automatic constant stroke maintenance. Both gate valves change independently so that even when full change over is prevented by foreign material or similar obstructions  in the concrete, the pump continues to operate without problems. All components are especially developed and manufactured to withstand the rough treatment on construction sites. Control Housing Ideal flow conditions in the control housing resulting in superior placing proper ties also incase of concrete low on sand and fines, stiff consistence or crushed aggregates. Simple tilting of the output pipes enables easy control and cleaning of the concrete conveying path and the gate valve parts. Pumping Material Pumpable concrete, within any consistency range down to a water cement ratio of 0.4. Even concrete with aggregate grading up to 40mm can be conveyed  trouble  free with the concrete  pump through a 125mm diameter pipe line.   Flat gate valve The  two flat gate  valves working   independently  have  been especially developed for pumping concrete. Their working system with automatic adjustment permits trouble free pumping even with badly worn parts. Integrated Control Block  The hydraulic control system is integrated with in the drive. The compact  control  block  & minimal  hydraulic  lines makes  the equipment reliable & durable.

• Weight: 4160 kg
• Filling Height: 1400 mm
• Usage/Application: Buildings
• Hopper Capacity: 500 L
• Model Name/Number: HBT50.10.48RS
• Concrete Cylinder: 180x1250 mm
• Capacity: 4 Cylinder
• Engine Power: 48.5 kW
• Max Aggregate Diameter: 50 mm (Pebble), 40 mm (Crushed Stone)
• Max Theoretical Output: 55/30 m3/h
• Max Theoretical Concrete Output Pressure: 50/100 bar
• Strokes: 28/15 per minute

• Weight: 5600 kg
• Features: High pressure ensures less choking, Efficient & optimised pumping kit to support various types of concrete mix
• No. Of Strokes: 35 per min (Rod Side),20 per min (Piston Side)
• Brand: Ajax
• Concrete Pressure: 66 bar (Rod Side),119 bar (Piston Side)
• Concrete Output: 105 cu m/hr (Rod Side),60 cu m/hr (Piston Side)
• Engine Power: Diesel Engine 6 cylinder Water Cooled 170 HP,TI @ 2200 rpm

• Country of Origin: Made in India
• Power: 100 HP
• Model Name/Number: SP 1400
• Brand: Schwing
• Capacity: 1.5 Ton
• Automation Grade: Semi-Automatic
• Speed: 11p RPM

The motor (Diesel or Electric) drives the axial piston pump via a flexible coupling. Due to automatic output adjustment optimum utilization of the motor power, resulting in low energy consumption at differing   pumping condition. Additionally, the concrete flow can be manually adjusted. The pump operates in a proven open circuit.The maximum   placing output   and the pressure   are determined by the construction sites. Between these two values, automatic adjustment  by the governor occurs maintaining a  constant output depending on the  power available from the installed drive motor. Design The portable concrete pumps are assembled in the unit construction system.  The main assembly groups are Frame, Power unit, Concrete pump kit, Control block, Hydraulic tank and Hopper with agitator. The Frame & Axle  The frame, in compact execution, is constructed from standard vehicle profiles. The pump is mounted on heavy duty single axle chassis with draw bar, pneumatic tyres and for travelling on construction sites at up to 25 km/hr. Control System  The fully hydraulic control system is integrated within the drive. The compact control block and minimal hydraulic lines makes the equipment reliable and durable. The differential cylinder has trouble free piston rings and automatic constant stroke maintenance. Both gate valves change independently so that even when full change over is prevented by foreign material or similar obstructions  in the concrete, the pump continues to operate without problems. All components are especially developed and manufactured to withstand the rough treatment on construction sites.

• Power: Diesel & Electric
• I Deal In: New Only
• Usage/Application: Concrete
• Hopper Capacity: 600Liters
• Capacity: upto 90 cum
• Brand: Powerol
• Features: high quality, simply reliable and affordable.

• Weight: 400kg
• Capacity: 100kg
• Surface Treatment: Color Coated
• Material: Mild Steel
• Usage/Application: Concrete Pumping
• Features: Smooth reverse pumping, Low operational cost, Fuel efficient.

The motor (Diesel or Electric) drives the axial piston pump via a flexible coupling. Due to automatic output adjustment optimum utilization of the motor power, resulting in low energy consumption at differing   pumping condition. Additionally, the concrete flow can be manually adjusted. The pump operates in a proven open circuit.The maximum   placing output   and the pressure   are determined by the construction sites. Between these two values, automatic adjustment  by the governor occurs maintaining a  constant output depending on the  power available from the installed drive motor.The portable concrete pumps are assembled in the unit construction system.  The main assembly groups are Frame, Power unit, Concrete pump kit, Control block, Hydraulic tank and Hopper with agitator. The Frame & Axle  The frame, in compact execution, is constructed from standard vehicle profiles. The pump is mounted on heavy duty single axle chassis with draw bar, pneumatic tyres and for travelling on construction sites at up to 25 km/hr. Control System  The fully hydraulic control system is integrated within the drive. The compact control block and minimal hydraulic lines makes the equipment reliable and durable. The differential cylinder has trouble free piston rings and automatic constant stroke maintenance. Both gate valves change independently so that even when full change over is prevented by foreign material or similar obstructions  in the concrete, the pump continues to operate without problems. All components are especially developed and manufactured to withstand the rough treatment on construction sites. Control Housing Ideal flow conditions in the control housing resulting in superior placing proper ties also incase of concrete low on sand and fines, stiff consistence or crushed aggregates. Simple tilting of the output pipes enables easy control and cleaning of the concrete conveying path and the gate valve parts. Pumping Material Pumpable concrete, within any consistency range down to a water cement ratio of 0.4. Even concrete with aggregate grading up to 40mm can be conveyed  trouble  free with the concrete  pump through a 125mm diameter pipe line.   Flat gate valve The  two flat gate  valves working   independently  have  been especially developed for pumping concrete. Their working system with automatic adjustment permits trouble free pumping even with badly worn parts. Integrated Control Block  The hydraulic control system is integrated with in the drive. The compact  control  block  & minimal  hydraulic  lines makes  the equipment reliable & durable.

Trailer Mounted Concrete Pumps, Centrifuge Sludge Separator

Trailer Mounted Concrete Pumps, Forged Right Angle Clamp, sleeve clamp

concrete trailer pump, load bearing wall, precast column, Beams

trailer concrete pump, Concrete Separate Placing Boom

Concrete Trailer Pumps