Constant Voltage Transformer Dealers

Pro_tek range of Advanced CVT - CONSTANT VOLTAGE TRANSFORMER Series introduces Pro_tek CVT. These CVT are specially designed for their best performance to Indian power conditions. Available in Single Phase and Three Phase Transformers. Constant output against wide range of I/P Voltage 180 V- 280 V. Eliminates spikes, Notches, Noise & other transients. High degree of isolation between input & output. High correction rate : 2 cycle. No moving Parts. Low maintenance & long life. Very low distortion : max. 6% with Sinusoidal output wave form. Automatic Current limiting & short circuit protection. Electrostatic Shielding on units. For 1% change in frequency Output voltage variation is only 1.5% Aesthetically fine look,compact &sleek in look. 120% overload for 3 minutes. Cool in operation up to full load. Energy storage for line loss of 5 sec.

• Features: Compact design, Sturdily built, Long service life
• Power Unit: 500VA-2KVA

• Country of Origin: India
• Type: Constant Voltage Transformer
• Mounting Type: Pole Mounted
• Corrosion Resistance: Yes
• Operating Type: Automatic
• Secondary Voltage: 220 V
• Cooling Type: Air Cooled
• Material: Copper
• Shape: Rectangle
• Certification: ISO 9001:2008
• Color: Sliver
• Finishing: Coated
• Rated Voltage: 220 V
• Input Voltage: 170-270 V
• Output Voltage: 220 V
• Power: 10 KW
• Driven Type: Electric
• Standard: IS 2030
• Phase: Single Phase
• Warranty: 1 Year
• Packaging Type: Carton Box
• Overall Length: 15-20 Inch
• Usage: Electricity Distribution

We, Santron, are one of the most sought-after Elent Constant Voltage Transformer Suppliers in India. In an Elent Constant Voltage Transformer, the AC mains powers the input winding which is widely separated physically form the isolated output winding. The input winding normally runs at much moderated flux linkage levels. The output winding exhibits an intrinsic energy storage characteristic, and this energy storage characteristic and this energy storage operates in conjunction with mains capacitor to produce self-generated AC flux field which is indirectly excited from the input winding. Features No semiconductor or moving part used, hence very high reliabilityNo feedback control usedIntrinsic current limiting and short circuit protectionOutput voltage correction within ½ cycle (10 ms) from no load to full load for specified load and line variationShort term over load capacityEnergy storage for line loss up to 3 ms at typical loadHigher input voltage control range, for loads less than rated loadVery high line transient/spike rejection capability and excellent isolation characteristicsOutput floating (optional)

• Brand Name: HPCS
• Material: Copper
• Finishing: Polished
• Color: Sliver
• Power: 500 VA
• Cooling Type: Air Cooled
• Operating Type: Automatic
• Usage: Industrial
• Packaging Type: Carton Box
• Type: Constant Voltage Transformer
• Weight: 10 Kg
• Phase: Single Phase
• Warranty: 1 Year
• Country of Origin: India
• Secondary Voltage: 220 V
• Accuracy Class: 0.01
• Primary Voltage: 190V-250V
• Capacity: 500 VA
• Minimum Order Quantity: 1 Piece

• Country of Origin: India
• Type: Constant Voltage Transformer
• Mounting Type: Ground Mounted
• Corrosion Resistance: Yes
• Operating Type: Semi Automatic
• Secondary Voltage: 220 V
• Cooling Type: Air Cooled
• Material: Copper
• Shape: Rectangle
• Certification: CE Certified
• Finishing: Coated
• Power: 10 KW
• Driven Type: Electric
• Phase: Single Phase
• Warranty: 1 Year
• Packaging Type: Carton Box
• Speciality: Reliable
• Usage: Industrial

• Power: 4800 W
• Phase: Three Phase
• Output Voltage: 220V AC
• Display Type: Analog

We are an established Manufacturer and Supplier of Constant Voltage Transformers from Uttar Pradesh. The Constant Voltage Transformers we make available come in different specifications. In order to ensure that only defect-free Constant Voltage Transformers reach the buyers, we carry out strict quality-tests before the final dispatch. Bulk orders of the Voltage Transformers are processed as per the specific requirements of the buyers. The entire range of the Transformers is made available at nominal rates.

• Efficiency: 98%
• Protection: HIGH VOLTAGE , LOW VOLTAGE , SINGLE PHASE and MOTOR PROTECTION
• Input voltage of 1KVA - 150KVA SINGLE PHASE: 170 V - 270 V
• Input voltage of 3KVA - 1,500KVA THREE PHASE (AIR/OIL COOLED): 340 V - 470 V
• OUTPUT REGULATION: +/-1%
• RATE OF CORRECTION: 70 V / Sec Ph-Ph
• CONTROL: MICRO PROCESSOR
• DUTY CYCLE: CONTINUOUS
• COOLING: AIR / OIL COOLED

Excelon cvt consists of buck-bust transformer ,whose secondary is connected in series with the main input and the load. The primary is supplied by an auto-transformer driven by a servo-motor. The motor is driven by a solid state sensing and control which senses output voltage.

• Input Voltage: 180-260, at rated load. • Output Voltage: 220/230v+/-1%. • Frequency: 50 Hz+/-1%. • Response Time: 30 milliseconds. • Efficiency: 90%(app) under full load condition. • Output wave form: sinusoidal. • Load power factor: 0.75% lag to 0.9% lead.

In order to meet the ever-increasing demands of our clients, we are engaged in offering Constant Voltage Transformer. We adopt the cutting-edge technology and tools for fabricating it. It is widely demanded by various industries, all over the globe. It is easy to install and demands the least of maintenance cost. Its numerous attributes like corrosion resistance, seamless finish, optimal functionality, and faultless performance are highly admired by our patrons.   Detail : Avail from us superior quality range of Constant Voltage Transformers that is designed by our professionals using latest technological advancements. The offered transformer is physically separated from the isolated output winding. These are widely used to provide complete protection to computers and microprocessor based systems. Manufactured using premium quality raw material and cutting edge technology, these are tested on various parameters by our quality controllers in order to deliver flawless range at clients end. Available in various ratings ranging from 75 VA to 10.0 KVA, these can be availed in various customized options.   Features : Load bearing capacity Low power consumption Hassle free operation

Constant voltage transformer (CVT) manufactured and supplied by Servokon is the most preferred transformer over conventional stabilizers. This is due to the fact that the stabilizers have relays that are when switched leads to interruption in output voltage for a short time. This can cause damage to the electric equipments like computers and others. CVT ensures complete protection against spikes and also provide controlled output voltage. Servokon, a renowned manufacturer manufactures the CVT with ferrow resonant technology; placing its winding separately. We have a highly qualified team of professionals for ensuring that the transformer is manufactured at par with the standard norms and according to the specific requirements of the customers. The transformer have been widely demanded in Bio-med equipments, Fax, Telecom Equipment, Color photography lab, High Sensitive machines and many other industries.

Aseem-oorja is engaged in offering a wide range of constant voltage transformers. This is a most reliable product as it has no moving parts & electronic components. Working on magnetic saturation principle, its voltage correction is very fast and accurate.

SPECTRON CVTs are produced by using state-of-the-art Ferrow resonant technology. The product is highly economical & reliable. It gives you instantaneous voltage regulation no transient, no spikes, sinewave output, noiseless operation and high isolation between output & input. Recommended for Computers, Fax, Bio-medical Equipment, Telex, Telecom Equipment, Color Photography Lab etc.   FEATURES : Minimum Maintenance Instantaneous Short Circuit and Over-Load Protection No Semi Conductor or Moving Parts Used, Short Term Overload Capacity Excellent Spike, Surge Suppression Very Fast Correction Speed

A ENERGX CVT, the AC mains powers the input which is widely separated physically from the solated output winding. The input winding normally runs at very moderate Flux linkage levels. The output winding exhibits energy characteristic and this energy storage operates in conjunction with mains capacitor to produce self generated AC flux field which is indirectly excited from the winding. The result is instantaneous voltage regulation and spikes. Sine wave output. A perfect answer for every electronic equipment.

The Constant Voltage Transformer, supplied by us, provides stable AC voltage, by using Ferro resonant feature for instantaneous correction. These transformers are known for their excellent surge protection, high isolation, excellent load regulation and sine wave output.

SHORT CIRCUIT AND OVERLOAD OPTIONAL, INPUT & OUTPUT TERMINAL BLOCKS, 95% NON CONDENSATION, WHEEL MOUNTED (IF REQUIREMENT).

• Input Voltage: 180V-260V & 160V-260V 
• Output Voltage: 220/230/240 V [+1% ] Phase to Neutral
• Frequency: 50/60 Hz ± 5%
• Speciality: Short term overload Capacity, Instantaneous Short Circuit & Overload Protection, Surge Suppression & Spike Protection, No Semiconductor or Moving parts used
• Capacity: 100 VA to 10 KVA 
• Load Variation: Admitted from 0 to 100%
• Operating Temperature: -15°C to +50°C
• Response Time: 10-20 milliseconds

We make use of the finest grade raw material that reflects in the finished products. Also, we make sure that it is procured from the trusted places only. For us making delivery of consignments is easy, as we have a productive logistic network that enables to reach buyers within the promised time.

• Type: Constant Voltage Transformer
• Color: Available in Many Colors
• Frequency: 50hz
• Output Type: AC Single Phase, AC Three Phase
• Automatic Grade: Automatic
• Cooling System: Air Cooling, Oil Cooling
• Warrenty: 1year
• Production Power: 5-10kw, 10-15kw

These CVTs are manufactured by implementing Ferrow Resonant Technology. Unlike ordinary transformers where primary and secondary windings are wounded closely, the constant voltage transformers have windings that are wounded separately. These voltage transformers are ideal for computer applications. The CVTs are preferred over voltage stabilizers as the stabilizers have relays that are when switched cause the output voltage to be interrupted for a short time. This type of interruption or transient many not be good for computers. In comparison to voltage stabilizers, the CVTs ensure a clean, spike-free and controlled output voltage. Features : Ferrow Resonant Technology Magnetic transformer with special construction Provided with a capacitor connected across the secondary winding of the transformer A separate shunt path is provided between the two windings for setting up the field between coils Ensure a spike-free and controlled voltage output Instant voltage regulation Fast correction speed There is no Semi Conductor or moving part Noise proof operation Low maintenance cost Low maintenance Cost effective rates High functionality Application : Bio-med equipments Fax Telecom Equipment Color photography lab High Sensitive machines

• Brand Name: SERVOSINE,SERVOSINE
• Material: Copper
• Finishing: Coated
• Color: White
• Power: 500VA Upto 5KVA
• Cooling Type: Air Cooled
• Operating Type: Automatic
• Speciality: Easy To Use, Reliable
• Usage: Industrial, Commercial
• Packaging Type: Carton Box
• Mounting Type: Ground Mounted
• Type: Constant Voltage Transformer,Air Cooled
• Weight: 11KG Approx.
• Input Voltage: 180V-270V
• Output Voltage: 220V/230V
• Phase: Single Phase
• Warranty: 1 Year
• Country of Origin: India
• Secondary Voltage: 220 V

We make available, Constant Voltage Transformer, which is appreciated for providing adequate power for the critical load. It comes with features like overload protection, instantaneous correction, over voltage & under voltage protection, etc.

A Transformer is a device that can change AC voltage andor provide ISOLATION. A transformer that changes an AC voltage is called a step-down or step-up transformer depending on whether the output voltage is lower or higher than the input voltage. When a transformer steps-down voltage, it steps-up current in precisely the same ratio, thereby conserving the product of voltage and current, which is POWER. Transformers which have an electrical connection between the input and output voltages are called auto-transformers. Transformers with no power connection between input and output are called ISOLATION transformers.

Highly Recommended, Versatile, Dependable and Suitable For CNC Machines, Computers, Data Processing Machines, Telex Teleprinters, Fax Machines, Telephone Exchanges, Audio Video Sysyems, Electromechanical Equipments and Other Sophisticated Gadgets.Salient Features Highly Reliable Because no Electromechanical Moving Parts Are Used. Highly Isolatedoutput Free From Spikes Surges and Transients. Output Can be Provided Floating if Desired. No Waveform Distortion Included by The System. Fast Response Time, Output Regulated Within 10m Sec. Load Regulation Better Than 2% at Rated Value. Specifications Input Voltage Range - 175V – 280V Output Voltage - 220/230V  1% Phase - Single Type - Ferro Resonant Type Transformer  Efficiency - Better Than 90% Capacities Available - 100VA, 150VA, 200VA, 500VA, 1KVA, 2KVA, 3KVA, 4KVA & 5KVA Preventive Measures Not to be Used For  Frequency Variation Beyond 50HZ 1%. Note To be Used For Higher Inductive Loads. Switch Off The CVT When Not in Use Before Switching on The Equipment, Switch on The CVT Properly. Do Not Place Anything on TheTop of CVT.  All The Connectons Should Be Firmly Tightened. Neutral & Line (N&L) of The Mains Plug of CVT Should be Matched With Mains Supply. Sufficient Air Circulation Should be Maintained Near CVT For Better Cooling And Efficiency.

We are statured as the reliable manufacturer and supplier of Constant Voltage Transformers, which are known for their efficient performance in hardcore industrial applications. These Constant Voltage Transformers are useful for all kinds of medical and electronics appliances, having low inductive loads. Attributes :Hassle free operationsDurable and reliableHigh bearing capacityLow maintenance requiredAnti - corrosive Applications :Hospitality industryChemical industryHospitalsIndustrial industryElectrical industryElectronic industry