Control Motors Dealers

• Certification: ISO 9001:2008 Certified
• Color: White
• Number Of Way: 2way, 3way, 4way
• Type: Air Control Valve
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Pressure: High, Low
• Feature: Durable

Our air motors have a power range from 0,1 kW up to 23 kW. The air motors can be supplied in combination with a gearbox for higher torques and lower speeds. Custom built sollutions are possible due to our own design and production department. All standard motors are available from stock.

SPEED CONTROL OF INDUCTION MOTOR (VARYING VOLTAGE)     The set up has built in see through top coverin MS powder coated cabinet. The controlcircuitry is given upon the front panel andsockets are given to observe the motorvoltage and current waveforms. Since it is aline operated unit thus isolation is provided bysmall transformer at the observation points.This demonstration unit use the smallinduction motor 220V.

• Type: Low Voltage
• Certification: ISI Certified
• Tensile Strength: 0-25Mpa
• Phase: AC Single Phase, AC Three Phase
• Warranty: 1 Year
• Brand Name: ABB

These motors are designed exclusively for fre-quency converter supply, where they provide high speed accuracy even without speed sensors because they are synchronous motors without rotor slip with a range of100 — 850 r/min. The motors can simplify drive systems by effectively eliminating the need of speed reduction devices.

• Type: Automatic
• Certification: CE Certified
• Voltage: 220V
• Phase: Single Phase
• Warranty: 1 Year
• Speed: 2000-3000rpm
• Usage: Industrial
• Weight: 10-20kg
• Finishing: Polished
• Pressure: High Pressure
• Brand Name: Electra

• Color: Black
• Power Source: Electric
• Application: Inverter Use
• Voltage: 220V
• Phase: Single Phase
• Country of Origin: India
• Cerification: CE Certified

UTM with touch screen having Servo Control Motor & drive with interfacing facility with Windows based PC. Speed range 0.5mm / Min. to 500mm / min. Dual column table top / floor mounted up to 50 KN.

• Country of Origin: Pune
• Phase: Single
• Color: Black
• Brand Name: Swipfe
• Speed: 0.1 To 500 RPM
• Load Current: 0.35
• Frame Size: 90 mm

Continuous Rating, Wide Speed Range, Speed Variation Through Electronic Unit, Taco Generator for Feedback. Rotates in Clockwise or Counter Clockwise Direction. Terminal Box or Open Lead Wires for Connection.

We are offering an exclusive range of Stepper Motor Controller. The provided stepper motor controller is widely used to control the operations of stepper motor. This stepper motor controller is highly demanded among our clients for its less maintenance and long operational life.

• Country of Origin: India

STAFFA HMC080/S/65/30/FM3 HYDRAULIC MOTOR WITH CONTROL VALVE

• Brand Name: J D AUTOMATION
• Power: 90w
• Country of Origin: PUNE
• Application: CONTINOUS DUTY
• Output Type: 90W
• Input Voltage: 230VAC

For a compact and cost-effective geared motor solution, our Speed Control Geared Motor is the best choice. The company is an unsurpassed Manufacturer and Supplier of Speed Control Geared Motor from Pune, Maharashtra, India. These Speed Control Geared Motors are available in different specifications and power ratings. To cater the bulk requirements of the customers, we maintain a large stock of Speed Control Geared Motor in our state-of-the-art warehouses under optimum conditions.

• Phase: Single Phase
• Type: Rotary Servomotor
• Motor Brand: Yaskawa
• Resolution: 24 Bit High Resolution
• Downsizing: Upto 20%
• Flange Compatible: Sigma-5
• Range: 50 W - 7 kW
• Serial Encoder: 24 Bit Absolute
• Incremental: 24 Bit Incremental
• Voltage: 200V

• Type: Dc Motor
• Weight: 0.5kg
• Color: Black, Blue, Grey, Silver
• Voltage: 110V, 220V
• Power: 1-3kw, 3-6kw
• Driven Type: Electric

Speed Control Of Dc Motor is developed to control any speed of DC motor using 555 & Mosfet. A PWM circuit based on timer NE555 is the heart of this Speed Control Of Dc Motor. NE555 is wired as an astable multivibrator whose duty cycle can be adjusted by varying the POT VR1. The output of IC1 is coupled to the base of transistor Q1 which drives the motor according to the PWM signal available at its base. Higher the duty cycle the average voltage across motor will be high which results in higher motor speed and vice versa. The following project is a PWM motor control. It is very easy to be built and it can efficiently control all DCmotor to rpm as low as 450 rpm . It uses ONLY one 555 timer and a few other components, and it can be powered also directly from the PC power supply, from the 12 Volts line. DC Motor Speed Controller Circuit Using NE555 PWM switching will create a series of PWM pulses and will be driven directly to the gate of the MOSFET. The MOSFET is chosen to be big enough to carry enough loads, up to 9.2 amperes. You can choose a MOSFET according to your needs. The MOSFET will generate enough power so that the motor will start revolving. The capacitor across the MOSFET is the solution to the 'kicking sound'. The MOSFET will send to the motor pulses according to the pulses generated from the 555. If you remove the capacitor, you will definitely hear this annoying sound. The capacitor will smooth the voltage across the motor and therefore the power driven to it will be smooth, avoiding the torque kick.

• Power: 30-400W
• Type: High Voltage
• Brand: Oriental Motor
• Usage/Application: Industrial
• IP Rating: IP44-IP66
• No Of Phase: Single Phase

We Offer Speed Control Motors. Speed control motors are motors that can have their speed changed. These brushless motors provide both excellent speed stability and wide speed control range. AC speed control motors can control the speed of the AC motors using simple functions. An inverter can easily control and speed of the three-phase induction motor. There are three product groups. Brushless Motors --AC Power Supply Input --DC Power Supply Input --AC Speed Control Motors --Inverters Accessories --Cable, Speed indicator, etc.

• Field Voltage: 220 Volts D.C.

Control motors Highly efficient operational speed control, High reliability, with a complete protection system, Over-load trip feature.

• Features: Small Size for Compact Equipment Design, Less Noise is Generated from the Controller, Equipped with Alarm Output Function
• Brand: Oriental Motor
• Product Type: Induction Motor
• Frame Size: 60 mm
• Capacitance: 2.5 Mu F
•  :