Crompton Submersible Pumps Dealers

The Submersible Pump, supplied by us, has the maximum capacity up to 4500 LPM. The power capacity of these pumps is up to 28 HP and discharge of 390 LPM to 3990 LPM. These pumps are made in compliance with the set industrial standards.

• Brand Name: Crompton
• Country of Origin: Made in India
• Power: 0.75
• Number Of Stages: Single-stage Pump
• Model Name/Number: CCPM12(1PH)
• Motor Phase: Single Phase
• Warranty: 12 months
• Pump Size: 50 mm
• Power HP: 1HP
• No Of Stage: 1
• Pump Head: 6-16 m
• Suction/Discharge: 300-50 LPM

the construction of the pump is of pump below, and motor above type and suction inlet is at the bottom, so that water is pumped from the lowest level. The pump is driven by water filled submersible electric motor, squirrel cage induction type, water which acts as a lubricated against the contamination from surrounding water by mechanical seal. All parts are made from especially selected material to suit high abrasion and corrosion the pump can be installed in vertical pump easily shifted to alternative site for reinstallation and withdrawal of the unit as well as replacement of normal wearing parts on site with minimum labor.

• Application: High Voltage
• Brand Name: MILLBORN
• Motor Horse Power: 1 - 3 HP
• Application: Industrial
• Motor Phase: Three Phase
• Head: 15 to 50 m
• Maximum Discharge Flow: 100 - 500 LPM
• Discharge Outlet Size: 1 to 2 in
• Place of Origin: Gujarat, India

We are the leading manufacturers, exporters and supplier of this products.

The Submersible pumps, delivered by us, have rated frequency of 50Hz / 60Hz and power of 1 Hp. These pumps are largely appreciated for their maximum flow of 320m³/h.

• Size: 80 mm to 250 mm
• Size: 80 mm to 250 mm

Submersible Pump Pump Model-VS Application- Under Ground Water      FIELD OF APPLICATION :-   Irrigation   Drinking Water Supply installations for cities and rural districts.   Fully automatic domestic supply installations   Service water supply installations for industry and commerce   Air-conditioning installations   Fountains   Mining drainage   WET TYPE SUBMERSIBLE PUMP SPEEDS 2880 RPM :-   MOTOR :-         VENUS Submersible motor is a wet type, squirrel cage induction motor of 2880 R.P.M. suitable for 415 V/220V, 50Hz, 3/ single phase, A.C. supply. The windings are made of waterproof Polly/PVC. Insulated Copper wires. The motor shaft is guided by sleeve bearings of special lead bronze having extremely high wearing capacity. The axial thrust produced by the pump and Motor is taken care by means of single titling pad thrust bearing. The winding and bearing bushes are cooled and lubricated by pure water filled in the motor before erecting pump set. The motor is protected from well water sand and foreign materials by means of cable gland and rubber seal etc. The thrust bearing housing is provided with a drain plug for filling and draining water.     PUMP :-          The pump is multistage type of latest hydraulic design for maximum performance and operating efficiency. Impellers are dynamically balanced. The stainless steel shaft is lapped to close tolerances, guided by water lubricated rubber bearings, provided at in each bowl of impeller casingA strainer is provided at in to the suction casing. A stainless steel coupling is provided to couple the motor and pump. A non-return valve is provided just below the rising main. Hydrostatic test is conducted on each pump set 2 times the maximum discharge pressure.VENUS pump sets are manufactured and tested conforming to IS : 8034-1989, specification for submersible pump sets for clear, cold, fresh water. 

• Type: Borewell
• Number Of Stages: Multi Stage Pump
• Motor Horse Power: 0.5 HP TO 30 HP
• Application: AGRICULTURE/ DOMESTIC
• Type: Water Filled
• Motor Phase: Three Phase
• Power Source: AC Powered
• Warranty: 12 months
• Brand: CMC

We are trustworthy supplier of Submersible Pump, which is duly tested by our experts on different parameters of quality so that the perfect pump is delivered to the clients. The Submersible Pump is in high demand among the clients. Our Submersible Pump is procured from highly trustworthy vendors and marketed at economical price. Features : SafeSuperior qualitySecured packagingHigh performanceLong-lasting Applications : Sewage, Waste WaterRaw WaterCooling WaterSludge & GritStorm & Flood WaterIndustrial EffluentsConstruction SitesDrainage in Plants, Factories

We have a wide range of inexplicable quality submersible water pumps from 0.50HP to 50HP having ISI-8034 mark. Over the years, continuous improvements in grari technology have resulted in new products with expanded capabilities. An urge to have a better option to a long, unwidely extension shafting from a motor at the top, to the pump down in the deep, became the motivation for the development of deep well submersible pump. We have carved a niche as one of the submersible pumps exporters from India. These electric submersible pumps are manufactured from the optimum quality raw materials to ensure their reliability. Utilization of high technology machines in the manufacturing of these pumps enhances their durability. These electric submersible pumps consume low electricity and need no special maintenance. Their long lasting trouble free performance makes them highly popular among varied sectors. Pump Terminology GANGOTRI Submersible Pumps make with new EPLC technology. Pump A device or machine used to increase the energy level of a liquid. The term 'pump' applies to the machine itself, usually limited by its terminal points:inlet connection, outlet connection, drive shaft, and sometimes connections to seals. some pumps are integral with the driver and the driver may have terminal points. Pump Unit A pump, with power transmission and driver, mounted on a baseplate/skid/trailer. The 'unit' includes any mounted auxiliary equipment. Compressor A device or machine used to increase the energy level of gases or vapours. The world of pumps is huge and very broad. Without pumps, life as we know it would come to an end. Capacity All types / Capacities Ranging from 0.5 H.P. to 50 H.P. Inhouse Facility All modem machinery with modem tool room facility with testing laboratory. Quality Assurance All incoming goods are inspected under strict quality control by our qualified and experience Q.A. Staff and our suppliers are registered under our approval. In process stage inspection is carried out at workshop floor level, during machining assembling of pumps and motors. All finished goods Pumps are inspected as per requirements of customer and also BIS standards are followed (ISI:8034). All Pumps, are tested in the test lab and all technical data are observed on the control panel and recorded to ensure best results and performance. Packing V3-V4 Pumps are packed in corrugated Boxes and V.6 / V.8 and other pumps are packed in Wooden Boxes with their identification marking. Infrastructure Marketing & Sales. Qualified and experienced team Service after Sales. Qualified and experience team Finance & Accounts. C.A. and Accountants team. Service After Sales Prompt through service mechanic team monitored by Production Director. Advantages Easy installation. Compact & Economical. No pump house, foundation or long shaft Smooth Noiseless running. High operational reliability. High efficiency and low power cost Little or no maintenance. Can be used Horizontally also. Pumping system can be made fully automatically. Motor designed to withstand voltage fluctuation and can be operated at low voltage. Application Fully automatic domestic water supply. Construction sites. Agriculture Irrigation, Sprinkler & Drip Irrigation. Apartments, Societies, Tenements, Bungalows, Raw Houses & Industries. Ornamental Fountains. Mining Drainage. The Scope The company is engaged in the business of Design and Developments manufacturing and different types and capacities of submersible Pumps.

it is used in water lifting from rivers and canals, multistorey water supply, it is used for swimming pools and fountains , also for water supply in commercial establishments ,For ETP ,STP and WTP Purpose.

• Type: Submersible Pumps
• Certification: ISO 9001:2008
• Application: Agriculture, Domestic, Industrial
• Color: blue
• Voltage: 220V, 380V, 440V
• Fuel: Electric, Solar
• Theory: Axial Flow Pump, Centrifugal Pump
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Structure: Multistage Pump, Single Stage Pump
• Warrenty: 1 Year
• Country of Origin: India
• Brand Name: Challenger, CPIL
• Name: submersible pumpset

• Brand Name: Sewage Submersible Pump

We offer sewage submersible pump. We are instrumental in providing our clients a comprehensive range sewage submersible pump. Backed by a team of experts, these pumps are manufactured using high grade raw material and advance technology by our skilled professionals. Our offered range is precision-designed, in order to meet the international standards. Furthermore, these pumps are availed in various sizes and other related specifications, as per the varied needs of our valuable clients. Our range is stringently tested on various parameters to assure it on counts of quality. features: strong construction rust proof easy to install non clog sewage submersible pumps are closed coupled compact design having a pump below the motor by which maximum liquid pumping is possible. Squirrel cage induction drywet motors suitable for operation at 230 volts 1 phase & 415 v 3 phase, 50 hz, ac supply a precision manufactured motor is achieved utilizing a laminated sheet steel production process combined with the highest standard of quality control. The drive shaft and rotor assembly is heat treated and the stator and wiring impregnated with varnished. This ensures 100% quality manufactured motor with stable characteristics and a high efficiency. the bearing arrangements with double angular contact ball bearing with deep groove ball bearing give the best resistance to the radial and thrust load combination in a centrifugal pump. The bearings are enclosed with high temperature grease containing special anti-corrosion additive. non-clogging impeller design with the high efficiency, excellent performance and big passing of solid provide the best solution for drainage of effluent water. Below the motor impeller runs in a volute casing and the impellers are of sturdy construction and can be supplied in wear resistance material if the sewage contains hard solids. All sb sewage pumps have a standards equipment double mechanical seal or silicon carbide which prevents motor from liquid being pumped.

We are identified as one of eminent Submersible Pump Manufacturers and Suppliers in India. Our range of Submersible Pumps is accurately designed to meet the needs of various industries like Construction, Chemical, and Steel Industries. We provide Submersible Pumps to the clients in assorted sizes and thickness that too at affordable rates. Features : Robust constructionTrouble free installationEfficient performanceHighly Durable Specifications : V4, V5, V6, V7 and V81 HP to 3 HP and 6 HP TO 50 HPWater filled and Oil Filled

• Application: Agricultural, Industrial etc.
• Power Source: Electrical
• Type: Underwater, Wet Ground
• Pressure: Low Pressure, High Pressure, Medium Pressure
• Pump Type: Submersible
• Quality: Excellent

We have automated warehousing system to keep pace with the latest trends and to meet the clients' requirements. Our professionals make certain that the products are kept safely. Catering to the requirements of the customers; we are a renowned Supplier of Submersible Pumps.

We are the leading manufacturers, exporters and supplier of this products.