Cross Flow Cooling Tower Dealers

• Certification: CE Certified
• Application: Air Cooling
• Weight: 0-100kg
• Voltage: 110V
• Condition: New
• Brand Name: JE
• Frame: The supporting structures are of hot-dip galvanized steel, used to reduce corrosion or rusting, thus ensuring extended life

The Rectangular Cooling Towers or the closed type Cooling Towers or the cross flow Cooling Towers has a range of cooling capacity of a single cell Cooling Tower of around 70M3/Hr to 300 M3/Hr. The suitable refrigeration is between 4째 C and 30째C. Multiple cells may be fixed together. This installation plants are available when your cooling requirements exceed The motors in this Cooling Tower system are present outside the tower. This setup is devoid of the problem of hot mist. When compared to the section of motor inside fan, it is very easy to remove and thus repair.   CasingThe casing of this industrial Cooling Tower is made of FRP (Fiberglass Reinforced Plastic). It is of light weight, simple to assemble and there is no need to paint. This reduces the cost of the Cooling Tower maintenance.Advantages Lower maintenance and longer service life. Available with PVC fills or treated wood fills In virtually unlimited capacity He furnishing of the inspection doors of the tower are done in such a way to provide easy access to the inside for maintenance, inspection, float valve adjustment, sump flushing out and lift-out strainer cleaning. FRP fan specially designed for higher efficiency.

Casing And Basin:- The Gelcoated Shell  And Basin Of Cooling Tower  Is Robust But It Is Light Weight Made By Engineering Polymer  Grp  [Glass Fibre Reinforced Polymer].We Are Using Premium Raw Goods To Makes Structural Strength And Withstand Capacity.It Is Repairable  By Skilled Person   Supporting Structures:- All Supporting Structures Made By Mild Steel Angles ,Flats And Round  Best Available In Market .It Is Treated With Hot Dip Galvanizing /Epoxy Coated After Fabrication Work Done. Treatment Gives Long Life And Protection From Rust And Scale Formation.   Electrical Fan Motor:- Elctrical Fan  Motor Is Specially Designed For Cooling Tower Application .It Has Low Rpm ,Long Shaft Fitment  And Vertical Mounted For Better Airlow ,Reducing Vibration And Low Noise Polution.Tesc [Total Enclosed Surface Cooled]Insulated Ip-55 Grade With Weather Proof Design Sustain In Bad Weather .   Adjustable Pitched Axial Flow Fan:- Axial Flow Fan Throw Maximum Air At Low Rpm Motor To Give Better Cooling Performance .Direct Driven Fan Eliminates Gear Reducer Drives Or ‘V’belt Arrangement  For Regular Maintenance And Sudden Breakdown .It Is Also Less Vibration And Noise Pollution.Fan Available In Aluminum,Frp,And Engineering Polymer   Water Distribution Systems:-There Is No Requirement For Water Pressure Just  Simply Pour Water On Upper Side Mounted Water Trough And Flower Type Nozzles Splash Water Each Space Of Fills Packing .   ‘V’ Bar Type Fills Packings:- ‘V’bar Diamond Punch Type Fills Resist In Scale And  Atmsospheric Polution Formation And Constantly Performed Cooling Efficiency .’V’ Bar Mounted With Stainless Steel/Hotdipped Galvanised M.S.Steel/Frp Gridd   Canopy:- Specially Designed Canopy Protect Electrical Motor From Rain And Sunrays And Give More Life .   Z’ Type Eleminator:- Z’ Type Pvc Eleminator Reduce Water Droplet From Air And Saves Water As Precious Need For Life. Out Side Z’ Type Louver Arrangement:- Louvers Arrangement Reducing Water Spill Out From Cooling Tower  Saves Water And Cleanness Near Cooling Tower

We have carved a niche as a prominent Manufacturer, Exporter and Supplier of Cross Flow Cooling Towers in Gujarat, India. We have tie-ups with the leading firms, thus the best in line raw material is used for manufacturing Cross Flow Cooling Towers. Our Cross Flow Cooling Towers can be procured in tailor-made specifications, at the modest prices.

FIRST TIME IN INDIA, 'VARUN' has introduced and designed theCROSS FLOW TYPE MAINTENANCE FREE FRP COOLING TOWER™ with fit and forget technology. A proven & worldwide technology has made 'VARUN' as a global leader in design and supply of next generation cooling towers, which has consistent & high effciency in any water quality & vigorous conditions.

• Type: Cross Flow Cooling Tower
• Material: FRP
• Certification: ISO 9001:2008
• Application: Air Cooling
• Color: Blue, Grey
• Voltage: 220V
• Condition: New
• Capacity: 1000 TR -1500 TR
• Power: 1-3kw
• Warranty: 1year
• Country of Origin: India
• Size: 1000 TR -1500 TR
• Brand Name: World Cooling Towers
• After-Sales Service Provided: Yes
• Cooling Type: Perpendicular, Crossflow Cooling

• Type: Cross Flow Cooling Tower
• Material: FRP
• Application: Air Cooling
• Color: Grey
• Driven Type: Electric
• Package: 150 TR to 800 TR

Cross flow design Single cell and multi cell Pultruded FRP Structure Custom made option available  

• Material: Pultruded And Hand-Rail Frp
• Type: Cross Flow
• Capacity: 2,000,000-20,000,000 Kcal/Hr Per Cell
• Fabrication: Field-Assembled
• Air Flow: Cross Type
• Water Flow: 400 - 4,000 M3/Hr Per Cell
• Industries: Oil And Gas, Pharmaceutical, Power Plants, Refineries, Large-Scale Hvacsystems.

Induced-Draft Cooling Towers Made Of Frp. The Structure Of Our Pul. Frp Series (support Beams And Columns) Is Made Of Composite Continuous Fiberglass Pultruded Sections That Comply With Cti Std 137 And Conform To Astm E84d With A Flame Spread Rating Of Below 25. Pultruded Frp Cooling Towers Are Positioned Over A Concrete Basin. Just As Our Sgct SeriesCrossflow Towers : Low Pumping Head, Thus Lower Operational Cost. Accepts Variations In Water Flow Without Changing The Distribution System. Easy Maintenance Access To Vital Parts. Reduced Drift Loss Due To The Absence Of Water Droplets. Lower In Noise Due To Absence Of Water Noise. Larger Foot Print Of The Tower. Large Air Inlet Surface Makes Icing Difficult To Control. Tendency Of Uneven Air Distribution Through The Infill Due To The Large Inlet Surface. Customise & Tailor Made Counter Or Cross FlowCustomize & Tailor Made Tower Is Design Were We Have Less Space To Design Counter Or Cross Cooling Tower & We Are Specialized To Design For The Same : Space Availability Constrains Cooling Tower Fit In Existing Basin High Wind Velocity & High Seismic Zone Low Noise Level. To Suit Optimum Operating Economy. Features : Pultruded Fiberglass Polyester Field-Erected Cooling Towers Heavy-Duty Cooling Towers Designed For Industrial Applications Optimal Thermal Performance Design Highly Resistant To Corrosive Environments

• Country of Origin: India
• Material: FRP
• Certification: CE Certified, ISO 9001:2008
• Weight: 0-100kg
• Voltage: 220V
• Condition: New
• Capacity: 10 TR to 1200 Tr
• Power: 1-3kw, 3-6kw, 6-9kw
• Driven Type: Electric
• Warranty: 1year
• Brand Name: Active

• Type: Induced Draft Type, Forced Draft Type
• Features: Durable body structure, Precisely engineered, Withstand adverse conditions .
• Tower Material: FRP

Our specialization lies in designing Cross Flow Cooling Tower. We are renowned Cross Flow Cooling Tower Manufacturer and Supplier in Kolkata, West Bengal. The technologically advanced Cross Flow Cooling Tower offered by us is quite compatible for cooling high temperature. Assembled using superior materials and components, our Cross Flow Cooling Towers are sturdy in design, compact in size and can withstand corrosion and chemicals. The Cross Flow Cooling Towers are available in different specifications. Why Our Cross Flow Cooling Tower? Easy installationSafe to useEnergy efficientLeast maintenance

• Type: Cross Flow Cooling Tower
• Material: Wooden
• Certification: CE Certified
• Application: Air Cooling
• Weight: Other
• Color: Other
• Voltage: 220V
• Condition: New
• Capacity: 1000-1500L
• Automatic Grade: Manual
• Power: Other
• Driven Type: Mechanical
• Warranty: 1year
• Temperature: 50-100℃
• Gauge Thickness: Other
• Country of Origin: India

The tower casing has been manufactured form fiberglass reinforced plastic (FRP) which is highly corrosion resistance to give sufficient structural strength, to with stand high wind velocity and vibration and so its called FRP Cooling Tower.. Casing is fabricated in segments duly matched at works and aerodynamic contours are achieved for best fan performance.

• Country of Origin: India
• Weight: 0-100kg
• Condition: New
• Power: 1-3kw
• Driven Type: Electric
• Temperature: 0-50℃
• Gauge Thickness: 0-5mm
• Capacity: From 10 to 1300 Cubic Meters Flow/hr

We are offering cross flow cooling tower capacity 40tr to 400tr >>ideal for cooling efficiency and space economy >>very low water consumption due to negligible drift losses >>light weight, corrosion proof and long - lasting >>low maintenance & operating cost.

• Type: Cross Flow Cooling Tower
• Material: FRP
• Application: Air Cooling
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Electric

Cross Flow Type Cooling Tower is available in single Cell Cooling Capacity from 100 TR to 2000 TR. Our range of Cross Flow Type Cooling Tower including SFID (Single Flow Induced Draft) and DFID (Double Flow Induced Draft) Cooling Towers. In Cross Flow Type Cooling Tower the water flows vertically through the fills while the air flows horizontally across the flow of the falling water. Because of this, air does not have to pass through the distribution system, permitting the use of gravity flow hot water distribution basins mounted at the top of the unit above the fills. Key Benefits Lower Operating Costs : Adjustable pitch fans with true airfoil blades and 96% efficient Gear Reducer drive assure maximum utilization of applied fan power. Fully optimized fill configurations and low pressure-drop drift eliminators afford maximum cooling with minimum power input. Gravity flow water distribution minimizes pump power requirements. Lower Maintenance Costs : Heavy-duty aluminum alloy fans, cast-iron Geareducers, and stainless steel driveshafts require only periodic maintenance. Widespaced splash-fill helps prevent clogging. The fill area is readily accessible for cleaning. 2-year Driving System Warranty : JCSPL guarantee your tower's mechanical equipment for two full years. You'll save valuable equipment maintenance amount. One Destination for All Parts : All tower components except the electric motors are designed, manufactured, guaranteed, and stocked by JCSPL. You always know who to call for any parts you need. You're also assured that all components of the cooling tower will work together, because they are designed to work together. Major Components : Construction : The structural framework of the tower are Douglas Fir, designed in accordance with CTI STD-114. Shear plates are utilized to transmit loads at critical joints, and all fasteners shall be in accordance with CTI STD-119. Basic design criteria shall be 30 psf wind load and 5% G seismic load. Structural columns shall be 3"x4", except for louver support columns which shall be 3"x6". Diagonals shall be 3"x4" and 4"x4" lumber. Framing girts may be 2"x4", except for those supporting the hot water basins and fill. Those girts shall be 2"x6" minimum. Column Lines are kept on min. 4'-0" longitudinal centers, and the base of all perimeter columns shall be firmly anchored to galvanized steel base plates. Fan Deck & Fan Cylinder : The fan deck shall acts as a working platform for maintenance, Hence fabricated of Min. 1" thick, 7 ply, exterior grade, treated Douglas Fir plywood, and is designed for a uniform live load of 40 psf or a concentrated load of 400 pounds. Fan cylinders are made of molded FRP. They are anchored to the fan deck structure to provide a consistently stable operating shroud for the fan. Fan cylinders less than 72" in height are equipped with a removable, hot dip galvanized steel fan guard for the protection of operating personnel. Mechanical Equipments : Provided Fan(s) are propeller-type, incorporating heavy duty blades of FRP, with individually adjustable Blades. Fan(s) are driven through a right-angle, industrial-duty, oil-lubricated, geared speed reducer that requires no oil changes for the first three (3) years of operation. Motors are located outside the fan cylinder at the fan deck, connected to the speed reducer by a tubular stainless steel, dynamically balanced driveshaft equipped with neoprene flexible coupling elements. A galvanized oil gauge and drain line are provided from the gear reducer to the vicinity of the motor, and are equipped with a dip stick for oil level measurement.

• Country of Origin: India
• Type: Timber Cross Flow Cooling Tower, Cross Flow
• Condition: New
• Frequency: 50Hz, 60Hz
• Warranty: 1yr
• Fabrication: Field-Assembled
• Air Flow: Cross Type
• Water Flow: 400 - 440
• Industries: Refineries, Large-Scale Hvacsystems.
• Capacities: 10TR to 1500TR

• Country of Origin: India
• Application: Air Conditioning
• Condition: New
• Shape: Rectangular
• Type of Cooling Tower: Induced Draft Cooling Tower
• Cooling Capacity (Ton of Refrigeration): More than 100 TR
• Application: Industrial

• Country of Origin: India
• Type: Timber Cross Flow Cooling Tower
• Application: INDUSTRIAL
• Color: Grey
• Condition: New
• Blade Material: Aluminium
• Warranty: 1yr
• TEMPERATURE: 30-85 DEGREE CELSCIUS

Timber cross flow cooling towers are a type of cooling tower that uses a wooden framework and cladding to support the tower structure. Here are some typical specifications for timber cross flow cooling towers:   Capacity: Timber cross flow cooling towers typically have a capacity ranging from 10 to 5000 GPM (gallons per minute), depending on the specific application.   Framework: The framework of a timber cross flow cooling tower is typically made of treated wood, such as redwood, cedar, or Douglas fir. The wood must be treated to prevent decay and insect damage.   Cladding: The cladding of a timber cross flow cooling tower is also typically made of treated wood, and it serves to protect the tower structure from the elements. The cladding can be customized to meet specific aesthetic or functional requirements.   Fill: The fill material used in timber cross flow cooling towers is typically made of PVC or wood slats. The fill is responsible for increasing the surface area of the tower, promoting contact between the water and air, and facilitating the heat transfer process.   Fans: Timber cross flow cooling towers use axial flow fans to move air through the tower. The fans can be belt-driven or direct-driven, depending on the specific application.   Drift Eliminators: Drift eliminators are used to reduce the amount of water droplets that escape from the cooling tower. Timber cross flow cooling towers typically use PVC or wood drift eliminators.   Water Distribution System: The water distribution system of a timber cross flow cooling tower includes a spray system that distributes the water evenly over the fill material. The distribution system may include nozzles or spray bars, depending on the specific application.   Sump: The sump of a timber cross flow cooling tower collects the cooled water and directs it back to the heat exchanger. The sump must be designed to prevent the accumulation of debris and sediment.   Overall, timber cross flow cooling towers offer several advantages, including low cost, low maintenance, and easy customization. However, they require regular inspection and maintenance to prevent decay and ensure optimal performance.

We are offering wooden cross flow cooling tower paltech wooden cooling towers are designed for the highest efficiency at the lowest operating cost with main structural components of selected preservative timber. It is designed for operational load and wind pressure of l50 kgf/cm2 of projected area in any horizontal direction. Structural timbers are made out of pine wood after properly seasoned and chemically treated to withstand its life against biting, fungus and termite etc. Paltech offers wooden cooling towers with the capacity ranges from 500m3/hr to 3000 m3/hr per cell and upto any capacity in multi cell. Pine wood used to construct wooden cooling tower. Wood used is treated with preservative acid copper chromate. Structure, fan deck, stair ways etc are of treated wood.

• Application: Industrial
• Brand Name: M K Cooling Towers Pvt. Ltd.
• Supply Phase: Three Phase
• Tower Type: Induced Draft
• Tower Design: Cross Flow
•  :