Crush Tester Dealers

We are a renowned Manufacturer and Supplier of Ring Crush Tester. The Ring Crush Tester is used to determine the compression strength of a material. With the help of various accessories, the instrument can be used for measuring the compression strength of liner & fluting as well as of corrugated board. The Ring Crush Tester is easy to use. A test piece is placed at the center of the lower platen. When the operators pushes the start button, the lower platen moves upwards according to a preset speed until the test piece is crushed between the upper & lower platens. When this cycle is completed, the lower platen automatically returns to its home position. The maximum measured force exerted during the test is automatically presented on the built in display & value is hold until next Test Start.   Details Model : SGT-G030 You can test from The Ring Crush Tester as RCT, FCT, ECT, CLT, CCT, etc.

• Country of Origin: India
• Grade: Crust tester
• Display Type: Digital
• Voltage: 220 V
• Frequency: 50 Hz
• Material: Mild Steel

• Capacity: 100 Kgf or 250 Kgf
• Least Count: 0.01 Kgf
• Accuracy: ±2% at Full Load (with master load)
• Speed: 12.5±2.5mm/min
• Power Requirement: AC 220V, 50Hz, single phase
• Standard: IS 7063 – 2

MYQ Edge Crush tester – Digital (ECT) is rugged enough for any production testing environment. It is the idealtesting equipment for paper making, packaging, quality inspection department and more. ECT tester – Digital (ECT) is a useful equipment for determining the probable compression strength of corrugated and solid fiber board boxes by testing the paper and paper-board used in making such boxes.   Edge Crush Tester / Ring Crush Tester / Flat Crush Tester is used for accurate testing of paper, paper-board, solid fiber-board & corrugated board for ECT test and its components. The Edge Crush tester can also be used for performing compression test on all small packages.   The higher ECT value determined by the ECT tester depicts the rigidity of the CFB box. Hence, it may be used to compare the quality of the CFB board. It is also possible to determine the compression strength of the box (CFB) by using ECT tester with McKee’s formula i.e .Compression strength = k. ECT x T x Z Where, K= Constant ECT = edge crush test value T=Thickness of CFB board (wall thickness) Z= Perimeter of the box i.e. (2 L + 2 W)

• Type: Crushing Testing
• Feature: Easy To Use
• Condition: New
• Power Source: Electric
• Material: Metal
• Warranty: 1 Year
• Surface Finishing: Polished
• Resistivity: Rust Resistant

• Type: Crushing Testing
• Certification: ISO 9001:2008 Certified, CE CERTIFIED
• Color: Silver
• Feature: Easy To Use, Proper Working, Superior Finish
• Condition: New
• Power Source: Electric
• Warrenty: 1year
• Country of Origin: India
• Brand Name: UEC
• Power: 220V
• Brand Name: UEC
• Surface Finishing: Polished
• Resistivity: Rust Resistant
• Material: Metal
• Drive Type: Electric

• Type: Crushing Testing
• Feature: Four Times Stronger, Proper Working
• Frequency: 45Hz
• Automatic Grade: Automatic
• Power Source: Electric
• Warranty: 2 Year

To Crush the Extinguisher (DT =D/3) at perpendicularly to longitudinal axis & at midpoint,and then check for the cracks or leaks by filling water and pressurizing to test pressure.   Specification :   Standard : IS 15683:2006 Clause No. : 9.2.3 Operating Range : Extinguishers up to 12 kg. Dimension ( L x W x H ) : approx. 800 x 400 x 2000 mm Weight: approx. 120 kg Model No : SSEPL/TE 15683 / CR / 02

• Certification: ISI Certified, ISO 9001:2008 Certified
• Color: Blue and Grey
• Feature: Easy To Use, Proper Working, Superior Finish
• Condition: New
• Warrenty: Lifetime Buyback Warranty
• Country of Origin: India
• Brand Name: Paramount

Paramount Edge Crush Tester i9™ is an ergonomically designed Equipment with sturdy mechanism to get Accurate & Reliable Results. It is used for performing three different tests : Edge crush test, Ring crush test and Flat crush test to determine the actual and accurate strength of the packaging materials. Edge crush tester is provided with three different testing fixtures that allow the user to perform three different type of crushing tests on the test specimen. The instrument ensures accurate analysis of the crushing strength of the packaging materials and ensures stronger and better-quality packaging containers.

Cone Crush Tester is a high-quality and reliable testing instrument which is used for evaluating the crushing strength of cones composed of cardboard, paper tubes, bobbins and other types of core packing material. The functioning of the machine is dependent on the principle of radial crush test method. Unlike other testing machines, this equipment is constructed in a way that the force generated is put to 66% of the testing sample surface. The machine delivers such a precision degree that even a minute collapsing load can be easily recorded and saved. The accuracy in the inspection is obtained with a Load cell and Microprocessor based digital indicator which is installed with the machine.   FEATURES     The microprocessor-based display is equipped for accurate test data recording The crush/compression strength of test specimen can be seen live on display. Highly accurate and uniform compression force testing Strong gripping clamps for holding the specimen Inbuilt calibration facility installed in the machine Feather touch controls for easy and smooth operations  

• Country of Origin: India
• Color: Grey, Sky Blue, White
• Feature: Four Times Stronger, Proper Working
• Frequency: 45Hz, 66Hz
• Automatic Grade: Semi Automatic
• Power Source: Electric

Top-load and crush resistance testing reduces the risk of containers deforming or failing when subject to forces during filling, closure, storage and transport. Mecmesin top-load testers provide a reliable and accurate solution for meeting design standards in the laboratory and on the production floor. Our PC-controlled and touch screen test stands range from single-column machines (ideal for testing plastic bottles, aluminium and steel cans) to twin-column machines designed for testing large cardboard boxes and plastic or metal drums.Types of test top-load (column) crush box crush (BCT) edge crush (ECT) ring crush (RCT) top load, glass containers Benefits Aside from the benefits of minimised packaging failure, Mecmesin top-load testers offer: Cost-effectiveness A range of tough motorised models A choice of manual, touch screen or PC-based control A wide range of accessories Versatility for multiple applications Simple operation suitable for unskilled staff Intuitive software means minimal training required Free height of container can be calculated saving time High accuracy and repeatability Increased throughput from single or batch mode Automatic platen repositioning for quick sample insertion Ability to output results to multiple formats for use with SPC and data analysis software Expert after sales service

Stay confident for the delivery schedules with us as we are recognized for making on-time deliveries. Stringent quality checks have been employed upon the raw materials which we source. For this, we have hired special quality analysts who check the materials against different parameters.   Features: High-Performance Sturdy Structure Long Service Life

A crush test detects poor adhesive penetration, spotty adhesion and carton board with low bond strength. The bonding strength of glue of selected liners flutings of a corrugated board are determined by using the PAT test. Sturdy design of the instrument ensures that the parallelism of the plates is maintained for accurate results.

We provide a diverse range of Digital Crush Tester for various crushing & compressive tests. The machine comes with a preset distance sensor and preset load value that helps to check the load bear ability value of Lami pouches & other materials to bear up to 300 KGs. A timer is provided to preset the determined time for which the samples should be held, pressurized and compressed. When the test is carried out a digital indicator with atopic facility registers & holds the pic value generated during the test. We are the leading Manufacturers and Suppliers of this Digital Crush Tester. Features Easy to operateInnovative designingRobust constructionLong working life

NAUGRALABS LABORATORY PRODUCT NAME: CRUSH TESTER FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-320013 Description and Specification for Lab Tenders Crush Tester For Testing Lab Workshop.  Crush Tester - The  Crush Strength Tester is designed to test Concora Medium Test - Buckling Strength, longitudinal in fluting and Flat Crush Test & Edge Crush Test in corrugated fiberboard. It can also be used for testing Corrugated Crush Test, Ring Crush Test and Pin Adhesion Test with the help of additional accessories, which are available on specific demand. The equipment consists of two flat platens; one of which is fixed and the other can be moved towards or away from it with the help of a screw arrangement driven through motor and reduction gearbox at a constant speed. The load exerted on the specimen held between platens is measured on a digital load indicator through strain gauge type load cell. The load indicator is equipped to indicate maximum load attained during test and it also control the motor to stop the movement when the load applied attains the maximum capacity of the load cell.  Paper Testing Lab equipment manufacturers,exporters and Paper Testing Lab suppliers

DIGITAL MODEL: This instrument is used for testing the core collapsing strength and has adjustable testing area to accommodate specimen sizes and shapes. Motorized operated piston to apply uniform pressure to crush the test sample. The maximum peak crush value recorded on digital load indicator. 

• Brand Name: MCSPARR
• Capacity: 300Kgf
• Power: 220 Volts

Technical specifications load cell capacity 300 kgf load cell sensitivity +- 0.2% full scale motor power 12 hp 1440 rpm digital lcd display micro control 0 to 300 platen size 100 mm dia admit between platen 20 - 75 mm loading speed 10 +- 2.0 mm per minute power requirement 220 volts single phase dimensions in mm (lxwxh) 525x575x762 weight in kg 140.

Useful for determining Edge Crush, Flat Crush, Pin (Ply) Adhesion of Corrugated Board and Ring Crush and CMT of Paper and Paperboards.

• Phase: Single Phase
• Brand: K D Labs
• Features: Better display ,Precise result , High operational fluency
• Item Code: KDLI-B-293
• Accuracy: 0.5%
• Speed: 12.5 mm/min
• Display Type: Digital
• Body Material: MS
• Voltage: 220 V
• Power Source: Electric

Description :- An impact test or crash test is a type of destructive testing commonly performed to assure safe design standards for automobiles or related components. An impact tester or crash tester is an equipment, which is used to evaluate the aftermath of loose cargo impacts during motor vehicle collisions, and the energy absorption properties of rubber materials. Applications:Impact tester are widely used in the many fields. Some of its common applications are: Automobile Industry Plastic Industry Metal Industry

• Load Cell Capacity: 500 kgf
• Load Cell Sensitivity: ± 0.2% Full Scale
• Load Indicator Resolution: 0.1% F.S.
• Load Indicator Accuracy: ± 0.4% F.S.
• Platen Size: 100 mm dia
• Admit between Platen: 20-75 mm
• Loading Speed: 10±2.0 mm per minute
• Power Requirement: 0.5 kW Single Phase 220 Volts
• Dimensions in mm (L x W x H): 550 x 620 x 840
• Weight in kg: 80 (approx.)

Presto Edge Crush tester – Digital (ECT) is rugged enough for any production testing environment. It is the ideal testing equipment for paper making, packaging, quality inspection department and more. ECT tester – Digital (ECT) is a useful equipment for determining the probable compression strength of corrugated and solid fiber board boxes by testing the paper and paper-board used in making such boxes. Edge Crush Tester Ring Crush Tester Flat Crush Tester is used for accurate testing of paper, paper-board, solid fiber-board & corrugated board for ECT test and its components. The Edge Crush tester can also be used for performing compression test on all small packages. The higher ECT value determined by the ECT tester depicts the rigidity of the CFB box. Hence, it may be used to compare the quality of the CFB board. It is also possible to determine the compression strength of the box (CFB) by using ECT tester with McKee’s formula i.e.Compression strength = k. ECT x T x ZWhere, K= Constant