Crystallization Based Waterproofing System Dealers

• Country of Origin: India
• Type: Water Channel
• Color: Gray
• Feature: Fine Finished, High Quality
• Finishing: Polished
• Thickness: 2-5mm

Geotextile is permeable flexible membrane a fabric like continues sheet of woven / non woven.We are leading manufacturers of PVC Waterstop and are supplying our product to Govt-semiGovt, Infrastructure projects, Power plant, Refineries, Fertilizer plant, Civil contractors and other agencies. Our product is approved by SSNL, IGNP, NTPC, EIL and other consultant of repute.PVC WATERSTOPS Our present range of manufacturing, (RIBBED Type, DUMBBELL Type and KIKER Type ) 150 mm wide X 4-5 mm thick, 150 mm wide X 6 mm thick, 150 mm wide X 8-11 mm thick 225 mm wide X 4-5 mm thick, 225 mm wide X 6 mm thick, 225 mm wide X 8-11 mm thick 305 mm wide X 9-12 mm thick. JOINTING OF PVC WATERSTOPSWATERSTOPS can be welded with a thermostatically controlled heating or blade welder which is able to adjust the heat up to 250°C for melting the PVC WATERSTOPS as following procedure: Cut Water stops ends straight and true using sharp knife or carbide tipped saw blade. Clean and lightly rough up the WATERSTOPS using wire brush. Preheat the blade welder to 250°C then apply on the cut surface of each end. Allow the PVC WATERSTOPS melt down about 4-5 mm. along each cut surface.Take off the blade welder from the cut surface and hand press neatly each cut surface of WATERSTOPS together. Then check whether the splice was done properly or not by observing no hole, no distortion and, homogeneous. When the splice cooled, observe it carefully again to make sure proper splice, then the spliced WATERSTOPS are ready are ready to be installed. All center bulb waterstop must be aligned.   Major Applications For PVC Waterstops: Cooling Towers , CWS System Dams, canals, water reservoirs and aqueducts Tunnels and culverts Foundations Primary and secondary containment structures Water and waste water treatment facilities

We believe in transparency when it comes to payment of advance or full cost. We provide our patrons with numerous payment options for their convenience and ensure the methods are safe. We are staffed with a team of deft professionals who diligently furnish varied requirements of the clients and ensure qualitative packaging of the placed orders.

• Type: Water Stopper, Dumbbells
• Material: Plastic, Pvc
• Thickness: 4-6mm, 6-8mm, 8-10mm
• Country of Origin: India

Selection of appropriate PVC water stopper Ribbed Type – It has a multi-purpose water stopper design to be used for the expected differential settlement of poured concrete and a firm concrete grip desired.   Dumbbell Type – With greater variation in temperature, expansion and contraction of joints happen. Dumbbell type water stoppers are the suggested ones for these cases.   Kicker (Surface Type) – Where the embedded types cannot be used owing to interference of steel reinforcement, these are placed externally. Installation procedure: During installation, using small wires, the water stoppers are tied to the steel framework through the eyelets. Also, certain metal clamps are used to grip the water stop seal and keep it in proper position. Initially, half of the water stopper is places in the concrete. It leaves the other half extended. Then, the other half is embedded that leaves the centre bulb free for expansion and contraction movements. Applications Of PVC Water Stoppers Public Utilities: For bridges, road embankments, tunnels, water tanks, water filtration systems, swimming pools, sewage plants, clarifiers, dams, canals, reservoirs, aqueducts and irrigation projects cooling towers.   Buildings: For basements, foundations slabs, masonry joints, retaining walls, terraces, overhead & underground water tanks and   Industries: For fertilizer steel, chemical plants, waste treatment plants, atomic reactors, thermal & hydro power stations and shipyard & docks. Precautions to take while water stopper installation They are vulnerable to damage during the construction process   The concrete compaction around the water stopper should be taken care of. If not, it can dislocate and lead to a risk of honeycomb formation. This might result in leakage through concrete instead of the joint. Methods for joining PVC water stoppers with heater blade Water stoppers can be joined on the site using a simple electrical heater blade.   Water bars having the same width and design should be sharply levelled with a knife at the   Turn on the Electric Heater Blade. Wait till it becomes hot   Place the water stopper on both sides of heater blade. Press it until it melts but without burning   Remove the heater blade upward   Join the molten ends quickly. Hold them together firmly for approximately 20 to 30 seconds. PVC Water Stopper with Center Bulb 150 (6") x4mm   150 (6") x5mm   150 (6") x6mm.   150 (6" ) x8mm   150 {6") x10mm   200 (8" x 8mm   200 )8") x10mm   240 x 8mm   240x10mm.   250 (10") x8mm   250 (10") x10mm   250(10" x12mm   300 (12") x6mm   300 (12") 8mm   300 (12") 10mm   300 (12" ) 12mm   300(12") 15mm A PVC water stopper is a device used in construction to prevent water from penetrating through joints or gaps in concrete structures, such as basements, swimming pools, water tanks, and underground structures. It is commonly used to provide a watertight seal and protect the structure from water damage. PVC water stoppers are typically made from high-quality polyvinyl chloride (PVC) material, which is durable, flexible, and resistant to water and chemicals. They come in various shapes and sizes to accommodate different types of joints and applications. The most common shapes include "dumbbell" or "center bulb" profiles, which provide effective sealing against water ingress. Installation of PVC water stoppers involves embedding them in the concrete joints before pouring the concrete. The water stopper is placed in the joint, and concrete is poured around it, ensuring a tight seal. The flexibility of the PVC allows it to accommodate slight movements or vibrations without compromising the water seal. PVC water stoppers are preferred over traditional alternatives like rubber or metal due to their excellent chemical resistance, cost-effectiveness, ease of installation, and long-term durability. They are also available in different grades to meet specific project requirements, such as resistance to hydrostatic pressure or chemical

Pvc Water Stop is a profile, based on specifically formulated plasticized PVC composition. Pvc Water Stop are used in concrete masonry construction of hydraulic structure to safeguard from hydrostatic pressure & water seepage. PVC Water Stop also withstands expansion or construction of joints and takes care of any deflection or displacement arising due to change in temperature or settlement of foundation eliminating danger of cracks. PVC Water Stop is engineered as watertight seals in poured concrete structures. PVC Water Stop is tested in factory as per ASTM & manufactured to meet the performance requirements of IS 15058/2002. Packing : It is supplied in the coil form in bundles of 25 meter to 50 meters depending on the size. Applications : Public Utilities : Bridges Road Embankments, Concrete Roads, Tunnels, Water Tanks, Swimming Pools, Municipal Hydraulic Projects, Water Filtration Plants, Sewage Plant, Clarifiers, Sewage Disposal Systems, Neutralization Tanks. Industries : Fertilizer, Steel Effluent Treatment Plants, Thermal Power Stations, Atomic Reactors, Shipyards & Docks, Cooling Towers Agriculture : Dam, Canals, Aqueducts, Large Reservoirs, Irrigation Projects Installation : One-half of the water stop is embedded in the concrete leaving the second half extended. Than second-half is also embedded leaving the centre bulb free for expansion & contraction. Care should be taken in pouring concrete without misaligning the water stop. It can be fused by heater plate at the joint by melting with care.

• Material: Pvc
• Thickness: 2-4mm
• Color: Black
• Feature: Durable, High Quality
• Pattern: Plain
• Moulded Parts Type: Automotive Parts
• Usage: Industrial

• Country of Origin: India
• Type: India
• Material: PVC
• Thickness: 2-4mm,4-6mm,6-8mm,8-10mm
• Length: 20-25mtr,25-30mtr,
• Application: Construction,Expansion Joint,Joint
• Color: Black,Blue,White,Available In Many Colors
• Feature: Best Quality,Durable,High Quality,Nice Finish,Available In Many Colors
• Pattern: Ribbed Design
• Condition: Plain
• Dimension: 150mm-200 Mm,200-250mm,250-300mm,Ribbed Design
• Size: Standard
• Surface Treatment: Polished

• Material: Pvc
• Thickness: 2-4mm, 4-6mm
• Length: 20-25mtr, 25-30mtr
• Application: Expansion Joint
• Color: Silver
• Pattern: Striped
• Application: Industrial
• Feature: Best Quality

Highly efficient in instant prevention of water leakages, our Water Stoppers have huge demand in the market. Our company is enlisted among the successful Manufacturers and Suppliers of Water Stoppers from Punjab. The Water Stoppers we make available are manufactured in adherence with international quality standards and norms. We maintain a large stock of Water Stoppers, to cater bulk and urgent requirements of buyers.

• Type: Acrylic Coating

Our waterproofing services provide a seamless barrier against moisture, safeguarding your structures from water damage. Our expert team employs advanced techniques and high-quality materials to ensure long-lasting protection. From roofs to basements, we offer tailored solutions for residential and commercial spaces. Our precise application and thorough inspection guarantee optimal results. With a focus on durability and reliability, trust us to keep your property dry and secure. Elevate your building's integrity with our top-notch waterproofing services, shielding it from potential water-related issues.

We make available a huge product basket that our quality auditors check closely to maintain the set standards. To guard our complete range of goods from exterior causes that can be damaging, we have a high-tech packing unit armed with the newest safe packaging technologies and supplies.

• Material: PVC
• Color: White
• Country of Origin: India
• Shape: Rectangle
• Usage/Application: Cooling Tower
• Size/Dimensions: 600x300x150mm
• Sheet Thickness: 2mm

• Color: Grey
• Country of Origin: Made In India
• Brand Name: KJS Concrete
• Usage/Application: Drainage
• Dimensions(mm): 600 X 450 X (70/150)thickness
• Compressive Strength(N/mm2): > 20
• Weight(kg/no): 57
• Size: Standard
• Pattern: Plain
• Surface: Polished

• Material: Pvc
• Color: Black, White
• Condition: New
• Application: Construction
• Length: 20-25mtr
• Thickness: 2-4mm, 4-6mm, 6-8mm, 8-10mm, 10-12mm
• Country of Origin: India
•  Type: Pvc Water Stop Seal

PVC Water stops are profile based on specially formulated plasticized PVC composotion.PVC water stops are used in concrete masonry construction of hydraulic structures to safeguard from hydrostatic pressure & water seepage. It also withstand expansion or contraction of joints & take care of any deflection or displacement arising due to change in temperature or settlement of foundation, eliminating danger of cracks. These are engineered as water tight seals in poured concrete structures.   APPLICATION     IRRIGATION PROJECTS like Dams, Canal, Aqueducts, Siphons PUBLIC UTILITES like Tunnels, Water tanks, Sewage plants, Swimming Pool, POWER PROJECTS like Thermal Power Stations, Large Reservoirs INDUSTRIES like Effluent Treatment Plants, Fertilizers, Refinery, Steel Plant, Retaining Walls BUILDING like Foundation Slabs, Retaining Walls, Water Tanks

• Type: Hydrophilic
• Material: Plastic
• Color: Brown
• Feature: Durable
• Thickness: 2-5 mm
• Surface: Polished

• Application: Construction
• Size: Standard / as Required
• Finishing: galvanized Silver/Self Machined
• Packaging Type: 50 Pcs Bag / as Required
• Brand Name: Pensla
• Suitable Threading: 15/17 mm and 18/20 mm 360 – 740 Grams / as Required
• Load Capacipy: 110-145 K.N
• Material Used: Malleable Casting Bs32-12/ S.G Iron Casting
• Accessories: 2 Plastic PVC Cap (virgin Quality)
• Minimum Order Quantity: As Per Customer Needs

• Minimum Order Quantity: As per Client Requirement
• Minimum Order Quantity: As per Client Requirement

We are capable of make on-time deliveries of the product range that we keep safe in our massive warehouse. We have invested a large amount for developing all-the-in-house storage facility that is managed and maintained by our diligent professionals. Also, it keeps us free from stock-out situations.

• Application: Sink
• Color: Black
• Feature: High Quality

• Color: Black
• Condition: New
• Type: Pvc Water Stopper
• Country of Origin: India
• Thickness: 2 mm
• Size: 1 inch

• Material: PVC
• Thickness: 4-6mm
• Application: Construction
• Color: Black
• Pattern: Plain
• Size: Standard
• Surface Treatment: Polished

Pros Of Our PVC Water Stoppers : Very good resistance to corrosion Excellent inherent elasticity and impermeability Safeguard from hydrostatic pressure and water seepage Can handle expansion and contraction movement of the joints Available in coils that ensure easy handling with high flexibility Used in concrete masonry construction of hydraulic structures Never discolour concrete and capable to withstand hydrostatic pressure Known for high tensile strength and have the longer elongation capability Extremely alkalis, chlorinated water and other waterborne chemicals resistant Can be easily installed by tethering the outer flanges of the PVC water stop to adjacent reinforcing bars

• Material: PVC
• Color: Transparent
• Surface Treatment: Glossy
• Application: Construction, Joint
• Size: Standard
• Pattern: Plain
• Country of Origin: India

Architectural Structures-Basement, Foundation, Terraces, Retaining Walls and Buildings, Streams, Harbors, Railways and Roads-Dams, Banks, Reclaimed Lands, Tunnels,Underpasses, Subways, Overpasses, Platforms.Water Supply and Sewerage-Reservoirs, Detention Ponds, Clean Water Ponds, Processing Ponds, Water Channels.