Cutter Head Dealers

• Material: Aluminum
• Brand Name: SKT
• Color: Red
• Head Diameter: 5 Inch
• Packaging Type: Packet
• Usage/Application: Brush Cutter
• Thread Material: Nylon

B/u

This tool head is for hard-to-get-at medium to extra thick deposits ranging from gummy to hard. Four cone cutters fitted on arms of unequal length are pivoted at the spider on the rear of the cutter head, which gives maximum tube cleaning range. It is supplied with an adaptor for straight tubes and universal joint for curved tubes.

• Spare Part: Code
• Knife: 200@501215
• Knife: 200@301215
• Spur: 100@14142
• Screw: 300@0669
• Screw: 300@0820
• Nut: 400@131058
• Wedge: 500@451212
• Wedge: 500@451212

These Cutter Heads are designed for cleaning straight and curved tubes as found in Boilers, Air Heaters, Economizers, etc. Cutter Heads are provided with 3 cutter wheels, one each of straight teeth, teeth cut right hand, teeth cut left hand, for quicker cleaning and prevention of scale grooving.

The Brush Cutter Trimmer Heads, provided by us, is known for its quality. In order to produce quality products, we make use of superior grade raw materials. Our quality auditors strictly check the raw materials against varied quality parameters before procurement. For settling down the financial transaction with our clients through transfer of money, we make available different payment options including online and offline payment procedures.

• Type: Cutter Head

Tool head cutter, we use EN 1A material which can be hardened. It is properly machined on CNC and has exact dimensions. Due to hardening and by using EN 1A material the cost increases but the life of cutter increases by ten times. We claim and can prove that we manufacture and supply best quality tool head cutters.

• Type: Polyester Staple Fiber
• Material: Polyester, Pure Polyester
• Application: Filling Soft Toys, Pillows, Wadding
• Grade: Agrade, Virgin
• Color: Creamy, Off White, Semi-Dull White, White
• Feature: Abrasion-Resistant, Anti-Distortion, Anti-Microbial, Anti-Pilling, Anti-Static, Flame Retardant, Heat-Resistant
• Pattern: Dyed, Non-Siliconized, Siliconized
• Technics: Machine Made, Stapled
• Country of Origin: India
• Material: Metal
• Color: Silver
• Finish: Polished
• Feature: Durable
• Usage: Industrial
• Speed: High, Medium, Slow

NYLON GRASS TRIMMER HEAD FOR PETROL BRUSH CUTTERSThe grass trimmer head head can be fitted in almost all petrol operated brush cutters.It is designed for heavy duty, commercial grade for Petrol Brush Cutters. The grass trimmer head is heavy duty item and it is excellent for both grass, weeds, and heavy brush. The tough solid 2 ways nylon line will provide excellent service. The grass trimmer head is easy to install and is easy to use in almost all types of Petrol Brush Cutters.

The Model "P" & "TC" cutter head is for straight tubes from 1-1/2" I.D. through 7" I.D. It is usually direct coupled to drive motor but flexible couplings, universal joints or flexible holders, are used to negotiate curved or bend tubes. The model "P" & "TC" is for heavy and hard tube deposits as found in refinery and still tubes. It is tough in its parts and assembly as necessary to stand up in this service and it makes economical provision, as described below, for inevitable wear due to large forces which must transmit through the assembly. The model "P" & "TC" is conformed to do its work quickly and thoroughly even when deposits are of varying thickness and hardness. Cone cutters, with tapered cutting edges at the front of the cutter head, expand against tube deposits by centrifugal force and break up uneven shoulders of scale. This is followed by long rows of expanding "no-track" cutter wheels which finish up with thorough, repeated cuts. Centrifugal force assures good working contact between tube deposits and cutting edges and " no track" means that cutters cannot fall into a pattern which skips over and leaves strips of scale behind. The expansion range (range of cutter head diameters) of these cutter heads is considerable (See chart below.) and is due to (1) slotted cutter pin bearing bores and (2) intentional "play" in pin bearing inserts, features which include an economical bonus. Large cutter forces transmit through and wear the cutter pin bearing bore. By designing this bore into a replaceable insert, cutter body life is greatly increased, obviously providing increased economy of operation and service life.  

Application: These heads fit replaceable knives and can be assembled for use on horizontal or vertical spindles for Planing operations. The length of cut is 30mm or 50mm. The assembly is simple and achieve by dowel locking. The recess on the tools body.Material : Hard alooy body (Aluminum) with T.C.T. knives.Use on : Shapers machine & four side moulder.Spares 1:KNIVES : 30x12x1.5WEDGE : 29x15x10SCREW : M8x15GSpares 2:KNIVES : 50x12x1.5WEDGE : 49x15x10SCREW : M8x15G

Highly wear-resistant brazing consumables for rock and mining tools.  

These Cutter Heads are designed for cleaning straight and curved tubes as found in Boilers, Air Heaters, Economizers, etc. Cutter Heads are provided with 3 cutter wheels, one each of straight teeth, teeth cut right hand, teeth cut left hand, for quicker cleaning and prevention of scale grooving.

• Material: HSS
• Brand Name: HTT
• Coated: Powder Coated
• Dia. (mm): 150
• Bore (mm): 25.40
• Thick (mm): 25
• Screw: M5 x 10 C

These Spring Loaded, Self Expanding Cutter Heads are designed for Rapid Removal or Hard and Obstinate Scale formation in Straight Tubes ad found in Evaporators, Juice Heaters, etc. It consist of Three Bevels , 4 Straight Cutter Wheel, 4 Left Cutter Wheels and 4 Right Cutter Wheels fitted on Three bridge type arms.

• Material: Aluminium
• Color: Silver
• Feature: Easy And Convenient to use, 100% Brand New And High Quality.
• Brand: Sadaiv Nipun
• Power: 35 cc / 52 cc / 63 cc
• Weight: 621 grms
• Size/Dimension: 13cm*5cm*10cm / 5.12x1.97x3.94inch
• Diameter: 28mm Casing Inner Diameter
• Spline Drive: 9 Spline Drive

Our clients tell us we are unique for a variety of important reasons including: Single-acting, spring return on all models, except WHR-1250 Guillotine action for easy operation Lifting handles on larger models for easy transport Carrying bag included for easy carrying and tool protection Ideal for use with most Enerpac pumps featuring 3-way valve or dump valve and 700 bar pressure rating (except WHR-1250, which requires 4-way valve) CR-400 coupler and dust cap included on all models.

With our wide connectivity, trustworthy shipping facilities, we are flexible in delivering the product basket to the clientele within the dedicated time. We are associated with leading names that enable us to deliver top-of-the-line quality products in the markets. Also, our vendors aid us completely in delivering high quality raw material.

• Material: MS
• Applications: Road Repairs, Trenching, Shaft Sinking, Soil Stabilisation, Quarrying, Profiling, Steelworks, Demolition, Concrete Refurbishment, Scaling, Building Works, Mining, Road Works, Underwater, Frozen Ground
• Capacity: 5 Ton
• Surface Finish: Galvanized