Cutting Press Dealers

• Type: Automatic
• Certification: CE Certified
• Voltage: 380V
• Power: 3-6kw
• Driven Type: Electric
• Warranty: 1 Year
• After-Sales Service Provided: Spare Parts
• Weight: 100-200kg

The Hot Foil Platen Die Cutting Machine comes with attachment available in single, double & triple colors. Equipped with electric heating & temperature control device, the Hot Foil Platen Die Cutting Machine has separate time controller for each step. The clients can avail Hot Foil Platen Die Cutting Machine from us in bulk quantity.

A Pneumatic Specimen Press(cutter) for cutting flat and soft paper, rubber, plastic materials into samples or standard shape specimen. Testing Machine of Pneumatic Specimen Press is able to coordinate with various cutters to cut them into samples or into standard shape specimen. Ready for tensile resistant test, tearing test, elongation, aging, sample, and other tester. This tester is suitable for soft material such as paper, rubber, soft plastic, polyfoam, etc.. Pneumatic specimen press takes advantage of pneumentic compress to provides an automated media force to give a easy and clean cutting enviroment foe specimen preparation v. This test product can meet your testing requirement and supply solutions of problems.     Specification :   Suitable Material: Rubber, soft plastic, leather, etc.   Area of Pressing Plate: dia. 148mm Stroke : 100 mm Output : 1000 kg Power Source : Air compressor, about 7 kg/cm² Attachment: Cushion board one piece. Safety shield provided to eliminate accidents Pressure Gauge with filter and solenoid valve is provided Electric Power for safety shield operation : 220-230VAC. Dimension: 30×40×60(h)cm Weight: 50 kg Feature: Easy to operate, energy saving, time saving.

experience and a competent team of professionals, we are able to offer Cutting Press. The offered range of industrial cutting press is suitably inspected in varied characteristics to ensure its adherence with the highest quality norms and standards. Along with this, the offered range of industrial cutting press is available in different designs, shapes and sizes in accordance with the diverse requirements of esteemed clients.   Other information:   This range is available with 2 H.P. motor, a starter and a measuring tape to provide an accurate length of the cut rim This range is also ideally applicable for cutting the rim spiral and are capable of cutting rims from 16" dia to 28" dia In addition to this, the offered range renders high functionality to clients for a variety of industrial processes

Round corner cutting pres is used to cut the corners of books & files for improving the functional & asthetical values. The machine is hyfraulically operated & can be doubled up for double hole punching.

• Frequency: 50 Hz
• Power: 1-3 Hp
• Material: Mild Steel
• Power Source: Electric
• Voltage: 220 V
• Phase Type: Three Phase

We have a team of quality examiners who strictly check the product quality so as to attain maximum client satisfaction. Our team professionals ensure that smooth transactions are done and for that reason, we accept payments through letter of credit and money transfer. This makes us most reliable amidst the clients.

These jewellers' hand presses are available in six sizes. These are solid body heavy presses with 25 mm one inch hole in ram. The presses are supplied with wheel & handle and die fixing clamps. Suitable size automatic die holder is also supplied with each press. Also available are Cutting, Embossing & Coining Dies. 

• Type Of Press: HYDRAULICS
• Material To Be Cut: RUBBER & PLASTICS
• Material: MILD STEEL
• Brand Name: IKON INDUSTRIES
• Capacity: 5 TON
• Automation Grade: Semi-Automatic
• Certificate: Traceable to NABL

Capacity upto 5 ton Material Rubber & Plastic Hydraulic type specimen cutting press is suitable for Quick and accurate cutting of specimen. It can accommodate various types for cutting die and the pressure can be released quickly to remove the specimen.

• Application: Industrial
• Features: Easy to Use, Corrosion Proof, Low Maintenance
• Price: Affordable Price
• Construction: Sturdy Construction
• Sizes: Different Sizes
• Compliance Type: ASTM, DIN
• Standards Type: Is
• Usage: Hard Plastic Cutting
• Quality: Optimum Quality

Our range of Dumbbell Cutters is manufactured using high grade material. These are available in different sizes and varieties like tear cutters and straight cutters. Dumbbell Cutters are known for their excellent performance and long serviceability. We also offer heavy version cutters that are widely used for hard plastic applications. Further, we ensure that the entire range is in compliance with ASTM, DIN, and IS standards.

Die Cutting Presses Hydro-Pneumatic Hydraulic, Specially for Screen Printers, Controlled Pressure, Ideal for half & full cut of any size & shape, Punching Area : 12" x 18" 15" x 20" 19" x 25".

• Size: 900 x 820 x 1400mm
• Model Number: BS-200
• Brand Name: BSM
• Material: MS
• Shape: Custon
• Application: Cutting
• Weight: 740Kg
• Color: Orange
• Automatic Grade: Semi Automatic
• Motor Power: 750W
• Phase: 3
• Lead Time: 24 hours
• Usage/Application: Footwear, Automotive
• Approx Price: 180000

The Pneumatically Operated Test Sample Cutting Press is by far the most effortless and safest way to produce cut samples from materials such as plastics, fabrics, boards and paper. The press is robust and compact using a limited amount of space and is ideal for any laboratory or workshop without the need to be bolted to a bench or worktop.The cutting process is simply done by pulling the protective polycarbonate screen in a downward direction and letting the press do the rest, generating cutting forces up to 50 KN (depending on the input pressure) to easily cutting through sheet materials such as polypropylene and polyethylene up to 8mm thick.The press is supplied with a cutting base of 25cm x 15cm and a polypropylene cutting board to support the material the sample is to be cut from. A polycarbonate safety guard which will not allow the machine to operate unless it is in the closed position ensures operator safety. To deliver maximum performance the cutter must be set up relative to the cutting board so that at full stroke, the cutter will just depress the surface of the cutting board.The fixing arbour on the press will accept a 25mm dia cutting tool shank as standard. Other size fixing arbours can be supplied to customer requirements.In most cases, the thickness of the material that can be cut will not just depend on the strength of the material, but also on the lateral flexibility of the material to allow the cutter to penetrate down into, and pass through the material.Technical Specification Pneumatically operated up to 10 bar (150 psi) Automatically operated Polycarbonate guard Cutting force up to 50KN 25cm x 15cm sample platform Adjustable cutting arbor with locking handle Suitable for rubber, plastic, paper, fabric or laminates Polypropylene cutting board Product user manual CE declaration certificate Optional Ancillaries Test sample cutters to any International standard Traceable calibration certificate Polypropylene cutting board

Foam,EVA,Plastic Hydraulic Beam Cutting Press Use and characteristics 1. This Hydraulic beam cutting press is mainly suitable for cutting various nonmetal materials, Such as leather, EVA, Foam, Rubber, Pu Clothing Material,Tumbling Pu Clothing Leather and so on. 2. Adopt double oil cylinder,...   Use and characteristics   1. This Hydraulic beam cutting press is mainly suitable for cutting various nonmetal materials,  Such as leather, EVA, Foam, Rubber, Pu Clothing Material,Tumbling Pu Clothing Leather and so on. 2. Adopt double oil cylinder, precise double crank connecting rod mechanism, which can guarantee that the cutting depth at every cutting position is same. 3. It can suppot single-side or double-side automatic feed attachment and raise the working efficient of the whole machine by two or three time. 4. When the cutting board of die cutting machine contacts the die cutter,it will carry out slow cutting,so that ensure there is no size error between the uppermost layer and lowermost layer of cut materials. 5. The materials are driven by the servo motor and input from one side of machine, and after die cutting, output from the other side, which can guarantee accurate feeding and stable operation.  6. With special setting mechanism,and in conjunction with die cutter and cutting depth setting,the travel adjustment is simple and accurate.  7. Center automatic lubrication system can quarantee the precision and can raise abrasive resisitance.  8. We will meet the customers’ needs, making the Bag hydraulic precision four-column die cutting machine on request.   Main Technical Data(Customizable) --Foam Cutting Machine     Model XCLP3-C Maximum cutting force 30T 35T 400T 500T 600T 800T 1000T Working table(mm) 1600*500 1600*610 1600*610 1600*800 1600*800 1600*900 1600*900 Main motor power(kw) 1.5 3 3 4 5.5 7.5 7.5 Machine weight(kg) 1600 2300 1600 3200 4200 4600 7000

Established in the year 1987, at Ahmedabad (Gujarat), “Anil Industries,” are a leading manufacturer and exporter of Steel Rolling Mill Plants and its allied Machinery. Our range includes Hot & Cold Steel Rolling Mill such as Structure & Bar Rolling Mill, Fully Automatic, Semi Automatic and Manual from 6” to 30” capacity. We have a sophisticated manufacturing unit that is equipped with Lathe machine, Planno miller, Hobbing machine, Flow Boring, Boring Machine, Mig wellding and hydraulic power press etc. ensure smooth production process. To ensure delivery of quality products to our clients, we have also appointed a team of quality controllers who stringently check the products at various stages of production. Backed by a dexterous team, we are also able to meet the variegated demands of our clients in a stipulated time frame. We have been guided by our mentor, Mr. J.P. Singh, who has enabled us to carve a niche for ourselves in the market. His vision and sharp business Knowledge has helped us to be a market leader in the country as well in the world.

• Model: : SSI 510 DPFW (Dumb Bell cutting press with Fly Wheel)
• Force Applied: : Manually Using Heavy Fly wheel
•  Material of Construction: : MS (painted / chrome plated)
• Delivery: : 2 to 3 weeks
• Packing: : One Wooden Box

Model Number: SSI 510 DPFW   The Press is deigned to accept various types of Dumb Bell and Sample Dies for cutting the sample.   Description   The Press can be used with various Dumb Bell and other types of dies to cut the sample from sample sheets. The press is designed to minimize the human effort required to cut the sample, by using the heavy wheel. When the operator turns the wheel, the wheel gains the momentum due to its weight and applies large force on the cutting die. . This type of cutting press is very simple and useful to operate especially for harder sample materials. The press can be installed on top of a table and operated by a single person. The Die cutter can be interchanged by just loosening one LN screw.

This is a combined 40 tons capacity hydraulic cutting & embossing press suitable to make gold & silver coins of upto 10 grams weight. The press can be operated manually or in auto single cycle mode. The base of the press is provided with T slots to hold coin cutting die for cutting coin blanks. It is also suitable for coin embossing operation. The press is available in 30 tons & 50 tons model also.