Data Acquisition System
Get Price Quote
10 pieces (MOQ)
We are a prime Manufacturer, Exporter and Supplier of Data Acquisition Systems. These Data Acquisition Systems are used to analyze some phenomenon or collect information to document. Our offered Data Acquisition Systems are reliable, accurate, and versatile. These Data Acquisition Systems are highly demanded in chemical, Pharama, oil & gas industry for their performance. We offer these Data Acquisition Systems at industry leading prices.
ITA-100 Series On-line Vibration Data Acquisition Systems
Get Price Quote
1 piece (MOQ)
The ITA-100 series comprises two high-performance data acquisition systems for vibration-based measurement applications. The ITA-110 is a 16-channel multiplexed unit for low-cost machinery surveillance while the ITA-120 has 8 simultaneous channels for high-speed complex machinery monitoring. Both devices are on the same mechanical format and have common communication features. Both devices can accommodate standard IEPE accelerometers with an independent accelerometer power source per channel. Alternatively, input channels can be configured as DC or AC coupled inputs by jumper setting. This allows accelerometers with temperature output to be connected directly to the units enabling vibration, bearing condition and bearing temperature to be measured. Bandwidths up to 40kHz are accommodated with 24-bit resolution. Flexible trigger and tacho functions are available, enabling pre- and post-trigger and order analysis to be performed. The gated acquisition is available ensuring that readings are taken when a machine is running. The simultaneous sampling features of the ITA-120 enables multiple orbit traces to be gathered. Both devices communicate over a standard 100BaseT Ethernet LAN or via 802.11b/g/n WLAN network. Enclosures sealed to IP66/Nema4X with power supply are available. The ITA-100 series replaces the ITA-1 which has been the workhorse data acquisition unit for many monitoring applications with thousands installed around the world.
0.0
Website
Best Deals from Data Acquisition System
Digital Data Acquisition System
Get Price Quote
1 Piece (MOQ)
0.0
Website
Data Acquisition System
22,500 - 45,000 Per Piece
1 Piece (MOQ)
Data acquisition is the process of measuring an electrical or physical phenomenon such as load, pressure, torque, voltage, current, temperature, pressure, or sound with a computer. A Data acquisition system consists of sensors, measurement hardware, and a computer with programmable software. Compared to traditional measurement systems, PC-based Data acquisition systems exploit the processing power, productivity, display, and connectivity capabilities of industry-standard computers providing a more powerful, flexible, and cost-effective measurement solution.A Data Acquisition System is comprised of three parts; an I/O sub-system, a host computer and the controlling software. However, some systems, such as the Power DNA Cube running a standalone Linux application combine the I/O sub-system and the host CPU in the same package. These systems are often referred to as embedded DAQ systems.
Data Acquisition System
Get Price Quote
USB Data Acquisition System
Get Price Quote
USB Data Acquisition SystemVPL-DAS-5412 VPL-DAS-5412 is a USB based data acquisition and control module which provides analog to digital, digital to analog, digital input/output, optically isolated digital input/output, relay drivers and other functions.SPECIFICATIONSAnalog InputNo. of input channels : 16 single ended, 8 differentialsAnalog resolution : 12 bits, 1 is 4096Input type : Unipolar, BipolarAnalog input : 0-5V, 0-10V, +5V, +10VAnalog OutputNo. of DAC : 2Type of DAC : 12 bitOutput voltage range : 0-5V, 0-10V, +5V, +10VDigital Input/OutputI/O lines : 8Relay driver lines : 8 with LED indicatorOptically isolated lines : 2 inputs, 2 outputsExternally latched lines : 8Compatibility : TTL compatibleInput/Output ConnectorsADC/DAC interface : 26 pin FRC connectorDIO lines : 50 pin burg strip connectorCommunicates with PC through USB portData AcquisitionSampling rate : 100K samples/sec (single channel)VPL-DAS-5411 USB Based Data Acquisition SystemFEATURESTimer & I/O Lines48 programmable I/O linesThree Channels of 16 bit Timer/Counter expandable to six channels with a count rate of 2/10 MHzHardware clock selection for Timer/CounterOpto Input/Output Lines8 Optically isolated input lines (optional)8 optically isolated output lines (optional)Isolation voltage is more than 1500V.Input voltage range of 0-25V (for optical input).High speed immunity (Optical I/O)0 - 3V is treated as logic low3 - 25V is treated as logic highFrequency response upto 10KHz (Optical I/O)VPL-DAS-5410 USB based 16 Ch A/D ModuleFEATURESResolution : 12 bitChannels : 16 single-ended or 8 differentialInput Range : +/-150mV,+/-500mV,+/-1V,+/-5V,+/-10V,+/- 20mASampling rate : 90 K/sInterface : USBVPL-DAS-5413 USB based Stepper Motor ControllerFEATURESIndependent and simultaneous operation of upto three motors.Programmable step rate from 4 msec. to 1 sec. per step.Number of steps per command range from 1 to 9999.Built in acceleration/deacceleration control.Software Control for clockwise & anti clockwise movement.Easy step position monitoring.PC interface through USB Port
SL1000 HIGH-SPEED DATA ACQUISITION UNIT
Get Price Quote
Selecting a data acquisition platform for electronics or mechatronics applications has always been a balancing act. High speed digitizers lack the isolation, attenuation, or bit resolution necessary for power electronics testing. PC-based platforms with fast streaming throughput sacrifice noise immunity, signal conditioning, and hardware integrity. Until now. The new Yokogawa SL1000 is the only data acquisition system that delivers independent, isolated channel hardware at 100MS/ch rates, with no compromise in bit resolution, memory depth, or streaming performance.
0.0
View Profile
Data Acquisition System
Get Price Quote
1 Piece(s) (MOQ)
Our interface data acquisition is compatible with pc based on a modular construction. A complete set up for detailed study of instrumentation system is offered, which includes various peripherals, accessories and the required hardware for pc. The necessary software shall be provided along with the set up. Our industrial data acquisition systems consist of the following modules module I : computer will not be supplied. (to be made available by the user)module ii : interface unit for ibm compatible pc.module iii : separate units with power supply, digital display and signal conditioning for every transducer.module iv : transducers besides, we are one of the most trusted data acquisition system manufacturers in the business. The instrumentation trainer interfaced with ibm compatible pc is based on a modular construction. A complete set up for detailed study of instrumentation system is offered which includes various peripherals, accessories and the required hardware for pc. The necessary software shall be provided alongwith the set up.
Data Acquisition System
Get Price Quote
Salient Features DUMAC software is used for monitoring Dual Source Plus meters using RS485. By the software user can communicate upto 255 meters through a single port. User can configure all meter parameters,change relay setting through the software itself. Reports can be Generated in excel format also User can see the details of corresponding meter in a much compact way which includes 1.Instantaneous parameters 2.History Data 3.Mains to Generator Data 4.Generator to Mains Data
0.0
View Profile
Data Acquisition System
Get Price Quote
HMI (Human Machine Interface) is a medium for information exchange and mutual communication between electromechanical system’s and the user. It allows the user to complete settings through touchable images or keys on the user-friendly window. This not only offer’s fast and convenient control of manufacturing automation, but also has replaced traditional controlling panel’s which need extensive wiring. Human Machine Interface (HMI) equipment provides a control and visualization interface between a human and a process, machine, application or appliance. HMIs allow us to control, monitor, diagnose and manage our application. The Human Machine Interface (HMI) includes the electronics required to signal and control the state of industrial automation equipment. These interface products can range from a basic LED status indicator to a 20-inch TFT panel with touch screen interface. HMI applications require mechanical robustness and resistance to water, dust, moisture, a wide range of temperatures, and, in some environments, secure communication. They should provide Ingress Protection (IP) ratings up to IP65, IP67, and IP68. Features and Benefits Supports high source and sink output IO capabilities up to 60mA for direct drive of LEDs. High-speed PWM units enable LED dimming and screen back lighting. Robust touch technology provides reduced wear and increased product lifetime. The excellent signal-to-noise ratio makes the design immune to water, moisture, or dust and enables operators to use gloves. Capacitive touch eases design of full hermetic or sealed products, while power efficiency minimizes heat dissipation.
0.0
View Profile
Data Acquisition Systems
Get Price Quote
Nippon Technologies was established in 1991 with the objective to design & manufacture INSTRUMENTATION products. In the journey of twelve years range of products delivered have become 'benchmark' in the industry. A milestone was reached in 1997 with introduction of state-of- art data acquisition system The customer acceptance was enormous. Nippolog is constantly upgraded as per the requirement of industry. We have invested more than 25 man-years in up gradation of Nippolog. Today Nippolog is flagship product of the company, it consists of SCANNERS, CONVERTORS, MEMORY BANKS & SOFTWARE. If your measurement & data logging application involves a diverse array of sensors or events, located centrally or over large distance, then Nippolog is the answer. Nippolog can become foundation of your measurement & data acquisition. It increases PRODUCTIVITY through accurate measurement, data acquisition, data analysis & data visualiz. Nippolog- a robust architecture functions reliably even in electrically & environmentally harsh environment. The software periodically aquires data from scanners and presents it in various forms at the user's monitor. Nippolog is interactive and very simple to use. It's features include Graphical Trends, Tabular Listing, Batch-wise data archival, Online Help, and many others. This becomes simplest tool for dozens of uses. Nippolog finds application in Pharmaceuticals, Bulk Drug, Dyes and Chemicals, Petrochemical, Engineering, Power Plants, Glass, Textiles, Air-Conditioning/ Refrigeration, Test Laboratories and many other industries. There are over One hundred successful installations.
0.0
View Profile
Soil Data Acquisition System
Get Price Quote
1 Piece (MOQ)
Features : Supports all kind of sensor input upto 1000 chs D esigned for electrically noisy environment 17" 4U Height Rack Mountable Plug And Play Modular Design Main Unit Can Host up to 96 Channels Any Module can be used in any slot. Another Unit can be added to expand the capacity. Data Transfer can go up to 1KM Easily Can be connected to Any PC through USB port 256 KB non volatile memory to store data Inbuilt RTC. All parameters are programmable Without PC it can work in stand alone mode. Data can be transferred any time in PC. This can be controlled directly through PC Customized intelligent firmware
Remote IO Data Acquisition System
4,000 - 12,000 Per
Remote I/O and Data Acquisition System (MODBUS Serial & TCP/IP) is 32 bit ARM CPU based DIN rail based Innovative modular I/O system which provides a simple low cost solution for distributed I/O requirements. Stand-alone Digital and Analog I/P and O/P modules are connected on RS485 2-wire multi-drop network or on TCP/IP Ethernet.
0.0
View Profile
Data Acquisition System
Get Price Quote
Due to a vast industry experience, we have emerged as a prominent Importer and Supplier of Data Acquisition System. Our entity is based in Karnataka, India. Data acquisition (DAQ) is the process of measuring an electrical or physical phenomenon such as voltage, current, temperature, pressure, or sound with a computer. A DAQ system consists of sensors, DAQ measurement hardware, and a computer with programmable software. Compared to the traditional measurement systems, PC-based DAQ systems exploit the processing power, productivity, display, and connectivity capabilities of industry-standard computers providing a more powerful, flexible, and cost-effective measurement solution.
0.0
View Profile
Data Acquisition System
5,000 - 50,000 Per Piece
1 Piece (MOQ)
Prima can supply IOT to meet any requirement. Data can be seen on Prima mobile and Computer app or on Siemens Mindshere platform.
Data Acquisition System
18,500 Per Piece
1 Piece (MOQ)
BS Data Acquisition Systems
Get Price Quote
BS-Daq box deliver very high performance measurement of electrical data. It can be used for recording of field data and processing of field data through special software supplied.Daq box contains high resolution analog input, high resolution analog output, high speed digital input/output and counter time with dedicated signal conditioning for LVDT, load cell, RTD and thermocouple. Box consist of 8 Analog inpu,2 analog Output, 8 DO/DIa and 2 counter. Signal conditioning for Load cell, RTD, Thermocouple and LVDT. Real time hardware LVDT,Load Cell,Thermocuple RTD. LabVIEW based software for acquisition of data. Software to analyze acquired data. Driver for MATLAB. Data acquisition or control for other hardware (Pressure,Force,Distance,Current etc). Extensive reporting tools.
0.0
View Profile
supervisory control and data acquisition system
50,000 Per Piece
0.0
View Profile
DAMS Data Acquisition And Management System
165,000 Per piece
1 Piece (MOQ)
Introduction:This device is used for Real Time Data Transmission (current format) to Cloud Server of CPCB & SPCB by M to M methodology with IoT based next generation featured. Remotely visualizing real time data on PC & Smart Mobile phones. This DAMS series comprises of advanced data-logging devices for real-time environment monitoring.Application:Remotely visualizing real time data on PC & Smart Mobile phones. Real Time Data Transmission & Analysis tool to find pollutants trends. Life time licenses relevant software.Features: Remote monitoring. WebFRONT Web SCADA Cloud gateway. Easy configurator with inbuilt Web User Interface (Web UI). MODBUS RTU RS-485 & MODBUS Ethernet/IP. File Transfer Protocol (FTP) to other server and USB data recording. Cloud server connectivity. Alerts: SMS, Email. Signal Scaling. DAMS series comprises of advanced data- logging device for real-time environment monitoring. Rugged design for rough Industrial conditions. Real-time data collection. Data-quality indication. Transfer to Central Server Portal (New Guidelines). Over-The-Air (OTA) upgrades. Remote configurable as IoT based technology. Internal 3000 records storage
0.0
View Profile
Digimatic Gauge 4 Channel Interface
Get Price Quote
Features:1. Data Inputs 4 or 3 channels Digimatic and D SUB 9 serial interface2. Data output USB, USB HID KEYBOARD interface for PC EXCEL sheet data collection3. RS232C standard or customized as per customer requirements4. RS485 Modbus RTU for direct communication with PLC5. Foot Switch compatibility6. Interface cable connection For serial cable: D-SUB 9 for USB: cabletype BData Format:1. Baud rate 1200 or 96002. Data bits: 83. Stop bits: 14. Parity: none5. OS compatibility: Microsoft® Windows® 2000, XP, Vista®, 7, 8, 8.1, 10 (32bit, 64bit)6. Supply voltage -DC 9-12 V Adapter7. USB output for Data Excel Keyboard Interface (4 different columns)
0.0
View Profile
Post Free Ad
