DC Voltage Data Loggers Dealers

Channel DC Current Datalogger

Get Price Quote

Features   Triple LCD simultaneously displays 3 (0 to 20mA) current channels.Datalogger date and time stamps, also store readings on an SD card in Excel® format for easy transfer to a PC.Selectable data sampling rate: 1, 2, 5, 10, 30, 60, 120, 300, 600 seconds etc.

current loggers -PicoLog CM3 Current Data Logger

Get Price Quote

PicoLog CM3 Current Data LoggerThe PicoLog CM3 is a three-channel data logger that uses industry-standard current clamps.  Simply connect to your PC via USB or Ethernet, run the supplied software and you can monitor and log current for a wide range of applications.  - High accuracy with 24-bit resolution- Suitable for single or three-phase AC currents - Optional 0 to 200 A AC current clamps- Can also be used to measure AC RMS voltage- Up to 20 units can be run on a single PC- Connected via Ethernet (PoE compatible) or USB- Uses free PicoLog 6 data logging softwareTypical applications:- Mains current monitoring- Three-phase load balancing- Long-term energy use recording- Energy and cost saving / ISO14001 monitoringNon-invasive current clamps:The PicoLog CM3 measures current using industry-standard AC current clamps. These clamps have opening jaws so can be installed in seconds with no physical connection to high voltages. AC current clamps require no power supply or batteries so are ideal for long-term energy-use monitoring and logging.Pico supply 200 A AC current clamps as standard. If you need to measure higher currents we will be happy to advise on suitable clamps for your application.The PicoLog CM3 is available on its own so you can add your own current clamps or as a cost-saving kit with three 200 A clamps included.USB or Ethernet connection for local or remote logging:With both USB and Ethernet interfaces your PicoLog CM3 can be used in a variety of situations. If you need a portable instrument that can be used at various locations and is fast to set up and use, simply connect your laptop to the PicoLog CM3 by USB.  No external power supply is required as the CM3 is powered from the USB port.Need to monitor a situation over a period of hours or days, or from a remote location? Plug your PicoLog CM3 into a spare port on your network and then access it remotely either from your LAN or over the internet. When using Ethernet the CM3 can be powered either by Power over Ethernet (PoE) or by using the USB connection just for power. Please note that PicoLog 6 data logging software only supports Ethernet connection in Windows.   PicoLog CM3 PicoLog 6 softwarePicoLog 6 data logging software for PicoLog CM3PicoLog 6 is a complete data acquisition software package for the PicoLog CM3 current data logger. It provides a visual, easy-to-use interface allowing you to quickly set up simple or complex acquisitions and record, view and analyze data.-Real-time data collection and display-Visual logger and channel setup for easy configuration and viewing-Available for Windows 7, 8 and 10 (32 and 64-bit), macOS, Linux and Raspbian for Raspberry Pi-Virtually unlimited logging capacity to PC-Robust database format minimizes data loss and corruption-Simple and complex programmable alarms- Up to 4 independent graph axes-Data can be exported as CSV, clipboard image and PDF-Supports multiple different PicoLog data loggers and PicoScope oscilloscopes on the same PC

Digital Current Data Logger

Get Price Quote

• Warranty: 1 Year
• Weight: Approx. 265g
• Type of Data Logger: Digital Data Logger
• Brand: Kyoritsu
• Model: KEW 5010
• No. of Channels: Three Channel
• Dimensions: 111(L)x60(W)x42(D)mm
• Display: Digital
• Recording mode: Normal, Trigger, Capture
• Operating system: Successive Approximation (CH1 single synchronized sampling)
• Rated max. working voltage: AC 9.9Vrms, 14V peak value
• Number of input channel: 3ch
• Measuring method: True RMS
• RMS measuring interval: approx. 100ms
• Sampling interval: Normal/Trigger mode : approx. 1.65ms/CH Capture mode : approx. 0.55ms (waveform: at every 1.1ms)
• Low battery warning: Battery mark display (in 4 levels)
• Over-range indication: "OL" mark is displayed when exceeding the measuring range
• Auto power off: Power-off function operates automatically after a switch remains for 3min. (when recording is stopped)
• Possible measurement time: Approx. 10 days (with alkaline LR6 batteries)
• Applicable standards: IEC 61010-1:2001 III 300V Pollution degree2 IEC 61326 (EMC standard)
• Dimensions: 111(L)×60(W)×42(D)mm
• Included Accessories: Alkaline battery LR6×4pcs, 9118 (Carrying case) PC software "KEW LOG Soft 2", 7148 (USB cable) Instruction manual, Quick manual, Install manual, USB Notice sheet
• Optional Accessories: 8146/8147/8148 (Leakage & Load current Clamp Sensor), 8121/8122/8123 (Load current Clamp Sensor), 8129/8130 (Flexible Clamp Sensor), 8320 (AC Adapter), 9135 (Carrying bag), 9119 (Ha

energy logging

Get Price Quote

• Applications: Energy monetization – calculate the fiscal cost of energy waste due to poor power quality,Energy assessment – quantify the before and after installation improvements in energy consumption to justify energy saving devices.

The Fluke 434 II Energy Analyzer is the ideal tool for energy logging. Utilizing the new Energy Loss Calculator function, the 434 II measures the fiscal cost of energy wasted due to poor power quality. This energy monetization capability allows you to identify the most energy-wasteful areas of your facility so you can determine potential energy saving solutions. Add basic power quality measurements to the package and you�re got yourself one powerful troubleshooting tool.

3-CHANNEL DC CURRENT DATALOGGER

Get Price Quote

• Model No.: SD900
• Brand Name: Extech

Extech's SD900 allows technicians to easily monitor and record DC mA values from 3 external sensors, transducers, and other sources using one meter. It also stores the time and date of when readings are taken. The logger features a large triple LCD display and records data on an SD card in an Excel-ready format for easy transfer to a PC for analysis, trending, and archiving. Complete with six AAA batteries, SD memory card, Univeral AC Adaptor with multi-plugs (US, EU, UK, AUS), 3 input connect sockets, and mounting bracket.     Features:   Triple LCD simultaneously displays three DC Current (mA) channelsDatalogger date/time stamps and stores readings on an SD card in Excelformat for easy transfer to a PCSelectable data sampling rate: 2, 5, 10, 30, 60, 120, 300, 600 seconds or AutoComplete with 6 AAA batteries, SD memory card, Universal AC adaptor with multi-plugs (US, EU, UK, AU), 3 input sockets and mounting bracket

Automation Current Data Logger

Get Price Quote

• Voltage: 220-240V
• Parameter to be Monitored: Temperature
• Type of Data Logger: Digital Data Logger
• Display: Digital
• Brand Name: Pulse Automation
• No. of Channels: Single Channel
• Usage: Laboratory
• Frequency: 50 Hz

Current Data Logger

Get Price Quote

In order to provide utmost satisfaction to our clients, we engage in the utilization of quality raw materials and modern machines, for manufacturing these Current Data Loggers. Owing to this, the products' performance is widely acclaimed. In addition, for reasons of quality standardization, we abide by the set industry norms and guidelines. Features    Simple maintenance    High durability    Superior service life

Current Logger

Get Price Quote

Current Logger, Glass LED Display, scrolling displays, Programmable Ammeter

Voltage and Current Loop Loggers

Get Price Quote

Voltage and Current Loop Loggers, Media Preparator

DC Voltage Data Loggers

Get Price Quote

DC Voltage Data Loggers, Frequency Response Analyzer, Gm Counter

Current Datalogger

Get Price Quote

Current Datalogger, rotating vane anemometer

Current Logger

Get Price Quote

Current Logger, production displays, Temperature Monitoring Display

DC Voltage Data Loggers

Get Price Quote

DC Voltage Data Loggers, LSis PLC Programming software services