Deuterium Lamp Dealers

Trigger voltage:>350V Working voltage:80±20V Stablity:preheat for 30 min,and baseline drift=0.002A Noise:Peak=0.001A Service life=1000hours

A 30W Deuterium lamp which is designed with a hole through the middle. The 100W QTH shines through the hole, giving a combined spectrum of the two lamps simultaneously. For many applications, a single Xenon or QTH source will give better results, but for situations where the xenon spectral lines are unacceptable, this gives an alternative. This product includes two stabilized power supplies (to operate the two bulbs), UV to IR transmissive optics, the housing itself and reflectiverefractive optics for UV to IR transmission. Mounting Type : Horizontal

• Packaging Type: Box
• Usage/Application: Laboratory
• Minimum Wavelength: 160 nm

A deuterium lamp uses a tungsten filament and anode placed on opposite sides of a nickel box structure designed to produce the best output spectrum. Unlike an incandescent bulb, the filament is not the source of light in deuterium lamps. Instead an arc is created from the filament to the anode, a similar process to arc lamps. Because the filament must be very hot before it can operate, it is heated for approximately twenty seconds before use. Because the discharge process produces its own heat, the heater is turned down after discharge begins. Although firing voltages are 300 to 500 volts, once the arc is created voltages drop to around 100 to 200 volts. The arc created excites the molecular deuterium contained within the bulb to a higher energy state. The deuterium then emits light as it transitions back to its initial state. This continuous cycle is the origin of the continuous ultraviolet radiation. This process is not the same as the process of decay of atomic excited states (atomic emission), where electrons are excited and then emit radiation. Instead from the molecular emission process, where radiative decay of excited states, in this case of molecular deuterium (D2), causes the effect. Because the lamp operates at high temperatures, normal glass housings cannot be used for a casing (which would also block UV radiation). Instead, a fused quartz, UV glass, or magnesium fluoride envelope is used depending on the specific function of the lamp.

• Country of Origin: Made in India
• Voltage: 220 V
• Power Source: Electric
• Frequency: 50 Hz
• Lighting Type: LED

• Country of Origin: India
• Type: Deuterium Lamp
• Color: Transparent
• Feature: Durable, Light Weight, Quality Tested
• Voltage: 240 V
• Packaging Type: Paper Box, Box
• Brand Name: LC Services
• Compatible Models: Focus, Focus 2000, Focus 2000HR, Focus Detector, Linear, Linear 200, Linear 201, Linear 202, Linear
• Part Number: LI-401
• Frequency: 50 Hz

• Brand Name: Optima
• Voltage: 110-220 V
• Lighting Color: Cool White
• Lighting Type: Halogen
• IP Rating: IP65

• Country of Origin: Made in India
• Application: spare of lamps
• Instrument: Shimadzu
• Item: Deuterium Lamp
• Model: AA700
• Stock: Ready

We are trusted in this industry for exporting, importing, and supplying the premium grade Deuterium Lamps. The Deuterium Lamps, we offer, are designed and developed in compliance with industry norms. We import these Deuterium Lamps from the reliable vendors to maintain the company quality standards. Further, our clients can avail Deuterium Lamps at the most reasonable prices from us.

• Wavelength Range: 180-370 nm
• Lifetime: 2000 hours
• Arc size: 0.5-1 mm

• Type: standard
• Brand Name: HAMAMATSU
• Window Material: UV Glass
• Spectral Distribution: 185 to 400
• Aperture Diameter: 0.5 mm
• Power Supply: C9559, M9521
• Bulb wall temperature: 245 to 290
• Discharge starting voltage (Max): 400 V dc

• Usage/Application: UV VIS Spectroscopy, HPLC
• Apertures: Available with 0.5 and 1.0 mm
• Highest stability: For minimum 2000 hours
• Version: D2 plus
• Required accessories: Quartz envelope, UV glass envelope
• Lighting Color: Blue
• Brand: Heraeus Noblelight, Britelight

• Max noise: 2 to 10 AU
• Aperture diameter: 0.5 to 1 mm
• Spectral Range: 185 to 600nm
• Guaranteed Lifetime: 2000 hour

• Usage/Application: Industrial
• Type: Ultraviolet Spectrophotometer
• Lighting Color: Cool White
• Average life: 1000 hours
• Spectrum Distribution: 160-400 nm

To provide seamless service, we offer a limited range of spares and consumables. For any customisation or spares not mentioned here, please call to check on availability or procurement options.   Deuterium Lamps (from Original Manufacturers or OEMs) Peek Tubings for HPLCs of various dimensions Peek Ferrules for Standard and Shimadzu make systems SS Ferrules SS tubings Belts for HPLC pumps Key pads for various detectors and pumps of different HPLC makes Other spares and consumables Deuterium Lamps (from Original Manufacturers or OEMs) Tungsten Lamp Cuvettes for spectrophotometers For Nitrogen evaporators Front Panel console/Sticker for Biotage type Nitrogen Evaporators Nozzle manifold for Biotage Type Nitrogen Evaporators Heaters Valves

deuterium lamp, Check Valve, needle seat valve, plunger seal, rotor seal