Digital Oscilloscope Dealers

• Oscilloscope: RTH

Bandwidth: 60 MHz to 500 MHz Isolated channels (CAT IV 600 V) Memory Depth: 500 kSample 7” capacitive touch color display 8 in 1: lab oscilloscope, logic analyzer, protocol analyzer, data logger, digital multimeter, spectrum analyzer, harmonics analyzer and frequency counter Wireless LAN remote control

• Brand Name: Aplab
• Bandwidth: Upto 200 MHz
• Channels: Dual
• Usage: Laboratory
• Dimension: 313 (L) x 108 (W) x 142 (H) mm
• Real Time Sample Rate: 20ns

• Application: Hospital Use
• Voltage: 110V, 220V, 3-6VDC, 6-9VDC, 9-12VDC
• Condition: New
• Driven Type: Electric
• Feature: Battery Indicator, Digital Display, Easy To Carry, Highly Competitive, Mercury-free
• Automation Grade: Automatic

We provide Digital Storage Oscilloscope which is a highly advanced scientific instrument. Our Digital Storage Oscilloscope comes with Multilanguage support that makes it very easy to use. Additional qualities include completely digitized display, protective outer cover and correct measurements. Attributes 40-100M bandwidth Dual channels storage High speed screen update 5 automatic measurements Manual cursor measurement Large memory up to 6Kb/CH 250M S/s real-time sample rate on each 4 waveforms and setup parameters saved 250M real-time sample rate for each channel Convenient inserting interface card for RS-232C Hardcopy and USB; 400V (DC+AV peak) max input power

• Roll Range: 500ms/ Div to 50s /Div
• Probe att. Factor: 1X, 5X, 10X, 50X, 100X, 500X, 1000X

Bandwidth : 50MHz No Of Channels : Two Memory Depth : Single channel 16K1MPoint Display : 5.7" TFT (64K Color LCD) Resolution : 320 horizontal ×RGB×234 vertical pixels Sample Modes : Real-Time Sample Equivalent Sample

1、Including 7 measurement functions in one: oscilloscope, waveform generator, multimeter, FFT spectrum analyzer, frequency. counter, protocol analysis, amplitude-frequency curve analysis. 2、350 MHz / 500 MHz oscilloscope bandwidth, 5 GSa/s sample rate. 3、Standard 400MB memory depth. 600,000 wfms/s refresh rate, easy to capture exceptional and low probability events. 4、10.4-inch multi-touch screen. Model MDO 7500 MDO 7500A Channels 2 4 Bandwidth 500MHz 500MHz Rise time 0.7ns 0.7ns Sampling rate(single) 5GSa/s Sampling rate(dual) 2.5GSa/s Sampling rate(four) 1GSa/s Storage depth 400M Input coupling AC,DC,GND Input impedance 1MΩ±2%,and 15pF±5pF paralleling,50Ω±2% Vertical resolution 8 bits Time base range 500ps/div-1000s/div,step by 1-2-5 Trigger mode Auto,normal,single Trigger Edge,video,Pulse,Slope,Runt,Windows,Timeout,Nth Edge,Logic,I2C,SPI,RS232/UART,LIN,CAN Display screen 10.4 inch Touching screen √ Functional generator 50M single channel function generator DMM Optional Display resolution 800×600 Waveform capture rate 600000wfms/s Dimension 422x226x135mm Weight 5kg Operating temperature 0℃- 40℃  

• Brand Name: SIGNET
• Driven Type: Electronics Laboratory Instruments
• Color: Grey
• Condition: New
• Application: Laboratory Use
• Voltage: 220V
• Type: Laboratory Testing Instruments
• Weight: 0-10kg
• Warranty: 1yrs
• Country of Origin: India

Our storage unit is inclusive of all required amenities essential for a safe storage of the products. The unit is supervised by efficient personnel ensuring zero damage to the stored items. Our company is one of the dependable providers of premium range of our product in Chandigarh(India).   70MHz to 200MHz 2 Channel Digital Storage Oscilloscopes - Model D37000A Series  :    200 / 100 / 70MHz Bandwidths 1GSa/s Real Time Sample Rate Trigger Mode : Edge, Pulse Width, Video, Slop, Overtime, Alternative Trigger etc. Provides Software for PC Real-time Analysis Five Math Functions, +, -, *, /, and FFT functions 32 Automatic Measurements and Track Measurement via Cursor Automatically Large (7") Color Display, WVGA (800 x 480) Support U Disk and Local Files Storage Pass / Fail Function Enables to Output Testing Results

• Application: Industrial Use
• Brand Name: Maxtech
• Bandwidth: 20 Mhz
• Channels: Dual
• Usage: Laboratory
• Data Logging Frequency Counter: 1 mV input sensitivity

• MOQ: 1
• Name: DSO
• Name: SIGLENT

• Brand Name: GE
• Pay Mode Terms: T/T (Bank Transfer)
• Usage: Industrial, Laboratory
• Model: GE-DSO-50

• Technical Parameters: Model/Index
• DSO-5100: Bandwidth
• 100MHZ: Channel
• 2 channels+1 ext trig: Real Time Sampling
• 500MSa/s: Equivalent Sampling Rate
• 50GSa/s: Memory Depth
• 32k: Rise time
• <3.5ns: Input Impedance
• 1MΩ||17Pf: Time Base range
• 2.5ns/div-50s/div: Scan- 100ms-50s/div
• Vertical Sensitivity: 2mv-5v/div
• Vertical Resolution: 8bit
• Display: 7″(178mm) color TFT(480*234) LCDv        
• Model/Index: The Specifications Of DSO-5100
• Digital filter: High pass, Low pass, Band pass, Band Stop
• Input coupling: DC, AC, GND
• Input Max voltage: ±400V(DC+AC Pk-Pk), CAT I, CAT II
• Trigger Types: Edge, Pulse, Video, Slope, Alternative
• Trigger Modes: Auto, Normal, Single
• Trigger Source: CH1、CH2、Ext、Ext/5、AC Line
• Save/Recall: Provide two groups reference waveforms, twenty groups capture waveforms and twenty groups setups internal save/recall function and USB flash drive Save/Recall function
• Internal storage: 2 groups of reference waveform, 20 groups of settings, 10 groups of waveforms
• External storage: Bitmap save, CSV save, Waveform save, Setting save
• Sample Types: Real Time, Equivalent Time
• PC software: Can through the computer remote control oscilloscope, extraction waveform analysis data
• 　    Math: +、-、*、Invert
• FFT: Window: Hanning、Hanmming、Blackman、Rectangular
• 　Sampling Points: 1024 points: XY Mode
• Phase Error- ±3 degreesSupport the sampling rate : 5KSa/s～1GSa/s (in a 1-2-5 sequence): Display Model
• Main, Window, Window Zoom, Roll, X-Y: Menu Display
• 2Sec, 5Sec, 10Sec,  20Sec, Infinite: Display Language
• Simplified Chinese, Traditional Chinese, English, Arabic, French, German, Russian, Spanish, Portuguese, Japanese, Korean, Italian: Power Source Voltage
• 100-240VAC、47HZ-440HZ、50VA Max: Connection
• USB Host- Support USB flash drive storageUSB Device- Support PictBridge compatible printers and PC Remote control   RS-232-Support PictBridge compatible printers and PC Remote control Pass/Fail Interface Module: Accessories
• (1:1、10:1)Problex2, EasyScope3.0 Computer Software System, Power Cord, USB cable, User Manual, Easy DsoLib software package: Remark

• Brand Name: Tektronix
• Model Name/Number: TBS2072B
• Bandwidth: 70 MHz
• Usage/Application: Industrial
• Record Length: 5 M
• Sample Rate(Sample/second): 2 GS/s
• Warranty: 5 Years (excluding Accessories)
• Channels: Dual
• Input Impedeance: 1 MOhm 2 %,11.5 pF
• Input Sensitivity: 2 mV/Div to 5 V/Div
• Input Coupling: DC,AC,or GND
• Trigger After Time Range: 20 ns to 8 s
• Vertical Resolution: 8 bits
• Trigger Mode: Auto,Normal,and Single

• Type: Digital Storage Oscilloscope
• Application: Hospital Use
• Feature: Accuracy, Digital Display, Light Weight
• Condition: New
• Country of Origin: India
• Automation Grade: Automatic
• Sampling Rage: 1gsa/sec
• Storage Depth: 25k
• Record Length: Sampling Point of 2 X 521k
• Vertical Deflection: 2mv/div

• Features: Longer service life, Easy to set up, Excellent performance, Low prices .

• Channels: 2CH+1EXT
• Memory Depth: 40Kpts, 5Kpts/CH (SDS1202CNL)
• Interface: USB Device, USB Host, RS-232, Pass/Fail

• Usage: For Graphical View
• Product: Oscilloscope
• MOQ: 1

• Bandwidth: 30 MHz
• Usage/Application: Industrial
• Sample Rate(Sample/second): 125 MSa/s
• Warranty: 1 Year
• Channels: Dual
• Maximum Input Voltage: 25 V

The excellent frequency response the signal amplifiers and the stable triggering abilities from only 5mm peak-to-peak on the screen, enable the scope to display sine waves far beyond Its -3db frequency without any problems. With rectangular signals the instrument's own overshoot is less than 1%. Both scopes contain a second trigger system to ensure stable triggering of asynchronous signal components. Low noise 8 bit flash converters are used to digitize the signals to be analyzed. With memory of 1 Mpt per channel , it gives indepth details for storage and analysis. The well-proven CRT is suitable to reproduce signals with this high horizontal resolution. 2 GS/s allows a clear display of single shot (real time) events. 20 GS/s random sampling is used for repetitive signals. To display variations of a signal over several samples It is recommended to use the envelope or the average mode. Another Important feature is the pre/post trigger function that enables the user to analyze signal components that occur before / after the trigger event. Nie full-size reference memories with 2k points, allow the comparison of signals with those already stored In memory. When the Autoset function is enabled, all relevant parameter settings are performed by the scope's circuitry automatically. The Setup parameters and the measured values are clearly displayed on the screen in alphanumeric characters. Autoset also initiates automatic cursor settings for time and frequency measurement (digital only) as well as voltage measurement. In analog and digital mode, the cursor functions enable the user to analyze a signal while watching the numeric readout for voltage difference, time difference, or frequency values. Another feature is the storage capability for nine complete parameter set ups, which may be stored and recalled simply by pressing the appropriate front panel key. It has a built in calibrator - a 1kHz/1MHz square wave generator. It allows frequent checking of the Instrument's frequency response-from the probe tip to the display on the screen. It also permits high frequency alignment of the probes. Supported by an On Screen Menus adjustments can be performed without opening the scope. With all of the new HAMEG scope range, microprocessors manage the front panel inputs, calculations and other control Functions. In addition, 32bit HISC processors accelerate the digital signal processing. The Instrument may be remotely controlled by any personal computer via its built in serial interface in all relevant functions. A suitable software program is supplied with the scope on delivery.   Features :   Analog 2 x DC to 2000MHz, 2 x 1mV-50V/div Timebase 0.5s/div to 20ns/div Timebase with delay and 2ndTrig. Triggering DC to 250MHz, TV Sync. Separator 1kHz/1MHz Calibrator, CRT with 14kV Digital 2 GS/s Real Time Sampling, 20 GS/s Random Sampling 2 Mpt memory per channel , Memory Zoom up to 100,000:1 Frequency Spectrum display with FFT 2 Channel 1mV - 5 V/cm, TB 2ns - 50s/cm, 4 logic channels(option) Pre/Post Trigger -100% to +400% Math Operations Auto measurements Cursor measurements USB STick and USB/RS232 interface, optional: IEEE488, Ehernet interface

• echnical Parameters: Model/Index
• DSO-5100: Bandwidth
• 100MHZ: Channel
• 2 channels+1 ext trig: Real Time Sampling
• 500MSa/s: Equivalent Sampling Rate
• 50GSa/s: Memory Depth
• 32k: Rise time
• <3.5ns: Input Impedance
• 1MΩ||17Pf: Time Base range
• 2.5ns/div-50s/div: Scan- 100ms-50s/div
• Vertical Sensitivity: 2mv-5v/div
• Vertical Resolution: 8bit
• Display: 7″(178mm) color TFT(480*234) LCDv

• Driven Type: Electric
• Condition: New
• Automation Grade: Automatic
• Application: Hospital Use
• Feature: Accuracy, Easy To Carry
• Country of Origin: India

The OX 9062, OX 9102, OX 9104, and OX 9304 models are versatile oscilloscopes with up to 300 MHz bandwidth, combining oscilloscope, multimeter, analyzer, and recorder modes in one device. Recorded data files are viewable directly on the oscilloscope, streamlining analysis and review. These instruments offer powerful functionality and flexibility, ideal for complex diagnostics and real-time monitoring across a wide range of applications.

• Warranty: 5yrs
• Operating System: For Windows
• Programming Language: Java
• Back Up: Yes
• Language Support: English
• Architecture: 32/64 Bits

Since the origins, CAD systems aim to replace the manual sampling with an accurate paper print.   In order to obtain a proper result, many points have to be taken in consideration as, for example, the dot gain, the color-matching, the simulation of the overlapping tone obtained on wet on wet printing, the raster application to the screen, the color viscosity and the printing order.   Thanks to Color Instinct it is possible to handle all those variables, simulating them on paper or on fabric (direct printing or transfer), and obtaining a level of imitation enough to get the final confirmation from customer and then move to the standard working procedure, from engraving to printing.   It also introduces some working procedure’s improvements: it is possible to make a proper evaluation of the design before engraving, to print and then valuate the proper adjustment, to identify problems related to the engraving or to the printing and then quickly fix them and to increase the number of proposal to the customers. All those options, will reduce the working times and costs. It wont be necessary to produce a large amount of sampling for sales campaign, production will be done only after sales confirmation.

• Oscilloscopes: Digital storage

    Auto scale function •  FFT function •  25MHz～100MHz Bandwidth •Up to 500MS/s real time sample rate •Max.6000 record length for each channel •Dual channels plus External trigger •20 auto measurements •8 inch color LCD display for large view •PC communication through the USB or RS232 port for real-time data transmission •Advanced trigger: Edge trigger, Video trigger and Alternate trigger • Add new function of Trigger Hold off          

• Bandwidth: 25MHz
• Display: 7 Inch Color TFT-LCD Display
• Sampling Rate: 500MSa/Sec
• Channels: 2CH+1EXT
• Memory Depth: 32kpts
• Vertical Sensitivity: 2mV
• Trigger Source: CH1,CH2,Ext,Ext/5,AC Line
• Trigger Type: Edge, Pulse, Video, Slope, Alternative

Features Dual channel, 25MHz analog bandwidthChannel. 100MSas Real-time sample rate of each channel, single collection in analog bandwidth. 25kChannel memory depth. High resolution display system, 320horizontal ×240 vertical pixels Auto-setting. Auto-measure and cursor-measure many kinds of parameter of waveform.

• Brand Name: FNIRSI,FNIRSI
• Type: Digital Oscilloscope
• Application: Educational & Scientific Purpose
• Color: White,White
• Feature: Accuracy, Digital Display, Easy To Carry
• Voltage: 220V
• Condition: New
• Driven Type: Electric
• Country of Origin: China
• Model number: ‎1014D