Direct Acting Solenoid Valve Dealers

• Size: 1/4" INCH
• Material: ALUMINUM
• Number Of Way: 3way
• Connection Type: Threaded
• Flow Rate (Cv): 1.0
• Coil Power Consumption: 5W
• Operation Mode: Normally Closed (NC)
• Voltage (DC): 220V
• Type: 2 Port and 3 Port Normally Closed/Normally Open.
• Manufacturing Range Sizes: 1/8” BSP / ¼” BSP/ ½” BSP
• Orifice: 1.5mm Standard (Other sizes on request.)
• Pressure: 0 to 12 Kg/cm2
• Media: Air, Water &Non Corrosive Liquids &Gases
• Body: Hard Anodized Aluminium Body, Brass &stainless steel Against Specific Orders
• Manual Overdrive: Optional
• Data: Epoxy Molded, Water Proof, Continuous Duty Coils, 6 to 230 V AC &9.5 Watts Low Watts as per request

• Brand Name: M & M Italy
• Media: Steam
• Model: D263dlh, 0-10 Bar
• conncetion: 1/4
• Media Tempature: -10*c.......+180*c
• Ambient Tempature: -10*c........+70*c
• Body Material: Brass (cw617n En12165)
• Orifice Material: Stainless Steel(aisi 303 En 1088-3)
• Operator Material: stainless Steel
• Coil Power: Ac18va (holding), Ac 36va (inrush), Dc14 W
• weight: 0.26kg

• Size: 1.1/2inch, 1.1/4inch, 3/4inch
• Material: Stainless Steel
• Certification: ISI Certified
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Automatic Grade: Automatic
• Number Of Way: 2way, 3way
• Pressure: High, Low, Medium

• Material: Mild Steel
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Size: All Sizes
• Feature: Casting Approved, Durable, Investment Casting
• Country of Origin: India
• Pressure: High, Low, Medium
• Pattern: Plain
• Type: Direct Acting Solenoid Valve

The Direct Acting Solenoid Valve by SAMSON are easy to install by directly mounting in any position. The solenoid is able to revolve in full 360? and is noiseless in performance.

• Size: available in all standard sizes
• Material: standard AL body with hardning,Aluminium
• Number Of Way: available in all standard
• Connection Type: mounting as per satndard
• Flow Rate (Cv): varies as per the the product
• Coil Power Consumption: 5W
• Operation Mode: available in all standard
• Voltage (DC): 24V and 230v both available
• Brand Name: Mercury Pneumatics
• Type: Solonoide v/v

• Country of Origin: India
• Size: 1/4"
• Material: Aluminium
• Number Of Way: 3/2 Way
• Brand Name: AIRMAX
• Type: Direct Acting Solenoid Valve
• Pressure: Low
• Media: Air
• Port Size: 1/4"
• Temperature Of Media: Normal

• Size: 1/4 Inch
• Type: 2 Way
• Body: Aluminium / SS304 / Optional CF8, CF8M
• Seals: Nitrile, Optional, EPDM, VITON, Silcon
• Pressure: 2 to 10 Bar
• Voltage: 220V AC / 24V DC / 110V AC /12V DC
• Temperature: 80 Degree C Maximum
• Media: Water /Oil / Steam / Air /Gas / Chemical
• Ends Connection: Screwed BSP (F)

• Material: Carbon Steeel, PVC
• Application: Gas Fitting
• Feature: Casting Approved
• Number Of Way: 2way, 4way
• Pressure: High

In a direct acting solenoid valve, a coil magnetically opens the valve in a direct action, lifting the shaft and the seat of the valve without depending on outside pressure.

• Brand Name: ROTEX
• BRASS: SS-316

We are offering direct acting high pressure solenoid valve, 2 direct acting high pressure solenoid valve. features: bubble tight shut off mounts in any position vibration resistance up to 9g suitable for high speed cycling speed up to 300 cycles min life >2 million cycles ambient and fluid temperature -20 °c to 80 °c media air, inert gases, water, vacuum, free flowing liquids, oil, diesel, kerosene, lpg, cng application: fuel gas cutoff type pressure 20116 0-400 bar.

• Size :: 1/4"
• Presssure :: 0 to 10kg
• Media :: Air
• Voltage: All std. Voltage Available

3 Way Direct Acting Solenoid Valve

We are considered as a paramount direct acting solenoid valve manufacturer, exporter and supplier in the international market. We supply direct acting solenoid which is fabricated with quality material. Fulfilling the needs of various industries, the direct acting solenoid is also known as 2/2 & 3/2 direct acting solenoid valve. the direct acting solenoids are obtainable at rock bottom prices.

• Port Size: 1/2″ BSP / NPT
• Body Material: Aluminum / Brass / SS-304 / SS-316
• Type: 2 Port, 2 Posion (NC/NO)
• Circumference Temperature: -10 °C to 95 °C
• Media Temperature: -10 °C to 250 °C
• Operating Voltage: AC : 230V, 110V, 48V, 42V, 24V. DC : 12V, 24V
• Power Consumption: AC : 8W, 12W, 17W. DC : 8W
• Media: Air, Water, Gas, Light Oil, Vacuum Hot, Oil, Steam

• Application: Analyzer and Dispensing
• Model: 20270
• Pressure Range: 0-20 Bar
• Orifice Size: 1.2,1.8, 2.5, 3, 3.5mm
•  :  

• Feature: Seat valve, direct-acting , Port connection size up to G 1/2

This direct-acting plunger solenoid valve Type 0256 can be used in many ways. It is delivered with brass or stainless steel bodies for a wide range of orifices and connections.

2 Way Directional control valve suitable for Air and Fluid medium in food industries, Pharmaceutical industries, Chemical application and highly corrosive environment and also it is protected with flame and weather proof enclosure

• Body Construction: Brass Forged /Aluminum/I.C./S.S.304
• Seat: Viton
• Temperature of fluid: -5℃ to 85℃ (high temperature on request)
• Coil Voltage: 12V, 24V, 48V, 110V, 220V,AC/DC
• Media: Air/Gas/Oil/Water/Chemical

Jameel Trading Company provides variety of Direct Acting Type Solenoid Valve, these type of valves are known for theirdurability and long lasting life so it is prefered by clients all over the world.  

2 way and 3 way direct acting solenoid valves are generally used for operating midget cylinders Or for remote control of main valve. The valves are suitable for air, water, light oil and are also Be selected in G25 (4W6.5 VA) and G50 (8W14.5 VA) coil versions. The G50 range valves Are also offered with flame proof coil class I, IIA, IIB, as per IS 2148.