Direction Control Valve Dealers

• Packaging Type: Box
• Brand Name: Airmatic
• Max Operating Temperature: 50 Degree C
• Body Material: Aluminium Optional Brass
• Usage: Industrial
• Maximum Operating Pressure: 8 Kg/cm2
• Minimum Pilot Pressure: 2 kg/cm2
• Minimum Operating Pressure: 1.5 Kg/cm2 g

Direction Control Valves offered comprise high operation based directional control valve that make use of solenoid for pulling spool as well as in changing direction of hydraulic oil. Allowing for direct control of flow, these can also be used as pilot-operated valve used in operating other valves. Some of its features include made available in a wide range of operational choices, valves developed as per international quality standards, choice of different sizes, designs and specifications, sturdy construction finish, available as per OEM specifications as demanded by the customers.   Specifications: Sturdy construction Light weight Flawless finish

• Brand Name: Polyhydron
• I Deal In: New Only
• Operating Pressure: 0.42, 0.49,0.56 kg/cm2
• Operating Tolerance: 0.1 kg/cm2
• Operating Temperature: 0 to 100 deg C
• Port Operating: Nominal 70 mm

Features: Direct operated pressure relief valve. Guided poppet design. Cushion arrangement for greater stability and noise control.

Radial piston pumps (fixed displacement) are used especially for high pressure and relatively small flows. Pressures of up to 650 bar are normal. These kinds of piston pumps are characterized by the following advantages: • High efficiency • High pressure (up to 1000 bar) • Low flow and pressure ripple (due to the small dead volume in the workspace of the pumping piston) • Low noise level • Very high load at lowest speed due to the hydrostatically balanced parts possible • No axial internal forces at the drive shaft bearing • High reliability

• Material: Metal
• Feature: Casting Approved, Durable
• Number Of Way: 2way, 3way, 4way
• Automatic Grade: Manual
• Pack Type: Box
• Other Name: Mobile Valve / Hand Lever Valve

Directional Control Valves (DCVs) Are One of The Most Fundamental Parts of Hydraulic and Pneumatic Systems. DCVs Allow Fluid Flow (hydraulic oil, water or air) Into Different Paths From One or More Sources

BRN - Double spool double action directional control valve

Hydraulic Pump: - Yuken. We provide Tool kit with our machinery Electric Motor: - 10 Hp Cromton We provide our electrical & hydraulic manual. Pressure relief valve: - polyhydron. Hydraulic valve: - Yuken Plc based panel board with screen display. Safety sensor. : - PDF. Working sensor: - PDF. We Use Pu seal in our entire hydraulic cylinder

Seat type modular valve. Intended for by - passing. Pressure control valve,Pressure reducing valve etc. to achieve reverse free flow condition.Allow free flow from port A to port B or from port B to port A ( see model code ) and offer leakage free closure in opposite direction. Available in four sizes of standard interfaces conforming to ISO 5781, DIN 24340 or IS 10187 Each model available with options of four cracking pressures : 0.5, 1.5, 3 and 5 bar.

• Brand Name: Tokyo Keiki Tokimec
• Media: Oil
• Size: Standard
• Pressure: 350 bar
• Automation Grade: Automatic
• Max. Flow: 160 lpm

Electropneumatics makes pneumatic valves suitable for compressed air, water, vacuum, gases and low pressure oil. They are available as solenoid-operated, pneumatically-operated and manually-operated. Solenoid coils are available for AC and DC voltages. The valve range consists of Directional control valves- 2, 3, 4-way, 2, 3-position, singledouble solenoid, directpilot pneumatically manually operated, Flow control, check and needle valves, Quick exhaust valves, Shuttle valves, Rotor seal couplings, Dual sensing valves, Rotary actuators, Stackable valves- 2, 3, 4-way, 2, 3-position, singledouble solenoid, Accessories like silencers, mufflers, air preparation units

• Material: Aluminium, Brass, and stainless steel
• Applications: Hydraulic machinery, pneumatic machinery
• Function: Allow fluid flow into different paths from one or more sources
• Maximum flow rate: Up to 650 l/m
• Durability: Long Life
• Size range: 25mm to 100mm
• Note: We provide repairing services also

Our Direction Control Valves accounts for having the maximum flow rate up to 650 l/m and are available in 25mm to 100mm size range. The Control Valves are available in metals such as Aluminium, Brass, and stainless steel.

Newton Direction Control Valves are used to actuate Air Cylinders and are available with various Actuator Mechanisms in 1/4", 3/8" & 1/2" BSP / NPT Ports. We have extensive experience in Import Substitution and developing Air Cylinders and DC Valves and have earned customers’ constant trust...

Directional control valves are one of the most fundamental parts in hydraulic machinery as well and pneumatic machinery. They allow fluid flow into different paths from one or more sources. They usually consist of a spool inside a cylinder which is mechanically or electrically controlled. The movement of the spool restricts or permits the flow, thus it controls the fluid flow. The spool (sliding type) consists of lands and grooves.The lands block oil flow through the valve body. The grooves allow oil or gas to flow around the spool and through the valve body. There are two fundamental positions of directional control valve namely normal position where valve returns on removal of actuating force and other is working position which is position of a valve when actuating force is applied. There is another class of valves with 3 or more position that can be spring centered with 2 working position and a normal position.   Directional control valves can be classified according to- Number of ports Number of positions Actuating methods Type of spool. Example: A 5/2 directional control valve would have five ports and two spool positions.

  Five chamber design for better reduction in dynamic forces and longer valve life. Available as spring centered, spring off-set or detented model. Operating head can be rotated by 90° x 4 around spool axis for flexibility in mounting. Valve mounting interface conforms to ISO 4401-03-02. Five chamber body and spool design provides low-pressure drop, with maximum performance.