Disc Pulverizer Dealers

Our pulverizing systems, are high capacity systems for the profitable pulverizing of thermoplastic and other heat sensitive materials such as LDPE, LLDPE, MDPE and HDPE, as well as other heat sensitive thermoplastics such as PP and EVA without the added cooling of nitrogen.

• Plate Size: 10",12",14"

Disc pulverisers or crushers have two roughened graded cast iron plates. One plate is stationary and the other one rotates. Grain feed between the plates is crushed and sheared. Type and spacing of plates determines fineness of the feed. These mills are better adapted to grinding coarse grains than hammer mills. However, they will not handle high moisture grain satisfactorily because of low capacity. Jas Disc type grinding mills (bullet) flour mill machines are manufactured by the company with high tech professional and updated technical needful and up to the satisfaction of the customers.

• CIRCULAR VIBRATORY SCREEN: 1.5 HP
• OUT PUT POWDER SIZE: 20-40 MESH

Infeed hoper from ss 304(optional), Infeed screw to pulverizer chamber controls the infeed material in grinding chamber. The screw stops at 85% full load of main motor. The screw starts when the motor load decreases to 75%,Water cooling is provided to fix serration plate & bearing housing. The serrated grinding discsserrated segments(Round serrated disc in 6 to 8 pcs.) are from high chrome material duly hardened. We recommend use of segments over the use dics. The advantage of using segments over the disc is that wobbling can be controlled within 0.3 mm in face.(In our model plvr 450). This results in more production & wear out of segments in 23mm so that it can be resharpened for three times, HEAVY DUTY 'C' class of bearings are used in bearing housing. Bearing housing is from ms casting or from graded casting, The gap setting is done by inserting feeler gauge between fix & rotary serration segments from outside of the chamber,thus reducing down time, The gap setting is done by inserting feeler gauge between fix & rotary serration segments from outside of the chamber,thus reducing down time.

• FEEDER SCREW HP: 1/2 HP
• SERRATED DISC DIAMETER: 450MM

Infeed screw to pulverizer chamber controls the infeed material in grinding chamber. The screw stops at 85% full load of main motor. The screw starts when the motor load decreases to 75%, The serrated grinding discsserrated segments(Round serrated disc in 6 to 8 pcs.) are from high chrome material duly hardened. We recommend use of segments over the use dics. The advantage of using segments over the disc is that wobbling can be controlled within 0.3 mm in face.(In our model plvr 450). This results in more production & wear out of segments in 23mm so that it can be resharpened for three times.Water cooling is provided to fix serration plate & bearing housing.

• Usage/Application: Industrial
• Number of Disc: 2
• Material: Mild Steel
• Disc Diameter (mm): 12''
• Total Weight Approx (kg): 150 to 200 kg
• Size: 12'' Disc Type
• I Deal in: New Only

• Material: Mild Steel
• Product Type: Disc Type PVC Pulverizer
• Usage/Application: Grinding
• Motor Type: 40 HP
• Model Name/Number: RCIDP150

• Model (Pin Mill): PPI-1
• Model (Disc Pulverizer): PDC-1
• Pulverizer Chamber Size: 375 x 75

These Pulverizers are suitable where the material is fibrous or needs more of the friction to break the particles. Three are suitable where the feed particles are in small granule size.The feeding is from the center of the rotating disk.The output may be collected directly below the machine or with the help of suction fan and cyclone.

Disc Pulverizer, Concentrator Separator, Magnetic Sheet Fanners

Disc Pulverize, potters wheel, Pot Mill

Disc Pulverizer, Rotomolding Rotational Moulding Machine, Cast Aluminum Molds

disc pulveriser, size reduction machineries, ultra turbo mill machinery