Discharge Rod Dealers

• Material: Fiberglass
• Discharge Range: 11KV - 440KV
• Voltage: 11Kv - 440 Kv
• Payment Terms: T/T (Bank Transfer)

• Material: Copper Layer and Steel Core
• Length: 1.2m
• Condition: Good
• Feature: Discharge Head Fitted in the Discharge Rod, Special Waterproof Carrying Cases
• Tensile Strength: >=580Nm/mm
• Diameter: 14.2mm

• Application: In High Voltage Applications
• Type: Non Linear Carbon Type
• Features: Highly Durable, Optimum Strength
• Cable Type: Flexible Copper Cable
• Use: Industrial
• Finishing: Polished

Non linear carbon discharge resistor type discharge rods are used to discharge dead system having limited fault levels and also to discharge the static & induced charges in the dead system or equipment, particularly in transmission lines, cables, transformers, reactors, large bus bar systems, switch-gears etc. the earthing lead is made up of special highly flexible braided copper cable with transparent sheath. copper hook of 4” dia of ½” thick copper rod & earth end clamp of special alloy are provided. Maininsulation : 'f' classto is, bs & iecs pecifications For dimensions of insulated rods please refer specifications of insulated sticks in the beginning of electrical safety.   Features Discharge head fitted in the discharge rod Extension handles to extend the length 4" dia copper hook for bus bars Special waterproof carrying cases Theory for controlled discharging When discharging inductive apparatus (transformers, reactors etc.) controlled discharging must be used. we provide non linear carbon discharge resistor for this purpose which prevents the lightning impulses appearing across the equipment being discharged. while discharging inductive loads the emf induced across the object is directly proportional to rate of change of flux i.e.   Since l (inductance) is usually large and the discharging takes place in microseconds, a huge impulse voltage resembling a 1.2/50 μsec pulse appears across the object (a typical waveform is shown in fig), thus subjecting the equipment under discharging to a lightning impulse voltage.   To overcome this non linear carbon discharge resistor is employed. the reverse temperature coefficient of carbon facilitates controlled discharging. as the current flows through the carbon resistance, this increases the temperature and by virtue of reverse temperature coefficient, the resistance falls. therefore as the current is flowing, voltage is reducing and since resistance is also reducing acontrolled discharging takes place.   The do fuse operating rods has and innovative design for fitting, removing & changing drop out fuses. the do fuse. operating rods has a spring loaded fuse jaw which accepts the do fuses easily and ensures that it does not fall while fitting or removing. the entire operation is carried out from ground level comfortably.   This method saves considerable amount of time and effort for fuse replacement and provides extremely safe procedure as compared to the conventional procedures.

Electrical overhead corporation is a one of the trusted suppliers of operating rod and discharging rod in gujarat. Operating rods are available in all size as per customers requirment

ARC Insulations is one of the leading manufacturer and supplier of fiberglass earthing discharge rod. Our discharging rod is made of epoxy resin and boron free fiberglass roving pultrusion tubes, which are safe for exposing the worker to a large risk of electric shock. Our hot sticks are manufactured from the highest grade electrical rated fiberglass and meet or exceed all applicable industry performance criteria including ASTM F711, ASTM F1826, and OSHA 1926.951(d).or IEC 60060 and IS 2071 part. Application : ARC Earthing discharge rod is designed to protect people working at de-energized overhead lines or bus bar. This unique product provides 100% safety, against an unexpected return of power on network. By attaching different tools to the end of the hot stick, a worker can use discharge rod for below applications,   Test for voltage Tighten nuts and bolts Brush items Prune foliage Prune foliage Connect tie wires Install insulating sleeves Disconnect switches Replace cutout tubes and reclose Remove pole covers Replace bulbs And complete many other overhead tasks   Electrically Insulated Telescoping Tools have maximum convenience for the linemen because they permit them to perform many routine jobs from ground level. Specification :   Fiber glass discharge rod manufactured from high quality epoxy resin. Products manufactured in automatic pultrusion plant,  hence, strong and sturdy. Super smooth glossy finish prevents moisture. Excellent dielectric strength. Unique Telescopic design easy to assemble & easy to operate. Equipped with FRP/Rubber insulator to increase creepage distance. Bottom provided with slip resistance rubber grip. Canvas cover bag for protection of equipment. Tested as per IS & IEC standard.  

We are main supplier of this product.

• Country of Origin: India
• Material: Mild Steel
• Size: 10-20 Foot
• Weight: 10-20 Kilograms (kg)
• Supply Ability: 1 Unit Per Day

Key Features Durability High strength Compact design Light in weight Specifications Rods can be used for KV test level Special pultruded fiber glass Rods are used for proper insulation and long life 3 Mtr. Long (Dismentable) (Additional lengths are also available) 5 Mtr. Earthing lead with proper clamps Non-Inductive Resistor to drain the high voltage smoothly which enables the pitting on the test piece and corona discharge Waterproof bag is provided Very light in weight and workable in all weather conditions.

• Material: Pultrusion fiber glass
• Weight: 1.65 kg
• Voltage: 11 kV
• Damping Resistor: 10 K Ohm
• Max Capacity discharge: 6 MFD
• Dimensions: 32mm Dia x 750mm Length
• Operating Temperature: 0 deg C to 55 deg C
• Storage Temperature: - 5 deg C to 60 deg C

• Type: Discharging Rod
• Material: Frp
• Length: Standard
• Application: Industrial Use
• Color: Yellow
• Feature: Adjustable

FRP GRP Pultruded Fiberglass Operating rod and FRP GRP Pultruded Fiberglass Discharge Rods.High Insulation- Tested as per IS2071(part 1) 1993 RA 1999 for power frequency and Lighting Impulse voltage under dry and wet conditions,Infinite height adjustment between minimum and maximum length

• Material: Glassfiber
• Application: In High Voltage Applications
• Size: 4 Mtr To 20 Mtr
• Length of Pipe: 1200mm
• Features: Highly Durable, Optimum Strength, Corrosion Resistance
• Cable Type: Flexible Copper Cable

we are offering frp discharging rod. frp discharging rod telescopic type 4 setcions

Suitable for high wind velocity areas & high temperature withstand capacity. Light weight allows one person to handle the rod easily from ground leveltower cross arm.Discharge upto 800 kv system.tested as per IEC-61235

• Technology: Pultrusion

• Diameter: 4”
• thickness: ½”

Non Linear Carbon Discharge Resistor Type Discharge Rods are used to discharge dead system having limited fault levels and also to discharge the static & induced charges in the dead system or equipment, particularly in transmission lines, cables, transformers, reactors, large bus bar systems, switch-gears etc. The earthing lead is made up of special highly flexible braided copper cable with transparent sheath. Copper Hook of 4� dia of ½� thick copper rod & Earth End Clamp of special alloy are provided.

• Thickness: ½”
• Single Piece Length: 5- 18 Feet
• Discharge Range: 11 To 33 Kv
• Voltage: 11kv to 132 Kv
• Use: Industrial
• Finishing: Polished

• Material: FRP Pultruded
• Country of Origin: Made in India
• Item Code: 8543
• Shape: Round
• Discharge Range: 11 to 33 Kv
• Size: 3 Section 15 Feet Long 11KV/ 33KV
• Voltage: 11 / 22/ 33/132 - 220 KV
• Brand Name: TRANSPOWER MAKE
• Dia: 45 mm
• Assembled Length: 6- 18 FEET
• Glass Content: 65 %
• Top Section Dia: 25 mm

• Material: FRP
• Application: Overhead Lining
• Length: 1200mm

Buyers can stay rest assured with us for their orders as we ensure zero damage to the products that we deliver. For this, we store the entire lot in a spacious warehouse till the final dispatch. As we are the name on which the customers lay their trust for quality, as we are supplying the finest Discharge Rods.

• Brand Name: Rudra
• Color: Yellow
• Country of Origin: India

Heavy duty discharge rod

• Diameter: 25 Mm
• Single Piece Length: 5- 18 Feet
• Discharge Range: 11 To 33 Kv
• Voltage: 400 KV
• Rubber Hand Grip: Yes
• Yes: 1-2 m

Be it any place or time; we make on time deliveries of the goods to the customers. To protect our products from being damaged during transit/ handling, we use industrial grade packaging materials. Furthermore, we ensure the packs are appealing for marketing purposes.

• Brand Name: RELCO
• Material: FRP
• Country of Origin: Made in India
• I Deal In: New Only
• Voltage: upto 132 kV
• Rubber Hand Grip: Yes

• Size: 18 ft
• Material: FRP
• Discharge Range (Kv): 11 KV to 400 KV
• Brand: JK Invento
• Product Type: Discharge rod
• Rubber Hand Grip: Yes