Double Cartridge Seals Dealers

• Seal Faces: Ceramic /Sic/Carbon Vs Ceramic /RB Sic./TC
• Metal Components: SS-316
• Secondary Seals: Viton/PTFE/GFT
• Shaft Dia.: 25 to 150mm
• Pressure: Up to 15 Bars
• Temp.: -50 to 180°C

DOUBLE Cartridge Seal :  We are providing our customers a wide range of Double Cartridge Seals. These cartridge seals are widely finds its applications in various industrial sectors.   SSI-50DMC Double Cartridge seals are self-contained units consisting of a shaft sleeve, seal, and gland plate. The unit is fitted onto the pump shaft as a built assembly, and no further fitting is required.  Double Cartridge seals are an attempt to over-come the fitting problems of conventional seal, They are supplied in double form, and the gland plate is often fitted with various tapping to provide for flushing, cooling water injection, and disaster control.   The cartridge can overcome several limitations of the standard pump gland. Tangential tapping for introducing fluids into the gland cause less  disturbance to the seal face than the radial tapping often found on pump units. Look again at the tapping provided for flush water to the packed gland, a tangential tapping would provide a less turbulent water source. For a packing gland this may not be important but to a mechanical seal it can be another adverse condition with which to cope.   The setting position of the seal is set by the cartridge design, but the seal unit should not be screwed to the shaft until the gland plate is secured to the pump and any adjustments made to the shaft position. Once this has been completed the set screws can be tightened and the spacers removed.   So, what can go wrong. The design works to eliminate many of the common causes of seal failure on installation and because the seal is presented on its own shaft sleeve any damage that might be caused by a conventional seal to the pump unit is also eliminated.   Materials : Seal Faces : Ceramic /Sic/Carbon Vs Ceramic /RB Sic./TC Secondary Seals : Viton/PTFE/GFT Metal Components : SS-316   Operating Condition: Shaft Dia. : 25 to 150mm Pressure :up to 15 Bars Temp. : -50 to 180°C

• Finishing: Polished
• Material Grade: S316 and S16l
• Shape: Round
• Color: Silver
• Specialities: Good Quality, Fine Finish
• Country of Origin: India
• Applications: Chemical, Pharmaceuticals, Oil, Bulk Drugs & Polymer Industires
• Face Materials: Tungsten Carbide, Carbon, Silicon Carbide, Ceramic
• Secondary Seal: Viton, EPDM, Silicon, Grafoil, PTFE, FFKM, Aflas
• Pressure: Up to 10 bar
• Temperature: -20 C to -200 C
• Speed: Rpm Subject to Specification

• Material: Steel
• Finishing: Polished
• Shape: Round
• Color: Grey
• Usage: Industrial
• Certification: ISI Certified
• Type: Double Cartridge
• Country of Origin: India

• Country of Origin: India
• Type: Industrial Seals
• Brand Name: MATOS
• Certification: ISO 9001:2015
• Sealing Type: Mechanical
• Chemical Resistance: Yes
• Condition: New
• Specialities: Easy To Install
• Pressure: Up to 10 Bars
• Temperature: -20 Deg C to 150 Deg C
• Rotary Face: Carbon, Sic, Ceramic, Tc
• Stationary Face: Carbon, Sic, Ceramic, Tc
• Elastomers: Viton, Silicon, Nitrile, Ptfe
• Springs and Retainers: Ss 304,Ss 316 & Titanium

• Material: Mild Steel
• Finishing: Polished
• Shape: Round
• Color: Silver
• Packaging Type: Packet
• Pressure: Full vacuum to 40 bar
• Temperature: -40˚C to 260˚C
• Speed: Subject to specification

DOUBLE CARTRIDGE SEAL Double Cartridge seal are special purpose multi spring Balanced Mechanical Seal designed for abrasive and corrosive media. Independent of direction of rotation. Easy installation because of Cartridge construction. Rugged design improves operating life.   Industrial Application: Pulp & Paper Industries, Petrochemical, Refinery.   Face Materials: Tungsten Carbide, Carbon, Silicon Carbide, Ceramic.   Metal Component: S.S 316, S.S 316L, Alloy 20, Hastelloy C.   Secondary Seal: Viton, PTFE, GFT, FKM, EPDM.   Operating Limits: Pressure : Full vacuum to 40 bar Temperature : -40˚C to 260˚C Speed : Subject to specification.

• Brand Name: Jain Seals
• Material: Steel
• Finishing: Polished
• Material Grade: SS316
• Shape: Round
• Condition: New
• Certification: ISO 9001:2008 Certified
• Packaging Type: Carton Box
• Working Pressure: Upto 15 Bar
• Sealing Type: Multi Spring
• Specialities: Heat Resistant, Good Quality, Easy To Install
• Type: Double Cartridge Seals
• Working Temperature: Upto 15 Bar
• Country of Origin: India
• Available Range: 25 To 150 Mm
• Chemical Resistance: Yes
• Pressure (Bar): 15 Bar
• Shaft Speed in RPM: Upton 4000 Rpm

• Type: Industrial Seals
• Shape: Round
• Material: Cast Iron
• Usage: Industrial
• Specialities: Unbreakable, Heat Resistant, Good Quality
• Packaging Type: Carton Box
• Seal Width: 10mm
• Thickness: 10-20mm
• Seal Length: 100mm

• Material: Stainless Steel
• Finishing: Polished
• Usage: Industrial Use
• Packaging Type: Carton Box
• Sealing Type: Mechanical
• Specialities: Unbreakable, Good Quality
• Warranty: 1 Year
• Country of Origin: India

Maximum sealing safety is guaranteed by the design of this double semi cartridge seal. This basically eliminates the possibility of fluid or gas leaking out of pumps or mixers. It offers a degree of safety and emissions compliance with zero emissions that is not feasible with single seals. When blending a hazardous or lethal chemical, this double semi cartridge seal is crucial. Additionally, this mark is required in several nations for specific uses. Companies are using it more frequently now to satisfy strict environmental objectives or emissions standards.

• Seal Size: 025 to 0100
• Temperature Limit: -20° C to 180° C
• Pressure Limit: Up to 15 kg
• Seal Faces: Carbon, Sic, TC
• O Rings: Viton, PTFE
• Material of Constructions: SS316, SS304
• Application: Slurry, Viscous Liquid, Solidifying Liquids
• Features: Cartridge and Factory Assembled, Bidirectional

• Country of Origin: India
• Type: Double Cartridge Mechanical Seal
• Certification: ISO 9001:2008 Certified
• Shape: Round
• Size: Up to 500 mm
• Faces Material: Carbon, Silicon, Tungsten Carbide
• Elastomer: Nitrile, NBR, Viton, EPDM, Aflas, Karlee, TCV, GFT, PTFE, FEP
• Hardware M.O.C: SS304, SS316, Hast-C, Alloy-20
• Pressure: Up to 10 bar
• Temperature: -50° to 250° C
• Suitable Speed: Up to 4000 Rpm

• Brand Name: Etannor
• Material: Stainless Steel
• Finishing: Polished
• Shape: Round
• Specialities: Good Quality, Easy To Install
• Country of Origin: India
• Usage: Used in Pump & Mixers

Dual cartridge seals, also referred to as double cartridge seals, are the answer for applications where a second level of protection is needed due to risks to the environment or operating equipment. Etannor offers a variety of models that are easy to install while also complying with environmental regulations and ANSI standards. A variety of configurations are available depending on the application and operating conditions.   Features and Benefits: Dual seal Cartridge Balanced Independent of direction of rotation Double pressure balanced Integrated pumping device

• Certification: ISI Certified, ISO 9001:2008 Certified
• Pressure: Up To 55 Bars
• Faces Material: Silicon Carbide, Tungsten Carbide, Stallite, Cr. Steel, Carbon, Ceramic
• Elastomers Material: Viton, Aflas, Chemraz, Kalrez, Hiflour, T.V, NBR, EPDM, PTFE, EncapsulatedGFT, FFKM, TRP & Other
• Parts Material: S.S.304, S.S. 316, 904L, Hastalloy-C, Alloy-20, Titanium, C-276 & Monel
• Diameter: Up To 150mm
• Temperature: Up To +300° C
• Velocity: Up To 25 M/S
• Pressure: Up To 55 Bars

ApplicationApplied In Sealing High Corrosion Media, Alcohol Processing Industries, Pulp And Paper Industries, Petrochemical Plants, Nuclear Plants, Mixers, Steel Making Plants, Biochemistry, Petroleum Refineries, Oil Refineries, General Chemicals, Light Hydrocarbons, Foodstuff Processing, Chemical Processing, Pharmaceuticals, Power Generation, Main Oil Pipeline Pumps, Chemical Process Pumps , High Pressure Pumps, Water Injection Pumps, Boiler Feed Water Pumps, Sludge & Syrup Pumps, Vertical Pumps, Sewage Treatment Systems,  Wastewater Treatment, Clinker Grinders, Paint, Abrasive Liquid In Grinding Mills And General Rotary Equipments.

• Material: Cold Rolled Steel
• Finishing: Polished
• Shape: Round
• Type: Industrial Seals
• Country of Origin: India
• Specialities: Dual seal, Available for standard (eCartex-ASDN) and big bore (eCartex-ABDN) seal chambers, Cartridge, Balanced, Independent of direction of rotation, Double pressure balanced, Integrated pumping device
• Advantages: Up to 80 % less energy consumption and minimized heat generation of seal due to friction-reducing Di
• Operating Range: Advantages Shaft diameter: d1 = 25 ... 100 mm (1.000" ... 4.000") Other sizes on request, Temperatur

Materials  Seal face product side: Silicon carbide DiamondFace® (Q15)  Seat product side: Silicon carbide DiamondFace® (Q15)  Seal face atmospheric side: Carbon graphite resin impregnated (B)  Seat atmospheric side: Silicon carbide (Q1)  Secondary seals: FKM (V), EPDM (E), FFKM (K), Perfluorcarbon rubber/PTFE (U1)  Springs: Hastelloy® C-4 (M)  Metal parts: CrNiMo steel (G), CrNiMo cast steel (G)   Recommended Applications  Process industry  Petrochemical industry  Chemical industry  Pharmaceutical industry  Power plant technology  Pulp and paper industry  Water and waste water technology  Mining industry  Food and beverage industry  Universally applicable  ANSI process pumps