Drilling Rig Dealers

• Application: Industrial
• Material: Steel
• Drilling Rig Types: Hydraulic Piling Rigs
• Brand Name: Ashok
• Drill Size: 300 mm upto 3000 Mm
• Finish: Powder Coated

• Brand Name: DTH
• Condition: New
• Automatic Grade: Manual
• Type: Electric Drill
• Drilling depth: 1000 M
• Drilling Rig Type: RRS
• Capacity: 500-1000 Feet

• Country of Origin: India
• Drilling Diameter: 4.5
• Formation / Strata: Soft / Medium / Hard
• Prime Mover of Hydraulic Pumps: Power Take Off from Deck Engine
• Carrier / Mounting: Crawler
• Compressor: Suitable Compressor Elgi / Atlas Copco / Ir (the Compressor Shall Be Mounted On a Separate Trolley)
• Maximum Operating Pressure: 180 Kg/Cm2
• Mast Capacity (wt): 8 Tons
• Mast Capacity (rod Handling): 10 Feet (3.0 Mtrs)
• Mast Height: 5.0mtrs
• Centralizer Opening: 8
• Pull Up Speed: 12 Mtr/Min
• Pull Down Speed: 12 Mtr/Min
• Pull Up Force: 2300 Kgfm
• Pull Down Force: 2300 Kgfm
• Rotation Speed: 0-80
• Rotary Head Torque: 120 Kgm
• Under Carriage Speed: 2.0 Kmph
• Under Carriage Grad Ability: 30degree
• Under Carriage Drive: Independent Hydraulic Motor for Each Track
• Dimensions Overall Length: 5400 (17' 8
• Overall Width: 2,200mm (7' 2
• Overall Height: 2,400mm (7' 9
• Total Weight: 4,600kgs (10120 lb)
•  :  

• Driven Type: Hydraulic
• Condition: New & Refurbished
• Application: Water Well Drilling & Pilling
• Type: Water Well Drilling Rigs
• Country of Origin: India
• Brand Name: McDrill
• Warranty: 1 YEAR
• DTH Drilling Maximum Diameter: 4 Inch to 10 Inch (101 mm to 254 mm)
• Mud Drilling Maximum Diameter: 6 Inch to 14 Inch (152 mm to 355 mm)
• DTH Drilling Maximum Depth: 200 meter
• Mud Drilling Maximum Depth: 150 meter
• Suitable Air Compressor: 900 cfm @ 200 psi
• Pull Up Capacity: 25,976 kgs
• Pull Down Capacity: 15,371 kgs
• Suitable Mud Pump: 4 Inch X 4 Inch Hydraulic Driven Centrifugal Pump

• Material: Metal
• Application: Construction
• Feature: Corrosion Proof, Excellent Quality, Fine Finishing
• Type: Tapered Drill Rod
• Country of Origin: India
• Specific Use: Drilling
• Taper Degree: 4°46’, 6°, 7°, 11°, 12°
• Shank Specification: Hex.19mm, Hex. 22mm, Hex.25mm

Fully-carburized Taper Drill Rod is to increase the surface carbon content of the drill rod through the carburization craft, level up the surface hardness and the overall strength, and increase the service life of the taper drill rod. Compared with the conventional taper drill rod, Fully-carburized Taper Drill Rod is high in strength and good in abrasive resistance. Under the same industrial and mining, the life of fully-carburized taper drill rods is times of that of the common taper drill rods.  

• Type: Dth Drilling Rig
• Brand Name: Durga
• Condition: New
• Application: Water Well Drilling
• Warranty: 12 Months
• After-Sales Service Provided: Yes at site 4 service in year
• Model Number: DT1000, DT500, DT1500, DT700, DT2000
• Place of Origin: India

We are enlisted among the preeminent Manufacturers, Suppliers and Exporters of Down Hole Hammer Drilling Rigs. The Rigs we make available known for their strong engineering design. Our Rig comes with side control panel and water seivel. Bulk orders of these are processed by us as per the specific requirements of the buyers.   Types : DT-300 DT-500 DT-700 DT-1000 DT-1500 DT-2000 DT- 2000 super

• Brand Name: Hi Tech
• Country of Origin: India
• Drill Diameter: 18 Inch
• Material: Mild Steel
• Maximum Lifting Capacity: 100 Kgs
• Pole Grabber Rotation: 90 Degree
• Maximum Lifting Height: 16 Feet
• Auger Dia: 450 mm

• Country of Origin: India
• Type: Water Well Drilling Rigs
• Color: As per requirement
• Feature: Sturdy Construction, Highly Durable, High Strength, High Performance, Easy To Operate
• Automatic Grade: Automatic
• Driven Type: Hydraulic
• Drilling depth: 500-600feet

• Brand Name: LCC
• Length: 3660 mm (12'FT)
• Color: Black
• Weight: 21.5 Kg
• Flushing Hole Size: 9.2 mm

• Brand Name: Maan
• Drilling Capacity: 75mm
• Voltage: 415V
• Frequency: 50Hz
• Power: 2HP
• Approxly Weight: 1600Kg
• Machine Measurement: 1300 X 1170 X 1870mm

Features: Fabrication Table for the Machine Milling Adaptor Attachment for the Machine Coolant Pump with Fitting Coolant tank for Pump Machine Lamp Rotary Table Drill Chuck with Key & Arbor Drill Sleeve Drill Vice Special T-Bolts Foundation Bolt

• Material: Rubber
• Finishing: Coated
• Shape: Round
• Color: Black
• Pressure: High
• Packaging Type: Roll
• Fluid Type: Water
• Specialities: Perfect Finish, Durable
• Country of Origin: India

• Country of Origin: India
• Certification: CE Certified, ISO 9001:2008
• Driven Type: Electric
• Warrenty: 1year
• Brand Name: Pushkar
• Hydraulic system: Rapid Feed Type 1 Hp Power Pack
• Hydraulic Cylinder Size: Bore Dia 63mm x 150mm Stroke
• Drilling Capacity: Upto Dia 10mm x 3 Holes
• Machine size: 900mm x 700mm x 1800mm
• Drilling Time S: Depends On Drill Size,Thickness Of The Component,Rpm,Feed
• Usage/Application: For Multiple Holes Drilling Across Different Industries
• Number Of Shaft: Single
• Capacity: Drill Dia 10mm x 3 Holes

• Material: As Per API
• Shape: Round
• Application: Oil & Gas / Water Well
• Grade: S135
• Feature: Highly Durable, Fine Finishing, Excellent Quality
• Type: Drill Pipe
• Country of Origin: India
• Size: 4 Inch
• Tool Joint: XT39

We are counted amongst the leading manufacturers, Suppliers and Exporters of EDM Electrode Tubes. We offer brass & copper EDM tubes that are mostly used in the Mould Making (EDM), Tooling (EDM), and General Manufacturing industries. EDM Brass tubes & EDM Copper tubes can be used in the complex hydraulic piping system, Syringe manufacturing Plant, and pharmaceutical industries for various applications. Also, EDM tubes are used for heating Ventilation & Air Conditioning (HVAC) System. Brass and Copper EDM tubes are available in single and multi-channel varieties, namely - EDM Brass tubes EDM Copper tubes

• Material: Hard Steel
• Diameter: 32 mm
• Usage: Mining & Drilling
• Surface Treatment: Hard Coated
• Features: Round Hollow Steel
• Rust Proof: Yes
• Size: 1200 mm to 4300 mm

• Shape: Round
• Color: Black
• Pressure: High
• Country of Origin: India
• Reinforcement: Single & Double Braid of High Tenacity Yarn
• Recommended For: Heavy Duty Pneumatic Application in Industry & Construction
• Inner Tube: Oil Resitance Modified NBR (Black)
• Outer Cover: Oil, Abrasion Resiatant Modified NBR (Black)
• Temperature Range: - 40°C to + 80°C Hose

• Material: Steel
• Application: Industrial Use
• Color: Silver
• Packaging Type: Box
• Country of Origin: India

Eliminate the hassles of ladders and scaffolding to safely spray hard-to-reach areas like high walls, vaulted ceilings, stairways, and soffits. Complete the job faster with less setup time with extension rod.

• Country of Origin: India
• Type: Drilling Rigs
• Color: Yellow
• Condition: New
• Automatic Grade: Manual, Semi Automatic
• Driven Type: Hydraulic
• Warranty: 1year
• Brand Name: HEW

Application Soil testing /geotechnical use Capacity Maximum Depth: 150m Hole Diameter 4 – 10” inch Prime mover 75 Hp tata engine Chassis Heavy 5” C channel structure Mounting Trolley mounting with two tyres Speed pull up: 18 Meter/ min Pull down: 22Meter/ min Feed system Hydraulic Cylinder With 1:2 Ratio Force Pull up: 7500 kg/ 3000 psi Pull down: 5500kg Transmission 5 speed Gear & Vertical gearbox Rotation Gear box throe Max RPM: 400 Max Torque : 350.5Nm/bar Water pump Centrifugal pump : 200LPm Mud pump :(OPTIONAL) Hydraulic 2 in one pump with 3000 PSI Tank capacity Oil tank : 120ltr Diesel tank : 40ltr Mass Length :4200 MM With 10ft road handling capacity Leveling jack 4 x hydraulic jack size :500mm length Additional Fitment Night lights , Tool box , rod stand SPT / auto hammer Impact energy :60%- 75% with customize system 

• Country of Origin: India
• Type: Water Drilling Equipment
• Weight: 1000-2000kg
• Condition: New
• Driven Type: Electric
• Color: Black, Brown, Grey
• Application: water Drilling

• Hole Diameter: 32mm - 64mm
• Vertical Drilling Depth: 20 Meters
• Horizontal Drilling Depth: 20 Meters
• DRILL PIPE DIAMETER: 32MM
• Drill Pipe Length: Custom
• Pneumatic Motor Power: 4 Hp(only Feed Motor)
• Minimum Required Pressure: 6 Bar(recommended 8 Bar)
• Free Air Delivery(min-max): 350-400 Cfm
• Working Pressure(min-max): 8-10 Bar

Another kind of rock drill, called the drifter drill, is used for horizontal holes in mining operations and tunnel driving. It is mounted on some type of rig or frame and is mechanically fed into the work. Stoper drills are used primarily on up-hole or overhead drilling because of the automatic-feed characteristics. The usual stoper is a hammer drill with a self-rotating drill bit and an automatic feed by means of an air piston. Large air-operated earth drills, mounted on motor trucks on trailers, are utilized for digging water wells and blast holes for quarry operations.  

• Material: Iron
• Finishing: Non Poilshed, Polished
• Color: Black, Silver
• Application: Construction, Rock Drilling,Minning,Water Well Drilling
• Length: 1-1000mm, 1000-2000mm, 2000-3000mm
• Grade: AISI, ASTM
• Feature: Excellent Quality, High Strength, Perfect Shape
• Dimension: 10-100mm, 100-200mm
• Type: Dth Drill Rods
• Country of Origin: India

• Automatic Grade: Semi Automatic
• Driven Type: Hydraulic
• Brand Name: Voltas
• Application: Mining
• Capacity: 80 meter
• No-Load Speed: 400 RPM
• Surface Finished: Paint Coated

• Brand Name: Pushkar
• Voltage: 220 V
• Machine Type: Automatic
• Power Consumption: 3 HP (min)
• Material: Mild Steel
• Capacity: 6 x 5mm -6 x 25 mm
• Usage/Application: Auto Sector,Lighting Industry,Pump and Generator,etc.
• Number Of Shaft: 6
• Hole Diameter: 0-25 mm
• Max Speed (rpm): 800 RPM
• Weight (kg): 700 Kg
• Phase: 1
• Pump Capacity (LPM): 60
• Maximum Tensile Stress: 60 N/mm

We offer the best quality Wagon Drill in the market. Wagon Drill is used to drill and blast rocks in quarries and other places. The Wagon Drill, which we offer, has sharp drilling parts that can effectually manage to drill hard surfaces. Also, we make it available in different sizes, as demanded.

• Country of Origin: India
• Type: Water Well Drilling Rigs
• Certification: CE ISI
• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg
• Automatic Grade: Automatic
• Driven Type: Hydraulic

• Application: Heavy Constructional Drilling Work
• Weight: 100-1000kg, 1000-2000kg
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Hydraulic
• Feature: Easy To Operate, High Performance
• Drilling depth: 1000-1200feet, 200-300feet, 300-400feet, 400-500feet, 500-600feet, 600-700feet, 800-900feet
• Hole Diameter: 200-300mm, 400-500mm, 500-600mm, 700-800mm, 800-900mm

Radiant series 7000 Hydraulic Drilling & Bolting Rig are rotary roof bolting machines with dust suppression system suitable for drilling vertical holes of 27mm to 43mm diameter and anchoring of roof bolts in underground mines in strata hardness up to 600 kg/cm2. It is totally indigenous equipment with modular construction consisting of 3 main assemblies�drive unit, hydraulic cylinder & chain carriage system. It can be mounted on most brands, makes & models of mining development or extraction machines plus a variety of tunneling equipments & can run with tapping from any of this hydraulic machinery. The machine�s tailor designed mounting system enable any specified bolting pattern to be achieved. Features Low noise, silent operation Easy maintenance & lowest service cost Can Drill Holes in a single pass thus saving time Suitable for Cable bolting for Hard rock Applications Most useful for bad conditioned roofs & unmanned mines The Rig travels two stage, one by hydraulic cylinder & second by cylinder & chain Water injection system helps in flushing cuttings, dust suppression & faster drilling Unique drive head design eliminates thrust load being transferred directly to the motor.

Capitalizing on our rich industrial experience and ultra-modern infrastructure, we offer a precision-engineered assortment of Drill Rods to buyers in the domestic as well as international markets. Our Drill Rods possess high level of tensile strength and are sturdy in construction. They are ideally used for the purpose of diamond core drilling, mineral exploration and Oil & Gas drilling. We are a renowned Drill Rods Manufacturer, Exporter and Supplier from Rajasthan, India. We provide customized Drill Rods as per the buyer’s requirements and specifications.

• Country of Origin: India
• Type: Drilling Rig Kelly Bar
• Material: Alloy Steel, Metal
• Application: Construction, Deep Foundation
• Color: Yellow
• Condition: New
• Warranty: 6 Months
• Advantages: High-reliability, High Abratsion-resietance, High Strength

We are offering pneumatic drilling machine.