Dry Cooler Dealers

• Voltage: 420 Volt
• Country of Origin: Made in India
• Type: industrial
• Brand Name: Omeel Coils
• Cooling Capacity (Ton of Refrigeration): More than 100 TR
• Features: air cooling
• Warranty Required: yes
• I Deal In: New Only
• Usage/Application: Industrial
• Body Material: MS
• Surface Finish: Paint Coated
• Phase: Three Phase
• Power Source: Electric

We are offering dry cooler. Cooling capacity: above 1 mw range use : cools fluids and generators or provides free cooling for commercial, industrial and healthcare applications. Designed for outdoor installation. May be used to replace a cooling tower.

Adiabatic Dry Coolers with PADS and EC axial fans designed to meet the demand for free-cooling applications. DR-Z units maximize the benefits coming from the adiabatic saturation of the air thanks to the built-in water recirculation system and EC electronically commutated fans. Water and power consumption are very low, increasing EER and making free-cooling operation possible for most of the year.

Operation Principle Thermax Dry Coolers are also known as Radiators/Remote Radiators, Fin Fan Coolers, Air Cooled Heat Exchangers. They work on the principle of convection and conduction to dissipate heat from process fluid to the air stream created by the fans mounted on it. By suitably selecting the tube material, we can use a dry cooler to effectively cool or condense process water, chemicals or any heat transfer fluid, even if it is corrosive or contaminated with particulates. Dry coolers are closed loop systems which eliminate any kind of water loss and thus eliminating the continuous requirement of make-up water. Being a closed loop circuit, the water treatment cost is also negligible as compared to conventional evaporative cooling towers. Construction Thermax offers two types of Dry coolers - 'V' type and 'H' type based on the application or requirement. The fans can be mounted according to induced draft or forced draft type, depending on the application. The fans are of direct drive type, but options with gear box or belt drive are also available. The tubes which carry the process fluid are of copper, carbon steel or stainless steel with aluminum fins to maximize the heat transfer. We offer two variations in fin configuration based on the operating fluid temperature such as- Continuous fin and High Fin tube bundles to optimize selection. The side panels are epoxy coated which makes it corrosion resistant and gives it an excellent appearance. Product Range Fluid Temperature: 30°C to 240°C with a minimum approach of 5°C above dry bulb temperature. Cooling Capacity range: 200 kW onwards Thermax can offer custom built dry coolers based on the application and nature of working fluids. Advantages of Thermax Dry coolers Modular designs of Thermax Dry Coolers helps in space optimization Highly efficient fin to tube heat transfer Zero usage of water which results in Zero water wastage: Due to closed loop operation and no evaporation No water treatment plant: As it doesn't require continuous supply of makeup water Negligible maintenance cost: As water treatment, makeup water and replacement of fills not required No periodic cleaning requirement Separates process side from any contamination due to closed loop system Plenum made of Epoxy coated galvanized iron, enhanced corrosion resistance Applications across Industries Steel – Electrical Arc Furnace / Induction furnace cooling Refinery & petrochemicals – Reactor column cooling Rubber - Roller cooling Polyfilm – Chill Roll Cooling Independent Power stations – Cooling of engine jacket water, lube oil and inter-stage cooler Plastics –Cooling of injection molding machine Textiles – Condensation of process vapour Refrigeration / Air conditioning – As condenser for air cooled chillers Power industry- Turbine lube oil cooler/ turbine intercooler

• Type: Dry Cooler
• Brand Name: Symphony
• Certification: ISO Certification
• Application: Dry Cooling
• Weight: 0-10Kg, 10-20Kg
• Voltage: 110V, 220V
• Condition: New
• Frequency: 50Hz, 60Hz
• Automatic Grade: Automatic, Semi Automatic
• Power: 3-6kw, 6-9kw
• Warranty: 1year
• Storage Capacity: 20-40L

We are offering indus dry fluid cooler, hybrid cooler. we are manufacturing dry type fluid cooler ( remote radiator ) suitable for dg set / air compressor – water cooled type / water cooled chiller / after cooler / induction furnace / injection moulding / hydraulic power pack & die cast aluminum etc. Our manufacturing factory is in khopoli near bombay & one plant in sharjah - dubai. We are in this field from last 40 years. so requesting you to confirm the appointment date & time of your availability by return mail. we will have very thankful to you if you will forward your valuable enquiries to us.

• Brand Name: Thermax
• Application: Refinery,Chemical,Pharmaceutical,EPC,Power,Steel
• Features: . Dry coolers can be used to effectively cool process water, chemicals or any heat transfer fluid, No water required hence low maintenance due to dry operation.
• Usage: Process fluid cooling
• Material of Construction: Copper or SS tubes with aluminium or copper fins
• Product Capacity: 30 TR (100 KW) onwards
•  :  

Cooling tower transfers heat from hot water to dry air by means of convection and evaporation and are often part of a total cooling package in combination with one or more of our heat exchangers. We can produce a complete turnkey system with the cooling tower, heat exchanger, water pumps, fan motor, fluid temperature controllers, variable speed fan drives, pressure and temperature gauges, automatic water treatment, all mounted on one galvanised skid needing only connection to power and water. The cooling towers are built with safety in mind as well as performance. Very low noise level cooling towers are available. Fan and Motor are mounted on the top of the frame. Fan has been dynamically balanced with the motor’s rotation RPM.In suction of air passing side fixed grid for security for finns . At the top of the area motor side fixed bird screen grid .

The fluid coils of international standards are designed and selected through software providing accurate data on thermal transfer rate based on which they are manufactured. The tower designed incorporates the shell and tube designed with copper tubing and aluminium foil fins. The water losses are 0.01% since, the circuits are of the closed loop type and the towers are most space saving energy efficient once. They are best suited for applications such as Furnace coil water cooling, DG Sets, Compressors. The fans are of aluminium die cast with adjustable pitch and are individually tested for different flow rates. They are all dynamically balanced. Since, the complete fan is of Aluminium Alloy Plastic it does not corrode when used in out door applications. Dry cooling towers are in a single unit can be provided in capacities from 1000 kw to 1500 kw and they can be multiplexed to reach many thousand or kilowatts.

The main function of the offered dry cooling tower is to cool and maintain the temperature of process hot water at a particular level. The tower works on a principle of heat transfer and is driven by an electric motor. The wound copper tubes eliminate any unnecessary leakage after installation. The tubes also allow better heat transfer efficiency. The positive and controlled expansion between the tube and fin provides a clean, smooth inner tube surface for water pressure drop and guarantees uniform heat transfer. The rigid galvanized steel frame provides protection against tube damage during expansion and installation. Also, it is mounted on a heavy duty channel base frame. The axial flow fans are noise-free. The low speed of the motor minimises noise and increases efficiency. Motors are specially designed to withstand moisture, rain and dust.

Dry coolers work on the principle of convection and conduction to dissipate heat from process fluid to the air stream created by the fans mounted on it. By suitably selecting the tube material, we can use a dry cooler to effectively cool process water, chemicals or any heat transfer fluid,even if it is corrosive or contaminated with particulates.

• MODEL: ATE15-DC
• CAPACITY RANGE:: 60 -1,300 kW
• COOLING  MEDIUMS:: Water, Glycols, Oils
• AIR DIRECTION:: Vertical
• CONSTRUCTION:: Tubes: Cu, Stainless Steel, Alu Fins: Al, Al-coated, AlMg3, Cu Casing: galvanised steel, powder coated RAL 7035
• CAPACITY RANGE:: 60 -1,300 kW
• COOLING  MEDIUMS:: Water, Glycols, Oils
• AIR DIRECTION:: Vertical
• CONSTRUCTION:: Tubes: Cu, Stainless Steel, Alu Fins: Al, Al-coated, AlMg3, Cu Casing: galvanised steel, powder coated RAL 7035

JC Equipments are designed and developed with to work with any size for various industries. Our Dry Cooling Tower designing department is routine updated with world standards according to the International Standards designing by CTI membership. Dry Cooling Tower Designing teams are technically qualified of engineer with facility to meet various application need.

Predominantly used for air compressor and power generating units for applications of engine water cooling. Petroleum plant, power utility, steel manufacturing industry, cement, sugar factures , chemical and gas-processing industrials.There are no mobile parts except for the fan and the motors. Hence the cooling tower maintenance is negligible.

dry cooler, Cold room Condensing Unit, AMMONIA CONDENSING UNITS

dry coolers

dry coolers, ac condensers, Spiral Heat Exchanger, Compact Systems

Dry coolers work on the principle of convection and conduction to dissipate heat from process fluid to the air stream created by the fans mounted on it. By suitably selecting the tube material, we can use a dry cooler to effectively cool process water, chemicals or any heat transfer fluid,even if it is corrosive or contaminated with particulates.

dry cooler, Heat Exchangers, Air conditioner