Dynamic Hardness Tester Dealers

• Country of Origin: India
• Voltage: 220V
• Driven Type: Electric
• Material: Metal
• Usage: Toys Testing
• Specialities: Proper Working, High Strength
• Weight: 900-950 Kg

We are offering portable dynamic hardness testers. We are a leading industry offering a wide spectrum of portable dynamic hardness testers. The product offered is an widely used for various measuring application in industrial sector. The construction of these range is very precise and accurate as these products are fabricated under surveillance of experts. features: sleek and handy design comes in a slim briefcase for carrying the machine alpha numeric display which indicates selected material and scale combination hardness value average key to select average of 2 to 10 readings improved electronics with micro controller circuitry and user friendly software 30 hardness scales for different probes selectable by feather touch keys auto detection of probe facility automatic shut down facility is provided when tester is not in use for continuously 10 minutes this model operates on 2 numbers of pencil cells printing is possible with all types of ports up to 100 readings can be stored in memory of the tester for printing purpose low test expenditure five numbers of probes can be given in different combinations such as dl, d2, g1, g2 and c, dl, d2, d3, d4 and d5 and dl, d2, g1 and sh conversion of uts facility is available on display by using side keys the on and off switch is provided with feather touch keyboard on front side in this model both serial and printer interfaces are available on single port automatic calibration facility of probe is available through keyboard date entry and date wise printout facility.

Mainly used to check hardness in confined spaces, on large & heavy components, permanently installed parts with low test expenditure. The machine has built in conversion facility for given material to convert ‘D’ value to Vickers (HV), Rockwell (HRB, HRC), Brinell (HB), UTS scales which can be selected by pressing arrow keys. 30 hardness scales for different probes selectable by feather touch keys. Alpha numeric display – 16 characters x 2 lines user friendly software. Display indicates selected material & scale combination & hrdness value. Facility to connect dot matrix printer Upto 100 readings can be stored.

• Display Type: LCD
• Packing Type: Boxes
• Character Support: Alpha numeric display is given with 16 characters x 2 lines
• Storage Capacity: 100 readings
• Application: Industrial, Commercial
• Drivent Type: Battery Operated
• Number of Pencil Cell Probs: 2

Measuring Principle  Dynamic Hardness Tester is an extremely light weight, portable, fast & reliable hardness tester based on a novel, dynamic & Rapid test procedure with widest measuring ranges for metals. A carbide tipped shuttle with a definite kinetic energy is impacted on the specimen. A part of this energy absorbed by the specimen and is a function of the hardness of the specimen. A tubular device housing electrodynamic energy measuring device carries out the impacting of the shuttle. A measuring instrument receives the signal, equivalent to absorbed energy through a cable and displays with instant calculations. This displays Dynamic hardness (D) a three digit figure, which is proportional to the hardness of the specimen. The machine has built inconversion facility for given material to convert ‘D’ value to Vickers, Rockwell, Brinell scales which can be selected by pressing ▲▼keys. Application• In stores for Material identification. • Measurement of Hardness in confined spaces. • Variation in hardness over large work piece. • Large & heavy components. • Permanently installed parts. • Surface hardened component or hardness on coatings. Packers and Movers Hyderabad Salient Features• Sleek and handy design, comes in a slim briefcase, for carrying the machine. • Alpha numeric display which indicates selected material & scale combination & hardness value. • Average key to select average of 2 to 10 readings. • Machine is having improved electronics with micro controller circuitry & user friendly software. • 30 Hardness scales for different probes selectable by feather touch keys (PIs. ref. the table).• Auto detection of probe facility is given. • Automatic shut down facility is provided when machine is not in use for continously 10 minutes. • This model operates on 2 numbers of pencil cells. • Printing is possible with all types of ports i.e. Dot matrix (Centronic parallel port). • Up to 100 readings can be stored in memory of the machine for printing purpose   (This facility is useful when operating the machine at site). • Low test expenditure. • Five numbers of probes can be given in different combinations. For eg. *Dl, D2, G1, G2 & C       *Dl, D2, D3, D4   &  D5 .      *Dl, D2, G1, SH &C • Conversion of UTS facility is available on display by using side keys (◄). This is applicable for only BHN   scale for the range 226 to 634 BHN (hard steel & hard alloys only). • Display last result (For eg. From Sr. No. 20 onward) facility is given by using upper arrow key(▲) & down arrow key (▼). Also we can scroll through stored readings. • The ON/OFF switch is provided with feather touch keyboard on front side. • In this model both serial & printer interfaces are available on single port (serial interface is an extra accessory). • Automatic calibration facility of probe is available through keyboard. • Serial interface is possible with RS 232. • Date entry & datewise printout facility is available. • We can recall the readings one by one by using arrow keys (▼)(▲) on display, in display result mode.Optional Features 1. Different types of probes are available     • Short (Suitable for checking hardness in holes, cylinders, etc.)     • Extended (Suitable for checking hardness in grooves, & recesses)     • Low Energy (Suitable for Surface Hardened Components, Coatings & Impact Sensitive Components)     • Standard (Suitable for general application)     • Heavy (Suitable for Castings & Forgings) 2. Special conversion scales can be offered to suit different material. 3. Machine can be connected to computer for data loading using our serial interface card which is an extra     accessory.Measuring Ranges For Standard Probe (D) / Shot Probe (SH) / Extended Probe (EX) Scales( as follows ) DIMENSIONS Probes- Standard (D) - Dia. 25 x 150 mm Short (SH) - Dia. 25 x 100 mm Extended (EX) - Dia. 25 x 150mm Heavy (G) - Dia. 30 x 255 mm long Low energy (C) - Dia. 25 x 145 mm long Digital Display Unit - 188(L) X 105(W) X 64(H) mmMEASURING ACCURACY Average Measuring deviation +/-1% referred to D = 800 on 'D' scale standard test block at a particular test location. OPERATING TEMPERATURE RANGE0°C to 50°C WEIGHT (Approx.) Probe (standard) - 150 gms.display Unit - 325 gms.Standard Test block - 3000 gms. Total Weightof Machine- 7 kg. (with all accessories & carry case) POWER SUPPLY CONDITIONS Model: DHT- 6  -    Dry cell batteries (1.5 VDC x 2 Nos.) Size - AA, Type R6. STANDARD ACCESSORIES • Probe (Normally 'D', if specified    other Probe can be supplied in place of ‘D)    - 1 NO. • Digital display unit                                                 - 1 NO.• Standard test block calibrated in D Scale        - 1 NO.• Brush for cleaning probe                                     - 1 NO.         • Carry case for Machine                                        - 1 NO.• Instruction manual                                               - 1 NO.• Coupling Jelly                                         - 50 gms EXTRA (OPTIONAL) ACCESSORIES > StandardTest Block of any hardness> Support rings Smaller radius for - • (SR 1) Convex, Concave, Cylindrical, Spherical radius 30 to 60 mm • (SR 2) Convex cylindrical radius 14.5 to 30 mm • (SR 3) Convex cylindrical radius 10 to 15 mm • (SR 4) Concave cylindrical radius 16.5 to 30 mm • (SR 5) Concave cylindrical radius 12.5 to 17 mm • (SR 6) Concave cylindrical radius 11 to 13 mm. > Serial Interface (Windows 98 Based). > 80 Col. Dot Matrix Printer. > Different types of Probes - 1. Standard(D) 2. Short (SH) 3. Extended (EX) 4. Heavy (G)5. Low Energy (C)

• Parameter: HRC
• Display Type: Digital
• Warranty: 2 Years
• Voltage: 230 V AC
• Frequency: 50/60 Hz
• Country of Origin: Made in India
• Material: Aluminium
• Model Name/Number: MET-D1
• Brand: MET
• Phase: Single Phase

Portable Dynamic Hardness Testers, automatic bar cutting machine

dynamic hardness tester, toc analyser, Metal Screw Closure

dynamic hardness tester, TCT Saw, Perforation Knives for Packaging Industry

dynamic hardness tester, Insulation Plates

dynamic hardness tester

dynamic hardness tester