Eccentric Plug Valve Dealers

• End Connection: Flanged
• Body: Cast Iron, Ductile Iron
• Nominal Size: DN15 to DN350
• Nominal Pressure: PN10 to PN63, Class150 to Class900
• Packing: Graphite, PTFE

Orbit Plug Valve comes with a fire safe design and is available in different trim materials. Sizes: 1/2-42" NPS Characterstics: Inspected, Quality Tested,Fire safe design,High Pressure Rating.

Eccentric plug valve, safety focused, economical, yet feature rich, Eccentric Rotary Plug control valve for applications demanding higher rangeability, precise control and higher flow capacity.Salient Features: Non-Crossover Shaft: Pocket-less flow-path tolerates slurries, even up to 3% paper stock. Unobstructed flow when fully open. Up to 70% greater capacity than other ERP control valves. Not eroded by process-born particles.

DeZURIK Eccentric Plug Valves feature a rectangular port design that provides wide tolerance seating geometry for lasting superior shutoff. The eccentric plug action and resilient plug facings assure lasting dead-tight shutoff. Standard features include corrosion-resistant bearings, welded nickel seat, grit excluders, and adjustable stem seal packing. Port area options include 100% of standard pipe area for applications where highest flow is required (such as pumped systems), and 7080% area for non-pumped (gravity feed) systems. The straight-through body design maximizes flow capacity and reduces head loss. Flanged or mechanical joint end connections are available. Eccentric Plug Valves are capable of handling clean and dirty liquids and gases, sludge and slurries.

• Size Range: 4“ – 72”
• Temperature Range: Up to 120°C
• Pressure Rating: PN10, PN16, PN25
• Connections: Flange, Mechanical Joint, FLxMJ
• Body Material: Ductile Iron, Stainless Steel
• Operating: gear box, electric actuator, fuid drive, Pnumatic drive

Features  Full port large fow capacity design,SS/Nickel welded seat surface, Full access topcover, Long life, Less Maintenance

The EFlo offers a high performance rotary globe valve which provides precision control over extended life span through enhanced safety. The MASCOT EFlo is a high performance, safety focused, economical, yet feature rich, Eccentric Rotary Plug control valve for applications demanding higher rangeability, precise control and higher flow capacity. The EFlo valve offers rangeability up to 160:1 - compared to 50:1 for typical globe control valves and 20:1 for most butterfly valves. A heavy-duty, non-crossover shaft is out of the valve’s flow path. This superior design allows higher flow capacity for a given valve size. It also eliminates shaft damage from erosive process fluids. Many competitor designs use a straight-thru shaft which presents an obstruction to the flow, limiting capacity and presenting a target for erosion. The EFlo offers positive, anti-blowout protection by means of a separate bonnet and integral shaft collar, as a standard option, emphasizing its status as the safest Eccentric Rotary Plug valve on the market. The end-post shaft is designed so there is no possibility for it to be lost downstream. The end-post is rugged, precision machined, perfectly aligned, and positively retained so movement is smooth and precise. The oversized shaft provides improved reliability and valve life by eliminating shaft failures and reducing bearing wear. Salient Features: Non-Crossover Shaft: Pocket-less flow-path tolerates slurries, even up to 3% paper stock. Unobstructed flow when fully open. Up to 70% greater capacity than other ERP control valves. Not eroded by process-born particles. Eccentric Rotary Plug: Plug does not rub seat ring. Less wear, less friction, more precision. Stable throttling, low dynamic torque. Stable throttling in either flow direction. Inherently Linear characteristic. Flow direction assists movement to safety position on air-failure. Robust, rigid seat and plug give increased durability. Tight Shut-off, Class IV (Metal Seat), Class VI (Soft Seat), even after prolonged usage. Separate Bonnet and Integral Shaft Collar: A positive anti-blowout as a standard feature, in full compliance with ASME B16.34 Section 6.5.1, ensures that the shaft cannot blow out, even if the actuator is removed. Trim Choices & Plug Design: Hardened plug gives high performance and long service life. Flow Capacity can be closely matched to the process application. Full Area, 75 / 70%, 40% seats are economical to replace when optimizing flow capacity or changing service conditions.

Series 55000 Eccentric Plug Rotary Control Valves are designed for on/off and throttling applications. The plug is offset to the shaft centerline. This allows the plug to break free of the seat ring immediately upon initial rotation of the shaft. Since there is no sliding contact between the plug and seat ring throughout travel, seat ring life and shutoff integrity are greatly enhanced. These valves are designed to overcome the problems of harsh, high velocity and high temperature processes, and they also provide accurate, reliable control in a broad range of applications, such as high and low pressure steam, clean/dirty corrosive liquids & gases, erosive and abrasive slurries etc.  

Eccentric Plug Valve, Lubricated Plug Valves, Blind plug

Eccentric Plug Valve, Gate Valve, Plug Valve, Cast iron plug valves

Feature Characterized by its Innovative eccentric Plug Optimal Performance in a wide array of process control application ‘Not-Through’ Shaft allows uninterrupted flow of fluids Maintenance cycle surpasses five year of use for the most applications Available with rack and pinion actuators

Neles Finetrol Eccentric Rotary Plug Valve, Neles Valve Guard

Eccentric Plug Valve, Blind plug, Lubricated Plug Valves, 3 way plug valve

Eccentric Plug Valve, Industrial plug valve, Cast iron plug valves

Eccentric Plug Valve, 3 way plug valve, Cast iron plug valves

Rotary Eccentric Plug Type Control Valve