Electrical Pressure Gauges Dealers

The adjustable contact arms P & Q can be set from outside individually by a knob at any required set point. The limit value switch is so designed that the instrument pointer can continue its movement beyond the set pointer, after the contact has been made.Electrical Magnetic Contacts are carfuly designed since they are subject to hard wear during use according to switching conditions because of the mechanical stress, the influence of current heat and the electric arc.

we are offering Electrical Contact type pressure gaiuges.

• Scale Range: 0.. Vacuum to 700 kg/cm2 and above on request
• Thread Connection: 1/4", 3/8", ½ ", BSP & NPT, M-20
• Nominal Size (mm): 100 , 150
• Accuracy in FSD: 1%
• Mounting of Gauge: Bottom, Surface, Back, Panel with 3 Holes, Panel with Bracket
• Case and Bezel: SS 304
• Pressure Elements: Bourdon Tube
• Diaphragm: Nil
• Nominal Size (mm): Brass, SS 316 and other material on request
• Application: Pneumatic control system, Air conditioning Pumps, Chemical & Petrochemical, Water treatment
• Electric Contact: 1NO, 1NC,1NO+1NC, 1NC+1NO (230 V AC/110 V DC Max, Current 1 Amp) Liquid filled on request

Contact Gauges are ideal in the applications which demands measurement and control of pressure by switching electrical contacts ON and OFF. This eliminates the need of separate switches for pumps and motors which gives audio or visual alarms. The small adjustable magnet mounted in the contact assembly, attracts the contact arm just before the set pressure value which prevent the common problem of arcing and burning of contact pins.   How to Order / Inquiry: Please advise the below Dial Size Connection Mounting Pressure range Application media Or Any other special requirement   Application: Stainless Steel Gauges are suitable for Chemical, Pharmaceutical, Petrochemical, Oil & Gas, Refinery, Paper & Pulp, Sugar Breweries, Cement Industries etc.

Engaged in manufacturing and exporting electric contact gauges that find application in several industries. Highly efficient and durable, these contact gauges are widely used for monitoring , measuring and controlling of the line pressure by switching on & off electrical equipment. Complying to set industrial norms, these gauges make or break an electronic control cycle as per the position of the instrument’s pointer and there is no need for a separate switch on these electric contract gauges.

• Dial Size: 150 mm
• Accuracy: +/‐ 1.6% Of FSD
• Connection: 1/2″ Npt (M)
• Make: Aavad
• Range: 0 To 40 Mpa (Single Scale)
• Case & Bezel: SS 304, Bayonet Type
• Socket: SS 304
• Movement: SS 304
• Sensing Material: SS 316, Bourdon Tube
• Contact Type: Magnetic Snap‐Action
• Dial: Aluminum, Black Markings On White Background
• Contact Rating: 230V AC, 1 Amp (Max)
• No Of Contacts: 2 NO + 2 NC
• Pointer: Aluminum, Black,
• Window: Acrylic Glass
• Over‐Range Protection: 130% Of FSD
• Mounting: Direct Bottom Connection
• Joint: Argon Welding
• Glycerin Filled: No

• Contact Accuracy class: 1,6 % of FS standard
• Casing: Stainless Steel 304 standard

The SE model contact pressure with electrical alarm contacts are suitable for controlling or regulating process sequences. The contact opens and closes electrical circuits in relation to the position of the pointer on the pressure gauge.Our contact pressure gauges with bourdon tube system are used at process pressures of approximately 1kgcm2 and upwards. The materials used make the gauges suitable for chemically aggressive gases or liquids,although these may not be too viscous or be susceptible to crystallization. The inexpensive tried and tested bourdon tube system coupled with modern modular principle provides a very reliable yet inexpensive contact pressure gauge. Electrical alarm contact are used as magnetic snap-action contacts,especially in harsh industrial conditions. The high contact pressure and the choice of different electrical contact materials enable high currents to be switched reliably. If the electrical switching spaces of the alarm contacts are exceeded or not reached (See DE 12 31), a relay is to be used to provide an appropriated current rating (DE 12 30). Inductive alarm contacts operate without physical contact and thus have no unfavorable effects on the pressure measuring system while having an unlimited service life. A control unit is always needed to operate these contacts. Contact pressure gauges with inductive alarm contact can be used in potentially explosive atmospheres,provided that the appropriate regulations are complied with.

We are offering high quality Electrical Pressure Gauge. Manufactured with cross coil moving magnet, the Electrical Pressure Gauges are highly reliable and efficient. Also, the Electrical Pressure Gauges are built with air-cored movement that ensures better functionality. Our Electrical Pressure Gauge is well tested for their quality and performance on various parameters in our hi-tech lab.Additional Information Minimum Order Quantity : 48 Packaging Details : 1 packet of 12 pieces Delivery Time : Within 10 days Special Features Cross coil moving magnet Air-cored movement Reliable Durable

• Material: Alloy Steel, Stainless Steel
• Shape: Round
• Color: Grey, Silver
• Application: Liquid Pressure, Measuring Gas
• Condition: New

• Accuracy: 1 .0% of FS.
• Ambient temperature: - 20oC to + 65oC
• Process temperature: 2 Max. 100°C
• Over pressure limit: Not Suitable
• Socket: AISI 316L SS (Directly welded to case)
• Movement: AlSl 304 SS
• Joints: Tig Argon Arc Welding

Special Features : CE Approved electrical contacts Stainless steel case & measuring system Filled version  available Standard followed in general EN 837-1 Application : To control the electrical operation of compressors Pumps Motors Presses Hydraulic Pneumatic equipments Chemicals Petrochemical plants

Our Electrical Contact Pressure Gauges are reckoned for their make and long service life. Product packaging is done using industrial grade materials by us to ensure safe and undamaged delivery of consignments. Further, we provide tailored packaging solutions. The team of quality auditors ensures the product quality on several counts prior to final dispatch.

These gauges can be used for different monitoring, measurement and control of line pressure by switching “on or off” electrical equipment.  Application : Pumps, Motor, Turbine electrical & Electronics Instruments etc.

• Accuracy: 1.6% or 1.0%
• Dial Size: 100 mm and 150 mm
• Frequency Hz: 50Hz
• Voltage Level: 380 Volts AC/DC

• Type: Electrical Contact Pressure Gauge
• Color: Grey, Silver
• Connection: Bottom Connection
• Condition: New
• Power Source: Electric