Electro Hydraulic Thrustor Dealers

Electro hydraulic thrustor are supplied to suit various make of crane such as Amsak crane, Apex crane, Atlas crane, Avon hoist, Electromech crane, Esquare crane, Grip crane, INDEF crane, Intelle crane, K2 crane, Kone crane, MM engineers crane, Krans Crane, Magna crane, NE crane, SL crane, Sri Pranav crane, Sun crane, TAK crane, Unitech, Viralishanmuga crane, WMI crane, etc. Also, Electro Hydraulic Thruster Brakes of various make such as Speed-O-Controls, Speed-N-Systems, Strom kraft, Electromag are supplied.

Speedage mill duty Thrustor Brakes are suitable for 400440 Volts, 3 Phase A.C. supply for a wide range of drum sizes, from 100mm to 600 mm dia. Higher sizes can also be supplied against specific requirements. The brake is applied by the tension of the compressed springs mounted vertically between the thrustor and brake lever. The thrustor rods are connected with the brake by means of an angle lever. As the piston travels upwards the angle lever turns, pushes the brake rod and compresses the brake spring. Simultaneously, the brake lever on the other side of the wheel (Brake Drum) is retracted. The brake lever at the thrustor begins to move when the first lever reaches the stop on the brake base member

Thruster brake is a device used to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a pre-stressed comprising spring. The shoes press on the rotating brake drum retarding its speed and finally stop it. The releasing of the brake drum and compressing of the spring is done by thruster.

Electro-Hydraulic Thruster is a device which develops linear thrust (or force) required to operate the desired mechanism. The Thrusters are widely used to actuate thruster shoe brakes, commonly used in material handling equipments. Thrusters are available in various models.

• Application: All Material Handling and Lifting Equipments, Winches and Conveyors, Lifts and Elevators
• Thruster Capacity (Kg) :: 18, 34, 46, 68, 114
• features: Consumes low power., Can work continuously for 8 hours., Maintenance free, robust design.

• Diameter: 100 mm to 1000 mm
• Torque range: 61 kgm to 2500 kgm

Electro Hydraulic Thrustor Brake is a heavy duty brake designed to withstand the severe duty conditions imposed by heavy duty machinery in various industries. Electro Hydraulic Thrustor transmits useful thrust through the lever onto the brake shoe thereby releasing the brake. When the power is switched OFF, the brake is smoothly applied because the hydraulic thrust acting against the spring pressure is gradually reduced. diameter

• Material: Cast Iron
• Temperature Range: 45 to +45 C
• Voltage: 440 V
• Features: Easy installations, Nominal, Quality high, Durable

• Available torque: 4 kg-m to 125 kg-m

Brake is operated by pressurized oil,Oil pressure is generated by induction motor placed inside oil tank,Operating voltage is 415 v three phase 50 Hz,Available torque 4 kg-m to 125 kg-m. Higher torque available on request,Shoe type friction disc.

• Phase: Three phase
• Automation Grade: Semi-Automatic
• Application: Industrial
• Power Source: Electric
• Brand Name: STE
• Voltage (V): 220 V

• Product Code: MDT 100-18
• Short Decription: Thrustor Brake Drum Diameter - 100 mm Thrustor type-EMT-1 Torque-6KG-M

Thrustor Brake Drum Diameter - 100 mm Thrustor type-EMT-1ST520 Torque-6 KG-M Operating Voltage-415V

Mill duty Crane Control Equipments make Electro Hydraulic Thruster Brakes that are suitable for 400440 Volts, 3Phase AC supply for a wide range of drum sizes from 100mm to 600mm dia. The braking to the shoes is transmitted from the springs by means of an extremely rigid and simple lever tie rod mechanism.The design of the Brake is such that as the Lining keeps wearing out due to normal operation of the Brake, the Thruster stroke adjusts itself on its own to achieve the rated torque.

• Model No. Kgs.: 47-2040 to 47-3250
• Weight: 15 to 36

Electro Hydraulic Thrustors consists of a cylinder filled with oil containing the centrifugal pump located at the bottom and electric motor assembled on the top cover. The Rotor Shaft of the Motor is extended vertically downwards in the cylinder and carries an impeller at its lower end. The top bearing of the motors are grease lubricated and the bottom bearing is splash lubricated from oil in the tank. The Thrustor motors are totally enclosed `B� class insulated, suitable for AC 400440 Volts, 3 phase, 50 Hz supply. Electro Hydraulic Thrustor is robust and dependable, possessing the stamina needed for the toughest duty conditions imposed by unattended drives in any industry. Because of its extra-ordinary versatility it has wide applications in electrically driven Hoists, Cranes, Elevators, Ropeways, Flap Valves, Guillotine Machines, Conveyors, Steel Mills, etc.

We are leading Electro Hydraulic Thrustor Brake MITOOL Electro- Hydraulic Thrustor Brakes are suitable for 400 440 volts 3 phase A.C. Supply for a wide range of drum sizes from 100 mm to 600 mm dia higher sizes can be supplied.

Electro Hydraulic Thrustor, Master Controller, Resistance Box

Electro Hydraulic Thrustor, Hot Washed Pet Flakes, tap set, PVC Tape

Electro Hydraulic Thrustor, pneumatic brakes, Electro Magnetic Disc Brakes

electro hydraulic thrustors, mill duty thruster breaks

Electro Hydraulic Thrustor, Limit Switches