Electromagnetic Brakes Dealers

• Voltage: 24 / 96 / 105 / 190 / 205 VDC
• Torque: 2 Nm to 1600 Nm

A.C/D.C. Fail Safe Brakes are operating on A.C/D.C. Supply and used to stop motion where emergency stop is required. The Brake is normally in ON Condition ( In Braking Condition) and when D.C. Supply is given to the coil, the Armature Plate attracts towards the Brake Stator against the springs. When the supply is cut off, the brake will engage by means of spring pressure.   EM Fail Safe Brake A.C/D.C. Fail Safe Brakes are operating on A.C/D.C. Supply and used to stop motion where emergency stop is required. The Brake is normally in ON Condition ( In Braking Condition) and when D.C. Supply is given to the coil, the Armature Plate attracts towards the Brake Stator against the springs. When the supply is cut off, the brake will engage by means of spring pressure.   APPLICATIONS: · Brake Motors · Cranes , Hoists, Lifts & Material Handling Equipments. · Textile Machinery · Printing Machines · Marble / Granite Machinery · Steel, Cement & Paper Plants · Industrial Presses · Industrial Robotics · Wind Mills

• Brand Name: Series: EAA, EAR, PMB, FRA, ERC, EDA

We are offering electromagnetic brakes. Electromagnetic multi disc clutches, electromagnetic brakes (flux outside plates). Features: > wet or dry operation > special self adjusting design possible > steel-sintered bronze or steel-liner friction combination > rotating field > special stationary field design possible rated dynamic torque range from 10 n-m to 10,000 n-m & Outer dia range from 100 mm to 560 mm.

Powerful Erich Small Electro Magnets that is used in varied applications. Ideal for use in machine mechanisms, automation, applications with remote hold/release requirement. AttributesPowerfulRange of sizes from diameter 25mm to 145mm. and 6, 12, 24 and 48 V DC.Optimum performanceUsed with Erich armature platesSuitable for holding any smooth ferrous surface of adequate thicknessZinc plated magnet bodyArmature platesMagnets mounted on rear faceCenter tapped holes or 3 tapped holes on PCD ApplicationsHolding/ energizing or releasing / de-energizedMachine mechanismsDoor guard lockingElectrical connection by free leadsNon magnetic shim between magnet and armature

We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distribution network, our warehouse enables us to maintain year round availability of products.We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distribution network, our warehouse enables us to maintain year round availability of products.We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distributi We make sure that our payment procedure is safe and simple. We offer our clients methods like online payment gateway, electronic funds transfer, cash, bank deposits and various others.

• Country of Origin: Made in India
• Material: Cast Iron
• Packaging Type: Carton
• Torque Range: 200 nm

powder brakes and clutches are proportional torque devices. Torque is controlled by varying the excitation current. Torque is strictly proportional to excitation. These devices has minimal drag torque, i.e. At zero excitation, torque is minimal and near to zero. This devices are for high torque – low power applications. Magnetic powder brakes and clutches are manufactured by us in wide range torque rating starting from tiny 0.3 kgm to massive 100 kgm, & comes in self cooled, forced cooled and water cooled models. These devices come with matching electronics to meet your most exacting applicationsmagnetic powder brakes and clutches are popularly known as powder brakes & clutches. These powder brakes & clutches are manufactured by us in wide range from tiny 0.3 kgm to massive 100 kgm torque rangethese are manufactured in self cooled, forced air cooled & water cooled version. Powder brakes & clutches are real torque control device, meaning braking or clutching torque is strictly proportional toexcitation currentthe magnetic powder brakes and clutches achieves at low control power a high torque being independent from the slip speed. It distinguishes itself by a simple construction, low weight and small required space. Due to this advantage the clutch / brake is used for the solution of many technical problems. For the various applications also appropriate control devices are necessary. By changing the exciting power force, the torque to be transmitted can be adjusted infinitely variable in the range 1:30the powder brakes & clutches contain, as their name suggests, a magnetic powder. The electrical current passing through the coil generates a magnetic field, which changes the property of the powder, from free flowing condition at no excitation to solid rock condition at full excitation. Thus producing a smooth braking torque through friction between rotor and stator. The powder brakes & clutches produces their rated torque at zero speed. The element to be tested / clutched, can be loaded at standstill to determine the starting torque.powder brakes & clutched are used as unwind & rewind torque control, with load cells, dancer & tension control, to maintain constant tensionpowder dynamometers, water cooled powder brakes & clutches manufacured as dynamometers. As loading devices, to test prime movers such as engines, motors & mechanical transmmission devices such as gear boxes, bearings, shafts, belts, etc.

• Type: Spring Loaded Fail Safe Brakes
• Material: Carbon Steel
• Driven Type: Electric

vna engineers manufacturer of vide range of products with brand name of 'indoflux ' . Offer a wide range of electromagnetic clutch , brake , bearing mounted clutch , bearing mounted brake , flange mounted clutch , flange mounted brake , clutch brake combination  enclosed as well as open type , failsafe brake , rotor for failsafe brake , custom design of electromagnetic clutch brake  as per customer requirements .  aplication area  -  1) textile machineries , lr c 1/3 card machine  , draw frame , speed frame , ring frame , cheese winding etc . 2) packaging machinery -  form fill seal machine , capping machine , levelling machine  etc . 3) industrial washing machine  , carnes , lifts  etc. 4) marble processing machine  such as dressing machine  . 5)  steel plants  machinery  6) cement plants  such as stacker reclaimer    7)  machine tools , printing machinery , robotics 8) tyre making machinery , 9) construction machinery   10) coil winding machinery   11)wire drawing machinery  12)battery operated electric vehicles , wheel chair , x- ray machines ,  13)cranes and hoists , servo motors , presses ,  tower cranes , goods lifts , golf carts and many more 

• Surface finished: Galvanized
• Material: Mild Steel
• Feature: Less power consumption
• Brand Name: Shivam
• Corrosion Resistance: Yes
• Size: Multisize

Emco Simplatroll DC Flange Mounted Electromagnetic Brakes are designed for high consistent operating characteristic. With torque range 7.5-2500Nm. These Brakes are available with 3 different design to stop the drive or load side either shaft, pulley, sprocket. These are maintenance free & provided with unique pre-stressed spring made of German Spring Steel & coil with F insulation to give million of operations without fatigue. With asbestos free friction materials & long life.

• Material: Cast Iron
• Voltage: 415 V
• Brand: Voltas
• Phase: 3 Phase
• Usage/Application: Industrial
• Frequency: 50 Hz
• Min Brake Diameter: 130 mm
• Torque Range: 0.7 Nm -2,000 Nm

In order to keep the products in safe condition during transit and handling, we meticulously pack them at our own packaging facility. Also, we make sure that the packaging material is sourced from the trusted vendors. Sternly packed and delivered safely to the customers' provided address and that too in the committed time span. The anticorrosive magnetic particle brakes & clutches we offer are designed for high-strength, superior performance, easy installation and low maintenance.

• Drum Size: 150mm, 160mm, 8″/200mm

Limit switch attachment, Manual release, Residual magnetism adjustment, Shunt and Series differently-sized versions : 8 Inch to 30 Inch 160 mm to 800 mm, Conforms to NEMA and AISE standards, Fail safe operation, Unique design for maximum torque and minimum shoe wear, Brakes equivalent to Russian ‘TKπ ‘ design are also available, Heavy duty encapsulated coil with class ‘F’ insulation

• Torque: 0.6 NM to 2.4 NM.

Emco Simplatroll DC Electro Magnetic Flange Mounted Brakes(Normally Off) are designed for high consistent operating characteristic. With torque range 0.6-2.4 Nm. These Brakes are available with 3 different design to stop the drive or load side either shaft, pulley, sprocket. These are maintenance free & provided with unique pre-stressed spring made of German Spring Steel & coil with F insulation to give million of operations without fatigue. With asbestos free friction materials & long life.

• Size: 0-5inch, 10-15inch
• Type: Dc Magnetic Brake
• Material: Aluminum, Cast Iron, Metal, Steel
• Shape: Round
• Application: Machinery
• Color: Golden, Gray, Silver
• Condition: New
• Feature: Corrosion Resistance, Durable, Easy Installation, Heat Resistant, Robust Design

• Make / Brand:: EMCO Simplatroll
• Model Name / Number: 14.458 EMCO SIMPLATROLL
• Voltage:: 190 V.D.C,24 V.D.C,96 V.D.C and other special voltage
• Country of Origin:: Made in India
• Model / Type:: 14.458.06,14.458.08,14.458.10,14.458.12,14.458.14,14.458.16,14.458.18,14.458.20,14.458.25
• Replacement for:: Emco Simplatroll type 14.438 and 14.448 (Older version)
• Price: Varies based on Model / Type / Size / Voltage and Specifications
• Gear Hub:: Included in supply. Bore: Pilot or Finished Bore as required
• Suitable for / Applications:: EOT Crane,Hoist,Brake Motors,Machinery,Servo Motor, Wire drawing machinery, Packaging Machinery
• Replacement in place of Other Brakes Make/Model: UNITORQ UMP, PETHE SLDC, DYNATORQ, LENZE 14.448, EMCO PRECIMA FDB, MAGPOWER FSB, CRYOTRON MAGNADRIVE FBR, SEW Brake, Bonfiglioli, Stahl, INTORQ,LENZ and other DC Brakes.
• Email:: info@powermechengineering.com

• Application Areas: Steel Industries, Conveyor application, Wind Turbine,Mines .
• Features: Compact design, Easy mounting, Low maintenance, Cost Effective
• Max Braking force: 10054 N
• Min braking force: 9550 N
• Max clamping force: 12,567 N
• Min clamping force: 11,938 N
• Operating pressure: 50 max
• Air / oil consumption: 20 cc
• Pad width: 60 mm
• Pad area: 10,200 sq mm
• Max allowable wear of brake pad: 5 mm
• Nominal Co-efficient of friction: 0.4 µ
• Max Air gap: 0.5 mm
• Weight: 15.5 kgs

We manufacture Spring Loaded Disc type brakes suitable for A.C. Single phaseThree phase 50cycle power supply. Normally the brake is in "Brake ON" position. Brake is OFF (Brake-OFF) when power is supplied Braking action automatically takes place (i.e. Brake-ON) when power supply is cut off or power failure occurs.

• Brand Name: Vortex
• Material: Stainless Steel
• Features: Sturdiness, Long lasting, Rust proof
• Finish: Coated
• Torque: 1.5 N-m to 800 N-m
• Surface: Galvanized
• Special Versions: Upto 6300 N-m

Instant Operation Maximunm No. of Operations 240 Requires Stroke Adjustment Sizes 100 mm to 400 mm Braking Torque - 2 Kgm. to 65 Kgm. Disk Brakes for Hoist, with torque rating upto 35 Kgm Available in single phase 220V, 440V &  3 phase 440V