Electromechanical Actuators Dealers

The Support Unit comes in six types: models EK, FK, EF, and FF, which are standardised for standard Ball Screw assembly provided with finished shaft ends, and models BK and BF, which are standardised for ball screws in general. The Support Unit on the fixed side contains a JIS Class 5-compliant angular bearing provided with an adjusted preload.

• Torque: 114 kN
• Thrust Forces: Up to 12 tons
• Frame Size: 32-125 mm
• Operating Temperature: 14deg-158degF
• Material of Construction: Aluminum
• Rod Diameter: 22-85 mm

• Type: Solenoid Actuator
• Certification: ISO 9001: 2008
• Color: Blue, Metallic, Silver
• Voltage: 22 V Dc, 24 V DC
• Condition: New, Used
• Finishing: Non Polished, Polished
• Packaging Type: Box, Carton, Corrugated Box, Plastic Packet
• Pressure: High Pressure, Low Pressure

The "Emtork" Electric Actuators are electromechanical units used for operating the final control elements like valves or dampers to control the flow of fluids flowing thru the pipes or ducts. The specific advantages of using these units are : Ease of operation. Remote control facility. Proportional action of final control element in close loop system. Attaining & holding the desired preset position of the valvedamper. Various indications & alarms are available on the remote control panel & also on the unit. Emergency manual operation possible in case of power failure. Works on most convenient & easily available source of energy i.e. electricity.

• Finishing: Polished
• Packaging Type: Box
• Usage: Lab
• Wire Material: Copper
• Warranty: 1 Year

GWL- A   Solenoid (Helix), Iron Core: For studying magnetic induction properties produced by electric current and the effect of an iron core. Consists of plastic spool with windings of enameled copper wire having brass binding posts on square end supports. Includes a soft iron core rod of diameter 18 cm.   GWL- B   Solenoid (Helix) Air Core: To provide external magnetic field where required and to change the rate of magnetic flux passing through a coil.   Consists of a plastic spool with windings of insulated copper. End plates have brass bindings posts. Capacity 10 amperes when used intermittently and 5 amperes when used continuously.

• Type: Surface Mounting Type Switch with Mounting Holes
• Contact Type: NO or NC
• Size: 20mm*8mm
• Hole gap: 13mm
• Size of Screw: 3mm with head of 5mm
• Operating Gap Minimum: 15mm (Approx.)
• Contact Rating: 100 V DC, 0.5 A, 10 W
• Wire Size: 15 inch long wire
• Plastic case Material: ABS resin 1st grade

• Length: 1.5inch
• Phase: Single Phase
• Pressure: Medium Pressure
• Voltage: 230 V AC

Tsc is the best manufacturer of rolled ball screw, with single nut, double nut all types. Tsc ball screws and nuts are used extensively in ball screw linear slide table xy cross table, precision xy table, linear guides welding robots, electromechanical linear actuator, linear actuator, glue dispenser linear rail, cnc router, 3d printer belt drive linear rail, timelampse device linear rail, belt driven linear actuator, acrylic laser cutting machines, brass laser cutting machine, aluminium laser cutting machine, motion linear motion module for camera linear rail photography, timelampse linear way, motorized linear rail 3 axis, slide rail actuator, electromechanical linear actuator, laser machine, laser systems, automatic welding machines, vertical parking equipments, copper laser cutting machine, co2 laser cutting machine, die board laser cutting machine, die laser cutting machine, fabric laser cutting machine, fiber laser cutting machine, laser cutting machine, laser cutting tools, mdf laser cutting machines, ms laser cutting machine, glass cutting machine, dispensing machine, xy axis stages structure, gluing machine table, cnc cutting machine, cnc turning machine, flat bed tables, tsc is the best manufacturer of end supports for ball screw ff, fk, bk, bf, ek, ef models all types. Tsc is also the best manufacturer of ballscrew nuts. These products are available in sfu, fsu, fsi, fdu, fdi and rsu models. In addition to this, we also provide these products in fsc, fse, fsw, rsw, fdw and fsk models. These robust products are available at affordable prices. Tsc rolled ball screws are as per tbi taiwan design.

Electro-Mechanical Actuators - U : Electro-Mechanical Actuators - U are meant primarily for use on rotating work spindles where there are restrictions on the use of pneumatic or hydraulic rotating cylinders for the actuation of power chucks, expanding mandrels, collets etc. It can rotate maximum upto 3000 rpm. download data Electro Mechanical Actuator - UF : Electro Mechanical Actuator - UF have been developed as a time saver for quick and efficient clamping and de-clamping of arbors on machines (milling machines, boring machines etc.) which have steep, self-releasing taper on the spindle. Where a number of tools are to be used for an operation, GMT EMA enables the work to be completed in a single set-up. Use of this Electro Mechanical Actuator ensures fast and quick change of tool and cuts non-productive time drastically. Since the operation on the work piece is finished in one set-up, in process inventory is reduced. download data Stationary Electro Mechanical Actuator : Model - ST : Stationary Electro Mechanical Actuator With Rotary Output Model - ST are equipped with a 100% duty cycle motor and are used for: (a) actuating machine vices. (b) clamping and de-clamping of components on fixtures. (c) Feed drives for drilling machines. download data

• Type: Solenoid Actuator
• Certification: ISO 9001: 2008
• Color: Blue, Metallic, Silver
• Voltage: 22 V Dc, 24 V DC
• Condition: New, Used
• Finishing: Non Polished, Polished
• Packaging Type: Box, Carton, Corrugated Box, Plastic Packet
• Pressure: High Pressure, Low Pressure

• Type: Piezoelectric Actuators
• Material: Brass
• Shape: Round
• Application: Electronic Equipment
• Certification: CE Certified
• Color: Golden, Grey-golden, Metallic, Shiny-Golden, Silver
• Condition: New, Old
• Driven Type: Battery Operated
• Feature: Longer Service Life, Low Maintenance, Optimum Strength, Quality Tested, Top Performance

We are the main supplier of this product.

A ball screw is a mechanical linear actuator that translates rotational motion to linear motion with little friction. A threaded shaft provides a helical raceway for ball bearings which act as a precision screw. As well as being able to apply or withstand high thrust loads, they can do so with minimum internal friction. They are made to close tolerances and are therefore suitable for use in situations in which high precision is necessary. The ball assembly acts as the nut while the threaded shaft is the screw. In contrast to conventional leadscrews, ballscrews tend to be rather bulky, due to the need to have a mechanism to re-circulate the balls. Applications : Ball screws are used in aircraft and missiles to move control surfaces, especially for electric fly by wire and in automobile power steering to translate rotary motion from an electric motor to axial motion of the steering rack. They are also used in machine tools, robots and precision assembly equipment. High precision ball screws are used in steppers for semiconductor manufacturing.

• Temperature Range (F): -65F to 160F (TBD)
• Voltage (VDC): 28 VDC - 270 VDC drive voltage
• Output Rating (HP): 0.15 - 4.4 HP peak power range

With over 25 years of electromechanical flight control actuation, Parker has a strong heritage in electromechanical actuation and motor control for aerospace applications. Our EMAs allow for electronic control conversion to mechanical displacement through using AC or DC motor controls. Our actuation is used to position the aircraft flight control surfaces, improving fuel efficiency, and reducing pilot workload. Our broad experience and EMA pedigree include both military and commercial applications.

• Phase: Three Phase
• Features: Driven by high quality ball screw, good repeatability and long lifetime, Servo-motor can be installed for industrial application
• Model: SQFL120
• Profile Width: 120 mm
• Max Stroke Length: 1500 mm
• Max Speed: 300 mm/sec

The field of Aerospace demands high-performance machining centers and sturdy laboratories. At Nucon, we have the advantage of contemporary equipments and state-of-the art laboratories to achieve great results and everything required for Aerospace and Defiance application.Indeed our precision Electro-Mechanical systems have enabled us to carry out plans with great success.

• height up to: 2−3 mm

Electro-mechanical Linear Actuators are used for pullingpushing, liftinglowering applications in Cement, Steel & Power generation plant e.g. operation of DamperValve, to operate material handling Gates. It is self blocking and positive drive (proper substitute to avoid problem faced with Pneumatic & Hydraulic Cylinder) to develop powerful breakaway force. The Models available in range of 135 Ohms 400 Ohms 1000 Ohms 4-20 mA (2 Wire) 4- 20 mA(4 Wire).