Electronic Lab Trainer Dealers

Oscilliscope Demonstrator Trainer is specifically designed for the study of working of an oscilloscope in an open form. The Controls are placed actually at the place as they are in the layour schematic. Thus a trainee can easily locate any section & components in the section and study it throughly. The function trainee to verify their effect on the working of the scope. Creatic of Faults and rectification of faults are important exercise covered in the experiments.

• Certification: CE Certified
• Color: Green
• Driven Type: Battery, Electric
• Flash Memory: 32K
• Micrtocontroller Bit: 512 K Bytes
• Connector Points: USB, ADC, DAC, SPI, IZC and JTAG are Terminated in Connector Points for External Interface
• Display: LED Display

ARM Trainer from Minmax Electronics is based on the popular Philips / NXP ARM-7 Microcontroller LPC 2148 This 32 bit Micrtocontroller has 512 K Bytes of flast memory 32 K bytes of RAM, It is working with 12 MHz crystal. All the portlines, USB, ADC, DAC, SPI, IZC and JTAG are terminated in connector points for external interface. The ARM Processor is programmed through VARI / channel from the PC Sample ‘C’ programmes are provided to display a message on LCD, Scan a matrix Key board and display Keycode, read the analog value of trimpot connected to A to D converter and display the value, generate difference waveforms through onchip DAC displaying some message on the 7 Seg. LED display etc.

• Power Supply: Max 230V AC, 50 Hz ±10%
• Fuse: 350 mA, slow blow
• Frequency Ranges: Selectable1 Hz to 10 Hz, 10 Hz to 100 Hz, 100 Hz to 1 KHz ,1 KHz to 10 KHz, 10 KHz to 100 KHz
• Sine Wave Generation: By Wave Shaping Circuit

The "Function Generator Trainer NV7102" is a versatile training kit for Electrical and Electronics Laboratories. It is designed to explain the fundamentals of Signal Generation. A Function Generator is a product that can produce various patterns of Voltage at a variety of Frequencies and Amplitudes. This Function Generator Trainer allows students to produce the different waveforms and to understand the concept of their generation.

• Usage/Application: Industrial
• Phase: Single Phase
• Automation Grade: Automatic
• Frequency: 50 Hz
• Material: MS
• Packaging Type: Box

This has Built-In DC +12V/ AC 12V 50Hz/500mA Fixed Power supply, SCR 2P4M / TYN604  with UJT as relaxation oscillator and resistive load is used to study all the SCR gate triggering methods like SCR gate triggering using DC Voltage, using AC Voltage, UJT relaxation oscillator, using Square wave I/P, using RC Network (5 Methods), maximum test points provided to observe the intermediate effects.Objectives : To Study SCR gate triggering using DC Voltage.  To Observe & Note VAK w.r.t. change in DC gate Voltage. To Study SCR gate pulse triggering using UJT as relaxation oscillator.  To Observe & Note VAK w.r.t. change in gate pulse width. To Study SCR gate triggering using Square wave I/P.  To Observe & Note Voltage VAK w.r.t. change in gate pulse width. To Study SCR gate triggering using RC Network. To Observe & Note Voltage VAK w.r.t. gate I/P. To observe & Note firing & conduction angle of SCR and Note the change w.r.t. change in RC Values. To Study SCR gate triggering using AC Voltage.  To Observe & Note VAK w.r.t. applied AC I/P Voltage. Accessories Included : Set of Patch Cords, Operating Manual.

Transistor characteristics (model : il-07) -two variable dc regulated power supply of 0-12v at 250ma -dual range dc voltmeter of 1.5v15v -dc ammeter of 0-10ma -dc ammeter of 0-250ua -required number of patch cords -operation manual.

• Type: Electronics Laboratory Instruments
• Weight: 20-30kg
• Color: Grey
• Voltage: 220V
• Warranty: 1yrs
• Brand Name: ENERZIO
• Usage/Application: DC MACHINE LAB
• Condition: New
• Accuracy: Lab Instrument

We are the main supplier of this product.

The offered Maxwell Bridge is used as standard testing instrument for accurate measurement of self inductance in term of capacitance. With the help of our state-of-the-art infrastructure unit, we are able to manufacture and supply superlative quality Bridge. Provided bridge is manufactured under the supervision of talented professionals in order to meet set quality standards. Moreover, this Maxwell Bridge is available to clients at discounted prices.   Features:   R - 3 Decade resistance dial having range x .1 , x 1 and x 10 ohms. C - 3 Decade Cap.dial having range x0.001mfd,x 0.01 mfd & x 0.1mfd.   S - Single decade resistance dial, having range x 0.01 ohms. P = Q - Fixed resistance having values of 1000 ohms each. L - Three unknown inductance is also provided. Inbuilt A.C supply of frequency 1 KHz, D.C supply of 3 volts and  Digital Null Detector for DC & AC balance is provided. 6 interconnection Leads with  4mm banana plugs, 3 unknown Inductances are provided on board. Comprehensive  User Manual will explain required results.         

By using this trainer, trainees can learn about KNX building automation technology quickly and easily with this simple, intuitive model.

• System dimensions: 1Ft. (L) X 1Ft. (W) X 1 Ft. (H)
• Electric supply: Single phase-230 V AC

With our capacious storage facility, urgent and voluminous requirements of the buyers are easily furnished by us. Our stringent quality procedures and analysis as per the guidelines help us in presenting reliable product range.   Features : Tough mechanism Compact model Easy to use Low maintenance cost Self explanatory systems Enhanced electrical safety Available with training manuals Inbuilt safety measures Safety against leakage Provision to give angular displacement Compatible with angular PLC trainer

• Group Name: Electronics Engineering Lab Equipments

Get in touch with us to purchase Diodes and Thyristors Power Circuit Trainer Kit. We have a decade of experience in this domain. We have an advanced manufacturing facility to bring forth the finest quality kit used for conducting experiments like V-I characteristics of the diode, SCR, and Triac. Using this kit can be used for designing single phase controlled rectifier circuit and three phase controlled rectifier circuit. We supply this premium grade kit all over the world.   Details : In this set up diodes and thyristors with power supply is very useful for different experiments like V-I characteristics of diode, SCR, Triac. Single phase controlled rectifier circuit and three phase controlled rectifier circuit can design easily on this set up. This control is feature packed with the latest advancements. The Kit Perfectly fabricated with the highest grade components, The Panel known for its high performance and accurate results.   Features : Different test points provided on panel at various stages in the panel. Built in IC based control circuit. Set of patch cords. Variable DC power supply. Details description of operation theory and proper guidance. Experiment - To Study V-I characteristics of diode, SCR, Triac To study Single phase controlled rectifier circuit and three phase controlled rectifier circuit   Specifications : Complete front panel display of components & power supply. Variable DC power supply 0 10v. Variable DC power supply 0  25v. Set of DIODEs , Thyristors, Triac. Set of resistive, capacitive and inductive loads. Three phase auto transformer . Three phase MCB with LED power indicator. Single phase controlled rectifier firing unit. Three phase controlled rectifier firing unit. Single phase step down transformer. Three phase step down transformer.   Accessories : Complete operating manual with details description. Patch cords and connecting wires

• Frequency Range: 1 Hz to 1 MHz in 6 Decade Range
• Dial Accuracy: 3% of Range
• Wave From: Sine & Square Wave
• Output Voltage: Sine Wave 0-10 V in 3 Decade Step of 10 V, IV & 0.IV with Consciously Variable control
• Square Wave 0-15 V P/P Continuously Variable: Sine Wave Distortion
• Less than 0.5% from 100 Hz to 100 KHz: Square Wave Rise Time
• Less than 100 nano seconds at maximum output: Square Wave Symmetry
• Duty Factor Variable From 0% To 80%: Output Impedance
• 600 Ohm 5%: Power

• Brand Name: Schuyler
• Code: Specifications
• S1187: Set with carry bag.

The ideal kit for engaging agility based training sessions.Each pack contains:• 6 x Training hurdles 12''• 10 x Hat shaped cones 9''• 40 x Space markers with stand 2''• 2 x Agility Ladders 4m

• Application: Laboratory, Electrical Lab Equipment
• Condition: New
• Brand Name: Edutek

Institutions Various Training Kits, Brass Bush, 1 PH Meter Test Bench

We design a quality range of consumer electronic trainers, which meet the requirements of our clients in the national and international markets. Having manual control operations, these trainers are available in different models. These find application in public utilities and telecommunication industry.

• Features: Excellent grade,Supreme reliability,Highly efficient,Long lasting durability

• Application: Laboratory
• Condition: New
• Power Source: Electrical
• Brand Name: Mechanics Optics & Digital Instruments Pvt. Ltd.
• Model: TK 06
• Warranty: 1 Year
• Feature: Durable

Advanced lab trainer for students to perform more than 50 experiments of digital electronics Compatible with optional ready to use experimental modules Glass Epoxy PCB used as front panel of 300mm x 220mm & mounted on light weight shock proof plastic cabinet On board power supplies, Function generator, and other input signals Bread board provided Supplied with connecting wires

• Model Number: UI-549
• Brand Name: UNICON

We are offering electricity trainer (et) trainer specification: 1. three number of bulb (6v, 0.3a). 2. one number of dpdt switch. 3. one number of continuity tester. 4. one number of 12vdc250vac relay. 5. one number of galvanometer (30-0-30), 20ua per division. 6. three number of potentiometers (25 ohm, 1k, 10k) 1w each. 7. one number of bread board (850 pins). 8. on board power supplies +12vdc and +5vdc (200ma each). 9. on board ac power supply 6vac, 1a. Accessories: 1. 1 number of electromagnetic core (u-i type) with main supply 230vac, 50hz and two coils (6vac and 12vac). 2. 1 number of electromagnetic core (e-i type) with main supply 230v, 50hz and six coils having number of turns and current (200 (swg: 21), 1a) (one number), (400 (swg: 23), 0.5a) (two number), (800 (swg: 27), 0.25a)(one number), (1600 (swg: 31), 0.125a)(1), (3200 (swg: 36), 0.05a)(1). 3. accessories component box (capacitor: 40, transistor: 02, diodes: 02, mains lead: 01, magnetic compass: 01, bar magnet: 01, multimeter: 01, screw driver: 01, connection patch cords: 25)

Built in Different Transistors ,Diodes, LEDS, Zener diodes,FETS, MOSFET, UJT, Resistors Bank, Capacitors, Inductors Built in 741 Amp 20pin Zik Socket Built in Power supply 0-30V/0.5 amps Built in DC±5V,±15V,9V-0-9V AC One Bread board Built in different values of Potentiometers Decade resistance box range with 100Ω to 1K Ω in 10 steps of 100 Ω each DC Voltmeter 2V/20V with Switch selectable DC Ammeter 200µA/2000µA with switch selectable DC/AC Ammeter/Voltmeter 200V,200mA with Switch selectable

Nvis 6561 Shift Registers Trainer is a compact, ready to use digital electronics experiment board. This training product has been designed specifically for students to study all the four types of 3-bit and 4-bit shift registers on a single board and verify their truth tables. A shift register is capable of shifting its binary information either to the left or right direction. The temporary memory storage and data shifting characteristics of shift registers make them extremely valuable for most digital electronics systems. Nvis 6561 has built-in clock source, logic high-low input facility and LEDs for visual indication of input-output logic states. Besides this, a +5V DC adaptor is also provided for power supply. Nvis 6561, Shift Registers Trainer is an ideal platform to enhance education, training, skills & development amongs our young minds. Product Features Stand alone system Easy illustration of all types of 3-bit and 4-bit shift registers LEDs for visual indication of input and output logic states SPDT switches for easy input logic selection e-Manual Scope of Learning Study of 3-bit and 4-bit serial in serial out shift register Study of 3-bit and 4-bit serial in parallel out shift register Study of 3-bit and 4-bit parallel in serial out shift register Study of 3-bit and 4-bit parallel in parallel out shift register

Code: EEW0002 Fuel Cell Technology Trainer. Fuel Cell Technology Trainer ManufacturerThe   Fuel Cell Technology Trainer allows the student to create a grid-independent power supply that uses only hydrogen as its fuel. The system familiarizes the student with fuel cell power supply technology, an environmentally friendly method of generating power directly from a hydrogen reaction. Fuel cells are the most promising alternate energy supply and are already being used in a number of areas, including automotive engineering and power generation systems. The can also be connected to an external energy source, such as a solar panel or wind generator, for comparison between the different technologies. A switch located on the panel allows for switching between the fuel cell and an external source

• Brand Name: Eletech Lab Instruments
• Model No: ELI-254
• Usage/Applications: For Educational Purpose
• Cabinet: Shock Proof ABS Cabinet
• Sockets: 2mm
• Power Requirements: 230V AC
• Frequency: 50Hz
• Standard Accessories: Patch Cord & Instructional Manual

We cater to the needs of engineering students at college and university level with all kinds of Electronic Trainers & Kits made of highest quality components and PCBs. We procure training kits from well-known vendors to ensure the best products for our clients. Our aim is to deliver scientific educational products sound in structure, working and presentation.

Frax’s value-added Educational Electronic services offer best instruments to enhance the durability and educational value for the customers. In addition, Frax’s talented staff of Service Engineers and Sales Staff bring many years of experience in service and manufacturing. Frax's diversified technology, products and services are the result of ongoing innovation, creativity and solid business leadership.