Epoxy Base Mortar Dealers

High strength Epoxy Repair Mortar (High early and ultimate strength, non-shrink and excellent adhesion to concrete, steel, etc).  For Rehabilition of concrete structures like precast segments, structural elements like columns/ beams, etc., Speedy repairs of industrial floors/ pavements.

• Color: White

Epoxy Mortar is widely used for Acid Resistant Bricks & Tiles lining works as Bedding & Jointing Mortar for Tanks, Floor, Drain, Foundation, Chemical Reaction Vessels, and Neutralization Pit etc. Resistant It is resistant to Non-Oxidizing Acids, Alkalies, Salt, Detergents, Oils, Greases and some solvents. Resistant to temperature 90° C (Max.)

• Color: Black, Grey, Etc.
• Packaging Size: 5-10 Kg
• features: Offering high bond strength, Provides for durable smooth underlay, Provides for superior bonding to most substrates, Self smoothing for providing ideal finish
• Packaging Type: Bucket
• Usage/Application: Construction
• Brand Name: Adhere
•  :  

• Country of Origin: Made in India
• Conpro EP-3: solvent free
• resistant: most acids, alkalies, grease, fuels, minerals oil etc
• Usage: Epoxy screed flooring in industries for high mechanical wear & tear

• Coverage: 1.5 Kg/m2 per Mm of Thickness
• Appearance: Grey in colour, Ready- Mixed
• Shelf life & storage: 6 Months In The Original Packaging In Dry Environment
• Mixing Water: 5.6 to 6.4 liters / Bag of 25 Kg EN 12706
• Pot Life: > 45 Min.
• Gel Time (Self-Leveling): > 40 Min.
• Temperature Range For Application: From +5 °C to +30 °C
• Thicknesss: > 1mm
• Max. Thickness Obtainable: < 30 mm
• Fool Traffic *: 3 Hours
• Ceramic Tiles: 12 hours
• Parquet: 24 hours
• Adhesion To Concrete After 28 Days: ≥ 1.5 MPa , EN 13892-8
• Compressive Strength After 24 Hours: ≥ 10 Mpa, EN 13892-2
• Compressive Strength After 7 Days: ≥ 25 Mpa , EN 13892-2
• Compressive Strength After 28 Days: ≥ 30 Mpa , EN 13892-2

• Application: Industrial
• Density: 450-550g/L
• Screed Thickness: 1.5 to 3 mm
• Tack Free Time: 3 hours at 25 DC
• Pot Life: 45 min at 25 DC
• Use: Tile Fixing, Joint Filling

• Material: Epoxy
• Form: Paste
• Brand Name: Corrosol Industries
• Mixing Ratio by Wt: 1.5
• Max. Temp. Resistance deg C: 90 deg C
• Bulk Density: 450-550 gm/L

We are offering quality Epoxy Resin Mortar to our valued clients. Epoxy Resin Mortar can be used to repair concrete damaged due to chemical attack and for repairing areas subject to high impact or tensile loads. Epoxy Resin Mortar has high chemical resistance, rapid strength gain and high strength. We offer Epoxy Resin Mortar in different quantity to cater diverse demands of the clients.Advantages : Prepacked – Proportioning errors avoided Chemical resistance – High performance even in chemically aggressive environment Rapid strength gain – repaired areas serviceable quickly High strength – Abrasion, impact, tensile Our branded product : EP Screed Bond – M

• Packaging Size: 50 kg
• Material: Epoxy
• Country of Origin: Made in India
• Brand Name: Mr Bond Polychem
• Usage/Application: Concrete Repair
• Coverage Area: 1 square metre
• Thickness: 4-5 mm
• Packaging Type: Carboy
• Features: Reliable, Precise pH value, Highly effective

• Application: Flooring
• Material: Cement
• Color: Brown
• Country of Origin: Made in India
• Usage/Application: Construction
• Packaging Type: Bag
• Flexural Strength: 150 kg/cm2
• Water Absorption: 1%
• Maximum Temperature: 60 C
• Setting Time: 8-10 hrs.
• Bond Strength: 10 kg/cm2
• Compressive Strength: 500 kg/cm2

EPOXY BASED MORTAR - This is a polymer-based bonding paste used in agglomerate installation in the construction industry. The paste is a mixture of materials such as epoxy resins, solvent, binder, mineral fillers and some additives in certain measurements depending on the desired properties after curing. It is used as an adhesive and paste for structural repair. It can also be used to fill gaps, cracks and vents in driveways, patios and plazas. In setting tasks, it is used for tile installation where sealers are not required.

• Density: 1500 kg/rd
• screed thickness: 1.5 to 3 mm
• Pot Life: 45 min at 25 DC
• Tack Free Time: 3 hours at 25 DC
• Initial/ full cure: 6 hrs17days at 25 DC
• Shelf Life: 6 months
• Flash Point: Over 2000 C
• Service Temperature: -20cC 60 JC

Self Levelling Epoxy based MortarColor Screed an easily cleaned and hygienic surface with excellent resistance to chemical and mechanical attack provided as a thin layer topping underlayment for FloorClad epoxy toppings. The mixed mortar can easily be laid by trowel to a joint less, abrasion and chemical resistant topping. Where situation demands, the aggregate content can be reduced to yield a self-sealing mortar.

• Brand Name: PERMA

Perma Master Floor - SL is a three components epoxy resin based mortar for application to a variety of subfloors as a joint less, thin, self-leveling topping. Perma Master Floor - SL quickly provides a permanent, hard wearing chemical resistant finish for floors and corridors subject to pedestrian and light wheeled traffic. it provides a smooth, hygienic and dust free floor that can be easily cleaned. Primary Uses : To provide a seamless, hygienic, self-leveling floor topping for areas subject to pedestrian and light wheeled traffic. Advantages : High compressive, flexural and tensile strengths in excess of concrete Available in range of attractive colours Brown, Green, Blue, Grey, etc Chemical Resistant and waterproof. Hygienic and non-dusting Easy to use, easy to clean Epoxy based, supplied in pre-weighted units Will not support bacterial growth Packing : It is supplied in 5 kg and bulk in pre-weighted units.

• Packaging Size: 50 kg
• Material: Epoxy
• Color: Grey
• Usage/Application: It can be used as bedding and jointing material for brick/tile.
• Packaging Type: HDPE Bag
• Features: Acid proof

• Packaging Size: 25 Kg
• Material: Cement
• Usage/Application: Construction
• Coverage Area: All India
• Coverage: All India
• Packaging Type: Bag
• Features: Long life, Maintenance free, Low cost of labour

We offer Epoxy Based Mortar for Flooring, Lining & Patch Repair. Description: conpro ep-3 is a solvent free, epoxy resin based mortar for screeding, repair and improvement of concrete structures. In cured condition conpro ep-3 is a hard, tough with very high mechanical strength, high impact and abrasion resistance. It is resistant to most acids, alkalies, grease, fuels, minerals oil etc. scope of use:epoxy screed flooring in industries for high mechanical wear & tear.lining of storage tanks of chemicals which are corrosive in nature.bedding mortar for a.r (acid resistance) tile lining etc.patch repair/pothole repair of all thicknesses.

EPOXY BASED MORTAR - This is a polymer-based bonding paste used in agglomerate installation in the construction industry. The paste is a mixture of materials such as epoxy resins, solvent, binder, mineral fillers and some additives in certain measurements depending on the desired properties after curing. It is used as an adhesive and paste for structural repair. It can also be used to fill gaps, cracks and vents in driveways, patios and plazas. In setting tasks, it is used for tile installation where sealers are not required.  

• Packaging Size: 50 kg
• Material: Mortar
• Country of Origin: Made in India
• Usage/Application: Block Jointing
• Packaging Type: Drum
• Shelf Life: 12 Month

• Packaging Size: 15 Kg
• Packaging Type: Bucket
• Shelf Life: 6 Months
• Bulk Density: 450- 550 gm/L
• Maximum Temperature: 60 Degree C