Explosion Vent Dealers

• Shape: Rectangular , Circular
• Features: easy installation and cost savings, Non-fragmenting, High integrity composite design, FDA compliant materials.
• Burst Pressure Range: 100 mbar g
• Burst Pressure Tolerance: + 0.25 psig for burst pressure < 1.5 psig + 0.36 psig for burst pressure > 1.5 psig and < 3.6 psig+-
• Brand Name: Fike
• Model Name: Sani VS, CV , CV-S , HI-CV , VV-S
• Maximum Operating Pressure: Up to 80% of the minimum burst pressure

• Shape: Round
• Material: Stainless Steel
• Brand Name: Fike
• Burst Pressure Tolerance: +/- 0.25% PSIG
• Process Temperature Range: -40 to 500 Deg F
• Material Grade: SS 316

• Material: SS
• Shape: Round
• Burst Pressure Range: 0.3 Psig
• Burst Pressure Tolerance: +/-0.25 Psig
• Size: 8inch
• Usage/Application: Explosion Protection
• Brand Name: Ventil

• Shape: Rectangle, Round, Square
• Material: SS304, SS316, SS316L, Alumnium, Inconel, Nickel.
• Brand Name: Flammer
• Certification and Compliance: NFPA 68, ATEX, FM
• Burst Pressure Rating: 0.010 bar g (100 mmwc) to 0.800 bar g (8000 mmwc)
• Size: 100 mm to 2000 mm

• Material: SS
• Country of Origin: Made in India
• Burst Pressure Range: 0.25 - 1 Bar G
• Burst Pressure Tolerance: +/- 15 mbar G
• Brand Name: Flammer
• Size: 760 X 305 mm (WxH)
• Surface Treatment: Powder Coated

• Material: SS316/ SS304
• Country of Origin: Made in India
• Diameter: 15 mm to 1100 mm
• Burst Rating: 0.1 to 2000 barg
• Features: Sturdy construction, High strength, Maintenance free.
• Burst Pressure Range: 100 mbarg
• Burst Pressure Tolerance: +/- 25 mbarg

• temperatures: 2000°F/1093°C

An explosion can result from an ignition of a combustible gas, mist or dust when mixed with air during processing, handling or storage operations. A rapid rise in pressure occurs in the containing structure, and if it is not of adequate strength to withstand the deflagration pressure, extensive damage and injury to personnel can occur. Explosion vents are low burst pressure membranes of calculated area fixed over an opening on the structure to be protected. In the event of a deflagration the vents provide a rapid and unrestricted opening at a predetermined burst pressure (Pstat) allowing combustion gases to expand and flow through the open vent. The required relief area necessary to protect plant or equipment may be determined by using the most current standards of NFPA 68 or VDI 3673.

• Features: Effective, Highly demanded, Efficient working

explosion vent, PTFE Hoses, PTFE Lined Pipes, ptfe pipes, rupture disk

explosion vent, PTFE Hoses, ptfe pipes, ptfe rupture disc

ØTypes: Inline and End of Line Flame Arrestor. ØCMRI Certified IS:16484 2016. ØGas Group: IIA, IIB1, IIB2, IIB3. ØSizes: 1’’,1.5’’,2’’,3’’,4’’,6’’,8’’. ØEnd Connection: Flanged to ANSI B16.5 #150 RF. ØBody Material: CS, Stainless CF8, CF8M. ØCorrugated Matrix in SS316, Hastelloy C276. Provide ATEX Certification on request.

Explosion Vents, Rupture Disc, fire sprinkler systems

Transformer Explosion Vent, transformer breather

Explosion Vents, rupture discs

Explosion Vents, Rupture Disc

explosion vent, Transformer Winding Temperature Indicator

Explosion Vents, Rupture Disc

explosion vent, on load tap changer, Off circuit tap changer

Explosion Vents, expansion joint covers

explosion vent

Explosion Vents, High Voltage Bushings, lv bushings, Earthing Boss

Explosion Vents, Honing Stones, Linestat Satellite System, Rupture Disc