Fabric Mercerizing Machine Dealers

We are Pali(India) based entity and actively involved in offering nothing short of the best quality products in the market. We are working in close coordination with the management and team members; they follow strict warehousing norms. We are able to keep the whole batch away from diverse damaging factors including sunlight, dust, moisture and rain.

Just like falling autumn leaves spreading itself all over the ground, the smallest detail is sprinkled over yards and yards of fabric. This technique of overlaying a small pattern over the entire length of the material is achieved by using rotary machines.

Mercerising can be done at different stages during the pre-treatment process. This could be after De-sizing or after Scouring or after Bleaching. When done after desize-washing, it induces maximum lustre onto the fabric. However, contamination of lye can occur, which reduces life of the caustic lye. High degree of whiteness can be achieved if the bleaching process is done after mercerisation. Mercerisation after scouring and bleaching prevents contamination of caustic lye but effects the whiteness and absorbency. Mercerising can be done either on wet fabric with a lye concentration controller or on dry fabrics. Mercerising could be done with either cold lye or with hot caustic.                   CHAINLESS MERCERISING RANGE (MODEL - M)         Salient Features         1. Modular design, tailored to suit individual requirements. 2. Low width shrinkage with excellent dimensional stability. 3. Mercerised fabric has excellent lustre, high absorbency, better handle, uniform and repeatable finishing results. 4. Can be equipped with PLC controls for different functions such as fabric tension in Impregnator and Stabiliser, Shrinkage-Controller-cum Indicator etc. pH Indication / Control at the end of Washing, dwell time control by controlling speed flow control for walls & NaOH concentration control etc. 5. Lower Lye, Water and Steam Consumption. 6. Low maintenance. 7. Lower quantity of re-dyeing requirements.

Caustic Soda Fabric Mercerizing machine / Weight reduction is more than a simple process for improving drape, soft hand and achieving a silk like depth of luster. Weight reduction treatment by extracting polyester form the surface of the fiber to form micro cavities causes a reduction of fabric weight. The purpose of our Weight reduction machine is to add quality and value to polyester fabrics. To achieve comfort, soft hand, drape, transpiration, soil-release effect, electrostatic conductivity, moisture absorbency. elimination of synthetic fiber-gloss complete uniformity and repeatability with auto system. simplicity of operation full control of the parameters which influence the process. Saving of dyestuff in subsequent processing. increased penetration of printing paste, improves response to sue-ding or raising.   Technical Specification :

Mercerising can be done at different stages during the pre-treatment process. This could be after Desizing or after Scouring or after Bleaching. When done after desize-washing, it induces maximum lustre onto the fabric. However, contamination of lye can occur, which reduces life of the caustic lye. High degree of whiteness can be achieved if the bleaching process is done after mercerisation. Mercerisation after scouring and bleaching prevents contamination of caustic lye but effects the whiteness and absorbency. Mercerising can be done either on wet fabric with a lye concentration controller or on dry fabrics. Mercerising could be done with either cold lye or with hot caustic.   FABRIC FEEDING   Fabric feeding through Guiding and Centering devices. Positively Driven Batching-off unit with / without J scray for low tension and continuous working. Combination of three individually easily adjustable Curved Bar Rubber Expanders to feed Fabric in stretched condition.   LYE IMPREGNATOR   Made from Stainless Steel unless otherwise specified. Caustic lye impregnation with rollers dipped in lye as well as by caustic filled nips formed between top and bottom rollers. Grooved Bottom Rollers for better width stability. Dwell time control by speed adjustments. Driven rollers at regular intervals can be supplied for tension control. Can be equipped with chiller / heater for lye temperature control. Equipped with automatic / manual continuous filtering arrangement. Automatic fresh lye addition to maintain uniform caustic lye consistency to pre-adjusted concentration.     IMPREGNATOR WITH DWELL ZONE Mercerisers Model M-10 and above have the Impregnating zone subdivided into a Impregnating zone and a Dwell Zone. It is possible to use caustic lye in all sections or use caustic lye in the first Impregnator and use the second as a dwelling zone. For specific fabric tension requirements, drive to the intermediate bottom rollers can be provided to reduce tension in the fabric under process, ensuring better control on width.     TENSION CONTROLLED DRIVE Facility to over-feed fabrics to ensure better width stability. Programmable / pre-set speed between various individual drives. Multi-point Variable Frequency Drive with encoders to maintain uniform tension. Constant fabric tension.     STABILISER Excellent cascading throughout the passage in Stabiliser. Intensive Neutralisation with the help of fast liquor circulation in each cascade. Grooved Bottom Rollers for better width stability. Precise temperature control near boiling point guarantees best caustic removal from fabric. Excellent dimensional stability after stabiliser. Constant and uniform concentration of overflowing wash liquor.     SQUEEZING AFTER IMPREGNATOR / STABILISER Nip formed with Wear resistant Stainless Steel / Ebonite roller and special Rubber Roller for excellent caustic removal and longer life. Adjustable nip pressure upto 30-50 kg-cm. Automatic opening of nip when machine stops. Drive through direct-coupled Motor-Gearbox with Variable Frequency Drives.     WASHING Various options and combination of wash boxes are available depending on fabric quality like STN 18 for Normal woven fabrics / STN-25 CP for heavy fabrics / Drum washer for delicate fabrics. Precision control can be achieved with load cell and encoder for closed loop tension control to prevent linear and width shrinkage. Minimum water consumption through excellent counter-current water flow between washing sections. Intensified Washing action with elevated temperatures and counter flow of wash liquor. Powerful interchange between wash liquor and fabric with fast liquor exchange in the fiber. Highly efficient removal of residual caustic. Highest washing efficiency at all speeds.     SQUEEZING AFTER WASHING Each Washer is equipped with: Intermediate Squeeze Nip for bath separation. Low tension crease-free fabric movement. Fabric Expander before ni p. Stepless pressure regulation. Final nip is heavy duty, high pressure and of special design for excellent and uniform extraction throughout the width. Drive through direct-coupled Motor-Gearbox with Variable Frequency Drives.         LIQUOR CIRCULATION A suitable pump with a filtering arrangement is provided in the Impregnator, which delivers the filtered caustic lye back into the Impregnator through a distribution system located between each Roller. On request, the machine can be equipped with a continuous auto cleaning filter. The stabiliser is compartmentalised and each compartment is provided with a Stainless Steel Pump which collects the hot wash liquor from the first washing compartment and pumps it to the last section of the stabiliser. This liquor is spread onto the fabric. Similarly from this last section, the liquor is collected, filtered and pumped to the preceding section. This continues till the first stabilising section, where the accumulated liquor is taken for recovery / disposal. The flow of liquor in the direction opposite to the movement of the fabric ensures excellent removal of caustic.     SALIENT FEATURES • Modular design, tailored to suit individual requirements • Grooved Bottom Rollers for better width stability . Low width shrinkage with excellent dimensional stability . Mercerised fabric has excellent lustre, high absorbency, better handle, uniform and repeatable finishing results . Can be equi pped with PLC controls for different functions such as fabric tension in Impregnator and Stabiliser, Shrinkage-Controller-cum Indicator etc. pH Indication / Control at the end of Washing, dwell time control by controlling speed flow control for walls & NaOH concentration control etc. . Lower Lye, Water and Steam Consumption . Low maintainance . Lower incidence of re-dyeing       ACCESSORIES WET-ON-WET The SWASTIK Merceriser can be provided with a NaOH preparation tank, chilling arrangement for the lye and a caustic recovery plant, if required. The machine can be supplied with acid neutralization system in the washer and a Dryer. WET-ON-WET MERCERISING Desize Impregnated Fabric can be Mercerised right away in our Wet-on-Wet Merceriser WWM-X. The number of Washing Compartments depends upon the quality of fabric and the production required. In cases where the fabric is Mercerised after Scouring, Wet-on-Wet mercerising is possible using only one Pre-wash Tank. Washing after mercerising remains standard. A heavy duty Squeeze Nip "Hi-Squeeze" with anti-deflection roller prior to the Impregnator enables uniform mercerising results. Impregnator for Wet-on-Wet Merceriser is equipped with an automatic Lye concentration controller. HOT MERCERISING Being a cost effective measure, the tendency to use Hot Mercerising is on the increase in recent years. Hot Caustic lye (at about 60°C) penetrates better and more evenly to the yarn core (of the fabrics). Swelling is better as compared to cold Mercerising which helps to improve the dimensional stability of fabrics. Hot Mercerising ensures even Dye penetration and imparts a softer handle and better appearance. Shorter impregnation time requirement reduces investment cost. For Hot Mercerising, the Impregnating section is equipped with an indirect steam heating system with a temperature controller to maintain uniform temperature. THE COLD IMPREGNATION PROCESS The traditional cold impregnation process imparts more lustre to the fibre than the hot impregnation system mainly due to the greater shrinkage and high tensions needed the re-stretch the fabric to the desired width. WIDTH STABILITY can be achieved by differential speed setting of the squeezing units, controlling the shrinkage or elongation of the fabric. This can be done manually or through automation, using PLC. COMBINED CHAIN AND CHAINLESS MERCERISER Besides Lustre, Depth of Colour and fabric feel, dimensional stability of the fabric is the most essential objective of mercerization today. These can be fulfilled with the Combined Chain and Chainless Merceriser. The length and width of the fabric can be controlled at will (within physical limits) using the combination of Chainless driven rollers with fully controlled drive and a stenter frame. The layout of the machine is shown in the layout drawing below. The intensive impregnating zone is followed by a reaction zone. Up to this point the fabric guidance is on the chainless princi ple. A part of the stabilizing zone is a stenter section using the pin chain princi ple. Final stabilization compartment is again chainless and is followed by the normal high-efficiency washing and neutralizing compartments. In the Stabilizing Zone, the uniformly applied lye is removed. Hot weak lye is first sprayed onto the fabric. Gradually reducing the shrinking force. In this condition the fabric can be stretched to the desired width with a comparatively less force. The possibility of stretching on the stenter ensures uniform shrinkage and even distance between warp yarn from the selvedge to the center. This is an important advantage of the Combined Chain and Chainless Merceriser if dyed woven or striped fabrics are to be processed. Increase in fabric width can also be achieved. The pin chain permits stretching by increasing the speed or shrinkage through fabric overfeed.     AUTOMATION SWASTIK offers a fully automated machine with the most modern PLC control system which ensures optimum production. The level of automation can be designed for specific requirements of individual customers. Typical level of automation to access and control basic machine parameters, functions and displays using PLC with Graphic Colour Screen Display of various functions on a Touch Screen, can be as follows:   • Drive synchronisation • Automatic Speed Control of machine through programmed Dwell time • Lye Dosing and concentration control as per set parameters • Liquor/Water Flow proportionate to fabric weight • Level control • Temperature control • Fabric Tension control by overfeeding in the Impregnator and Stabiliser • Acid Dosing with pH control.   The system can be interconnected to a host computer or to other PLC for networking or data monitoring. Remote access of the control system is possible through use of a modem connected to the PLC.   Automatic operation and control with necessary sensors provide extremely efficient operations. Lye concentration and dwell time control with perfect temperature regulation, ideal water flow regulation, level control etc. provide for excellent mercerising effect. A pH controller helps achieve neutral fabrics before drying and a Moisture Controller prevents unnecessary over-drying of the fabrics.

• Brand: JDENGINEERS
• Machine Type: Semi-Automatic, Automatic

• Machine Type: Automatic, Semi-Automatic
• Brand Name: Palod
• Feeding Mode: Heavy Fabric - Single Layer, Light Fabric - Double Layer
• Working Width: 1200 to 3200 mm
• Roller Width: 1400 to 3400 mm
• Fabrics: Woven Fabrics made of Cotton
• Mercerizing Technology: Chainless - Hot Mercerizing
• Fabric Speed: 10 to 40 mtrs/min

• Voltage: 220-240V
• Brand Name: Beekey Corporation
• Power Consumption: 3 Kw
• Frequency (Hz): 50 Hz
• Phase: Single Phase

• Color: Brown, Green, Grey, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Power: 0-5Kw, 10-15Kw, 15-20Kw, 20-25Kw, 5-10Kw
• Warranty: 1yrs, 2yrs, 5yrs
• Machine Type: Automatic,Semi Automatic,Manual
• Power Source: Electric,Mechanical

• Brand Name: Prabhat Textile Corporation
• Machine Type: Semi-Automatic
• Feeding Mode: Heavy fabric -Single layer
• Light Fabric: Double layer
• Fabric speed: 10-40 meter/ min
• Roller Width: 1400-3500 mm
• Mercerizing Technology: Chain less- hot mercerzing

A wide range of Melange Heather Yarn accepted and repeatedly used by our customers includes black and various shades starting from 1% to 60% :

fabric mercerizing machine, fabric bleaching machine, Guide Rollers

yarn mercerising machine

fabric mercerizing machine, Fabric Reversing Machines

mercerizing machine, vegetable juice, Fertilizer, wiring services

Hank Yarn Mercerising Machine, Hank Yarn Mercerising Machine

fabric mercerizing machine, Fabric Knitting Machines

merceriser machine, Drum Washer, Open Jigger, fabric finishing machines

fabric mercerizing machine

fabric mercerizing machine, Baby Felt Calender Machine

Fabric Mercerize Machine, textile trolley, Textile Poly

merceriser machine, textile central machine, Textile Machinery

mercerizing machine, Dyeing Machine, Jet Dyeing Machine, Stenter Machines

mercerizing machine, Core Shooter, Sponge Iron Plant Automation

mercerizing machine, Solvent Base Lamination Machine, pvdc coating machine

merceriser machine, Stenter brush, textile trolley, Textile Pin Plate

fabric mercerizing machine

mercerizing machine, Dyeing Machine, Rotavator, thresher machine