Emergency Exit Doors
Get Price Quote
50 Piece(s) (MOQ)
Blessings for personels to escape safely saving their lives in accidents.These doors are manufactured as per very high safty standerds. Available in many sizes or as per architect design.
Fire Resistant Doors
38,000 Per Piece
1 Piece (MOQ)
Best Deals from Fire Doors
Fire Door
10,000 - 50,000 Per piece
1 Piece (MOQ)
Double Leaf Fire Rated Doors
30,000 Per Piece
10 Piece (MOQ)
Fire Rated Door
Get Price Quote
5 Piece (MOQ)
Fire Shaft Door
Get Price Quote
1 Piece (MOQ)
Fire Rated Door
42,000 Per Piece
1 Piece (MOQ)
Fire Rated Doors
24,000 Per piece
10 Piece (MOQ)
Flameless explosion venting
Get Price Quote
10 Piece (MOQ)
Fire Shaft Door
Get Price Quote
Boiler Fire Door
Get Price Quote
Circular Flat Explosion Vent
Get Price Quote
1 Set (MOQ)
Fire Shaft Doors
Get Price Quote
1 Piece (MOQ)
Fire Shaft Doors are used to store the firefighting equipment like Fire Hose Reels Drum, Hydrant Landing Valve, RRL Hose Pipe, Branch Pipes etc. These cabinets provide best protection from the environmental damage to the fire equipment.
fire rated window
Get Price Quote
1 piece (MOQ)
fire resistant door
4,500 Per Carton
1 Square Meter (MOQ)
We deal in Fire resistant door with proper fire certificates with with 60 to 120 minutes.These fire doors are made of composite and are fully insulated as well as lightweight.
Single Leaf Door
Get Price Quote
1 Piece (MOQ)
Fire Rated Door
Get Price Quote
1 Unit (MOQ)
Fire Rated Door / Exit Door Our range of products include Fire exit door, Fire rated steel exit door, Emergency Exit door, Fire Exit Doors, Emergency escape door and Egress door. Fire Proof Doors, 2 Hr Fire Rated Door. Our product range also comprises of Steel Door, Stainless Steel Door and Fire Rated Steel Doors.
Boiler Fire Door
Get Price Quote
1 Piece (MOQ)
Wooden Fire Door
20,000 - 80,000 Per Piece
1 Piece (MOQ)
Fire Rated Door
Get Price Quote
These doors an be used in high-rise buildings, metro railway stations, teleoom centres, power plants, cellular network stations, garment processing unlls, shopping malls, industrial plants, multiplexes, hotels, auditoriums, software parks, restaurants etc. These doors and frames are designed to perfonn in lhe most demanding environment.Doors are tested at N'|'L (National Testing Laboratory) CBRI (Centn-1| Building Research Institute) ARAI (Automotive Research Association of India) Standards & Certifications All our doors are tested under |S4020Part1-12&16 redoorsaretestedasperlS3614Part2& BS 476 Part20 &22 Tesiedto ULiOCand cnnfirmingtn NFPA80 Doors are tested at - NTL (National Testing Laboratory), CBRI (Central Building Research Institute) Features Available in galvanised or stainless steel Honeycomb/RockwooVM|neral wool core in-fill for structurally flat surface Shutterthickness of 01)46m Fire rating of ‘I20 minutes for stability and integrity (IS/BS) ULlabel|ed doors for 90 mlnuts Clear vision lite up to 120 minuitesfire rating No welding joints and sharp edges, interlocki ng at the stiles Factory prepped to receive all Mortise hardware spedfied High aesthetics and robust structure Fullyflush constructions Easytzo install on a flush wall opening and dry wall partitions Can be supplied in a wide range of colours Optional Features Insulated doors with 120 minutes of rating (BS) Wood grain can be provided as an optional finish Tested no ULIOC and confirming to NFPA 80 Fre doors are tested as per IS 3614 Part: 2 and BS476 part 20 and 22 Double doors and doors with vision lite are tested for both 60 and 120 minutes Doors are tested at CBRI (Central Building Research lnstituteiand ARAI (Automotive Research Association of India, a research institution of the automotive industry with the Mlnlstryof Heavy Industries and Public Enterprises, Govemment of India)
Fire Shaft Galvanized Iron Door
6,000 Per piece
5 Piece (MOQ)
Wooden Fire Door
2,500 - 4,500 Per Feet
-1 Piece(s) (MOQ)
Fire Resistant Metal Door
3,000 Per piece
5 pieces (MOQ)
Metal Fire Doors
Get Price Quote
We are a prestigious Manufacturer, Exporter, and Supplier of Metal Fire Doors. We manufacture heavy-duty Metal Fire Doors that are quite sturdy and ideal to be used in boilers, furnaces, and other high temperature environments. The door is finely painted and finished using abrasives to look great. Our Metal Fire Doors are easy to install and can be availed at reasonable prices.
Fire Steel Door
15,000 - 50,000 Per Piece
10 Piece (MOQ)
fire resistant door
480 Per Square Feet
21 Square Feet (MOQ)
United Enterprises is a trusted fire-resistant door supplier, providing top-quality solutions for your safety needs. Our fire-resistant doors are made to endure high temperatures. They guarantee the highest level of safety in the event of a fire. We always utilise the best materials to provide outstanding safety and durability. To ensure they satisfy international fire safety requirements, our doors undergo extensive testing. For commercial, industrial, and residential uses, they are perfect. By preventing the spread of fire, the fire-resistant doors provide safer surroundings. They can meet any architectural need because they come in a range of sizes and finishes. We provide bespoke designs to meet certain safety requirements. In times of crisis, United Enterprises promises dependable performance. Before being delivered to our clients, our items go through stringent quality control procedures. In every product, we put safety, dependability, and aesthetic appeal first. To guarantee correct setup, our knowledgeable staff provides installation services. We promise to provide timely assistance and service. If you want reliable, certified fire-resistant doors, go with United Enterprises. Protect your people and property with our cutting-edge fire safety solutions. Trust United Enterprises, the top provider of fire-resistant doors, for enduring security. To find out more about our fire-resistant door options and installation services, get in touch with us right now.
Fire Door
40,000 - 55,000 Per piece
2 Piece (MOQ)
Door Frame :- Supply of 140 minute fire rated of Hard wood / Red Mirantee door frame of section 120mmX65mm with heat activated incumescent fire seal strip of size 10mm X 4mm and one coat of anti-termite fire retardant primer.Door Shutter :- Supply of Envirotech make120 minute fire rated Wooden Door Shutters as per IS-3614 Part-2 and BS 476 PART-2 for single & double leaf doors duly tested from CBRI Roorkee or from laboratory approved by engineer in charge with 55mm thick asbestos free composite fire / smoke check wooden shutter of 120 minute fire rating comprising of two 10mm thick calcium silicate boards, 100% without asbestos , having density not more than 1150 kg/m3 and thermal conductivity 0.14 W/m*K sandwiching 25mm thick fire resistance insulation mineral wool filler coated with FR silicon sealant and faced with 3mm thick commercial ply facing on both side with heat activated intumescent fire seal strip of size 10mm X 4mm mounted in the grooves of hardwood lipping on all side except bottom.
Teak Wooden Fire Rated Door Frame
7,640 - 8,600 Per Piece
350 Piece (MOQ)
All products have the option to include laminates and veneer pressing, which is chargeable. We can manufacture products in different sizes based on your requirements
Fire Door Inspection As Per IS 3614-1
35,000 - 45,000 Per piece
CDG is a leading Organization in India. Steel Plate Doors a).The door shall be of steel plate not less than 6 mm thick, with stiles and rails ( and muntins where necessary } on each face of the plate not less than 100 mm in width and 6 mm thick, riveted together with rivets not less than 8 mm in diameter or welded in accordance with IS : 823-1964^ and spaced not more than 150 mm apart, dividing the door into panels not exceeding 08 m^ each. Except as provided in 6.1.4.1, the stiles and top and bottom rails shall be set close up to the edge all round the door on both faces making the door not less than 18 mm thick continuously along each edge b) steel plate not less than 6 mm thick, stiffened all round one face at the edges with T-bai- not less than ISN'FSO and further divided into panels not exceeding 0"8 ni- each b T-bar of similar section, all riveted or welded as specified. Hinged Type Doors If the opening exceeds 105 m in width, the door shall be in two leaves, (neither of which shall exceed 1"05 m in width) so constructed that a rebated joint not less than 12 mm wide is formed at the meeting stiles when the door is closed. The door or leaf shall not be subdivided into parts hinged together. The door shall be hung on substantial hinges or pivots. There shall be on each leaf a central hinge, or a substantial iron lug or spur which will tie or grip the door to the frame when the door is closed. The door shall have bolts at top and bottom ( or if in two leaves there shall be a bolt at the top and bottom of each leaf), and there shall also be a central bolt or latch. The bolts and latches shall be so arranged that the door can be opened from either side. Each bolt shall fasten into or engage the frame or a socket to a depth of at least 6 mm. The latch shall engage the frame or a catch to a depth of at least 12 mm. In the case of a door in two leaves the central bolt or latch on one leaf shall fasten into or engage a socket or catch on the other leaf for at least 12 mm depth. Sliding Type Doors The door shall be in one leaf. The door shall be hung from the top by supporting wheels fitted in steel hangers of substantial design, extending at least 400 mm down the door \inless designed with a double strap, in which case the\ need not extend more than 300 mm. Hangers shall be riveted to the door, If the door exceeds ]-5 m in width, not less than three hangers each with a wheel shall be fitted. Supporting wheels and pins shall l)e of steel. It is necessary that wheels of low fiiction type shall be used. The rail upon which the supporting wheels riui shall be a flat bar of steel at least 75 X 16 mm in section; or a rolled steel T-bar at least 75 X 50 X 12 mm in section; ar an angle at least 65 X 65 X 12 in section on which a steel runner bar 16 X 16 mm in section fixed by rivets at 225 mm centres to carry grooved supporting wheels. A frame of steel not less than 6 mm thick at any point for fitting into the opening with bolts or keys not more than 750 mm apart, with at least three on each vertical side, shall be provided. Along the top, the bottom and the side into which the front vertical edge of the door closes, the frame shall be of channel bar at least 35 mm deep, and the door shall house into the frame to this depth.
Fire Door
15,000 - 30,000 Per piece
100 piece (MOQ)
Buy best quality fire door low price 1 hr 60 and 2 hr 120 minutes fire resistant place rated wood doors in India. Fire proof door made of wooden composite panel with high performance light weight low thickness. What is Fire Door? Fire door is a door with a fire-resistance rating used as part of a passive fire protection system to reduce the spread of fire and smoke between separate compartments of a structure and to enable safe egress from a building or structure or ship. A strong wood frame, an intumescent seal around the door's edges, fire-resistant glass, fire alarms, and devices at the doors that automatically close are just a few of the components that make up this structure. The intumescent seal expands as the temperature increases and covers gaps between the door and the door frame. Wood fire doors are specially designed doors that provide fire resistance and help prevent the spread of fire and smoke within a building. They play a crucial role in maintaining the safety of occupants and protecting property during a fire emergency. Features of Wood Fire Doors Fire Resistance Rating: Wood fire doors are rated based on the duration they can withstand fire, typically ranging from 30 minutes (FD30) to 60 minutes (FD60) or more. The rating indicates the door's ability to resist fire and prevent its spread for the specified period. Intumescent Seals: These doors are equipped with intumescent seals that expand when exposed to high temperatures, sealing the gaps around the door to prevent the passage of fire and smoke. Heavy-duty Hinges: Fire doors are fitted with heavy-duty hinges that can withstand high temperatures without deforming, ensuring the door remains functional during a fire. Automatic Closers: Often equipped with automatic closing mechanisms to ensure the door is always closed, providing a barrier to fire and smoke. Glazing: Some fire doors include fire-resistant glazing, which allows for visibility while still providing fire protection. The glazing is made from special fire-rated glass. Core Material: The core of a wood fire door is typically made from solid wood or a composite material designed to enhance fire resistance. Benefits of Wood Fire Doors Safety: The primary benefit of wood fire doors is the increased safety they provide by slowing the spread of fire and smoke, giving occupants more time to evacuate. Compliance: Installing fire-rated doors helps buildings comply with local fire safety regulations and building codes, which are essential for legal occupancy and insurance purposes. Aesthetic Flexibility: Wood fire doors offer a range of design options, allowing them to blend seamlessly with the interior décor of residential or commercial spaces. Durability: These doors are designed to be robust and durable, capable of withstanding regular use while providing long-term fire protection. Noise Reduction: The solid construction of wood fire doors can also contribute to soundproofing, reducing noise transmission between rooms.