Fire Entry Suit Dealers

INGRESS™ Fire Entry Suit Manufacturers, Suppliers & Exporters INGRESS™ Fire Entry Suits are manufactured in compliance to meet stringent ISO 9001 standards. Fire Entry Suit is a highly insulated suit designed for entry into extreme fires where contact temperatures can reach up to 2000°F (1093°F). It is fabricated out of special high temperature fabrics for maximum protection in total flame entry. Aluminised Fire Entry Suit is designed for maximum personal fire protection. They can be worn in preparation for possible fire eruption or for stand-by operations should a rescue or evasive action require passage through a fire zone. The suit is highly engineered to support the most extreme conditions with multiple layers of insulation and fully insulated hood, mitts, boots, and soles.It protects against high radiant heat as high as up to 3000°F (1650°C).

• Material: Aluminium
• Feature: Highly Insulated Boot Sole Provides Protection From Hot Floor
• Standard: UL 214/NFPA 701, MIL-C-20079, MIL-I-24244, NRC 1.36, And European BS EN407
• MODEL NO: NSS-BP-811
• Product Category: Body Protection
• Radiant heat: 3000oF (1650oC) for 3000 Series
• Short duration ambient heat: 1500oF (815oC)
• Total flame: 2000oF (1093oC)

• Type: Fire Entry Suit
• Material: Aluminium

The Fire Entry Suit should have High level Protection and High Comfort using proper membrane Fabrics and Respirators for the fire extinguishing purpose.We are quality Aluminized Fire Proximity Suits Manufacturer services. The suit shall be suitable for human height from 165 cms to 175 cms. The fire entry suit should be made of 9 Layers of specialized Aluminized para-aramide fabrics and other insulation Fabrics. The suit also be composed of uninflammable polyrentene membrane. The inner isolated part of the suit should be stitched with Nomex and Aramid felt fabric. The combination of polyurethane fabric along with Aramid felt shields in filtrations of liquids into the suits and enables to check away the steam out of the suit. The polyurethane membrane should not allow the outside heat to enter the body premises. The suit shall be a two piece item covering complete human body consisting of hood integrated with the Coat as one piece and a Trouser having harness belt with shoulder straps. The suit shall be capable of being used over normal clothes. The entire Suit should be made of the Fabric assembly as mentioned above. The full detailed Features of the Garment should be as below : Coat with Hood should be sewed fastly together. The Hood should have visor with golden reflexive and unsweaty modification, double protective glass, double fastening, metal zip and Velcro being located into the are of hood, which enables a very comfortable wearing andputting up and down. The Coat should have a provision of wearing a Breathing Apparatus. Trousers should be having regular braces, the belt for making the waist slimmer in the lower parts of trouser, a metal zip for more comfortable putting up the shoes on the feet. Leggings - Steel in lay on the in step, the lower steel support for fasting the shoes and protecting against getting up the leggings. Gloves - 5 fingers with membrane against liquid at the wrist with knitting, to use over where over the gloves for protection against heat. Shoes, Overcoat - The shoe should have back side double fasting, metal zip and Velcro fasting belt for shoe inside the aluminised overcoat. The entire Fire Entry Suit should be provided with Gloves, Leggings, Shoe Overcoat and Breathing Apparatus pouch The suit shall be having enough space to accommodate inside a self-contained breathingapparatus in complete protected manner. The weight of total suit shall not be more than 8 kgs.   The entire Suit should be Certified as per EN 1486 standards and should achieve Level III with the weight not exceeding more than 8 Kgs. Shelf life (shall not be less than 5 years under specified storage conditions) TEMPERATURE PARAMETERS : The following temperature parameters should be met by the Suit certified by the manufacturer: (a) The highest direct flame temperature protection offered by the suit: ( i) 1500 deg. C for a continuous period of 10 seconds. ( ii) 1400 deg C for a continuous period of 30 seconds. (iii) 1200 deg C for a continuous period of 3 minutes. (b) The highest direct radiant temperature protection offered by the suit : ( i) 1500 deg C for a continuous period of 10 seconds. ( ii) 1420 deg C for a continuous period of 30 seconds. (iii) 1220 deg C for a continuous period of 3 minutes. (iv) 1200 deg C for a continuous period of > 7 minutes at a distance of 1.5 meters from the flame wall.

We offer fire suit or fire immediacy suit, which is generally silver in color or a silver bunker suit. It is generally designed for saving a fire combatant from high temperatures that is particular close to fires of extremely high temperatures such as the aircraft fires.

Fire Entry Suit is designed for the maximum fire protection. Fire Entry Suit consists of insulated hood, mitts, boots, and soles that are capable enough to withstand extreme temperature. Moreover, Fire Entry Suit is engineered in such way so that it can ensure comfort of the wearer. Highlights Able to withstand extreme temperatureConform to the defined parameters of fire safetyComfortableWaterproof

Fire entry suit, Aluminised Fire Entry Suit is designed for maximum personal fire protection. They can be worn in preparation for possible fire eruption or for stand-by operations should a rescue or evasive action require passage through a fire zone. The suit is highly engineered to support the most extreme conditions with multiple layers of insulation and fully insulated hood, mitts, boots, and soles.

Our offered range of body protection products are made by using top quality fabric to provide utmost safety and comfort to the wearer. These products are environment specific and are ideal for the industrial workers. Apart from the range of dangri, aprons and uniforms, these products can also be made with various prints and logos as per the clients approach.

Our manufactured fire entry suits are designed in such a way so as to provide maximum personal fire protection. They are useful in fire fighting as well as while passing through a passage affected by fire . These fire entry suits have been provided with minimum 8 layers of insulation.

The 7000 series aluminized fire entry suit consists of separate Coat (with B.A.Set Pouch), Pant, Hood, Boots and Gloves constructed from multiple layers of insulated multi layered Aluminized Silica Fabric (outer shell) for Maximum Heat Radiant Protection. This unique, breakthrough insulation Technology, delivers superior heat and Radiant and flame protection. 7000 series Fire Entry Suits features new patents and ergonomic designs permitting users greater freedom of moments. These items of heat protective garments are manufactured from, Aluminized Silica Fabric, Thermal Insulation Fabric, Moisture Barrier Lining & Fire Retardant Fabric Lining and Woolen Lining, All these garments are stitched using the superior quality 4 Ply Kevlar thread of DUPONT make, USA. Shoes are with oil and heat resistant sole. Application: Ideal for its use where the high heat and radiant heat protection is required. Designs for short duration ambient heat 1500 deg. F (815 C), Radiant heat to 3000 deg. F (1650 C) and total flame 2000 deg. F (1093 C).

We make available aluminized, heat resistant and fire proof Fire Entry Suit. Fire Entry Suit, that we offer, is made from Zetex Plus aluminized fabrics. The Fire Entry Suit consists of fully insulated hood, gloves and boots. The Fire Entry Suit is designed for maximum personal fire protection and radiant heat protection.

With the assistance of skilled associates and brilliant packaging system, we are able to provide damage-free products to the clients as we wrap them using high quality material. We are known for providing a qualitative array of products and thus our entire range is strictly checked against varied quality parameters.   Applications : Fire Entry Suit are used in various industries like Petroleum, Oil & Gas, Electricity Generation, Steel, Defence, Petrochemicals & Refining and all places where there is hazard of fire eruption and extreme heat generation. Certifications : Made Out Of Fabric Which Are Tested & Passed EN ISO 11612.   Specification : Suit made of multiple layers for maximum heat protection. Breathing apparatus required.   Suit consist of : HOOD: Designed to be used with air mask. Inner drape flame seals. Underarm adjustment straps. Built in shell for structural support. Hard cap with ratchet headgear. Speedy clip for hard cap support. Hardened aluminum window frame with 2 tempered glass lenses plus 2 gold plated Lenses for thermal protection. COAT: Designed to be worn with breathing apparatus. Double storm fly Front : Flame seal with drawstring at coat bottom. PANT: High waist design. 2 inch wide adjustable suspenders. Adjustable Straps on leg bottoms. BOOTS: Designed to fit over work shoes. Rear entry with overlap snap closure and adjustable take-up straps. Insulated wire reinforced sole of flame resistant neoprene fiberglass riveted to boot cover. MITTS: Heavy weight construction made with Aluminised fabric. WEIGHT: weight of complete suit will be approximately 25 kgs. CERTIFICATIONS : Made Out Of Fabric Which Are Tested & Passed EN ISO 11612.

Series NA2K & Series A3K developed and manufactured by Modern Apparels are engineered to the highest levels of protection to the Firefighters & Rescuers against extreme temperatures. These Fire Entry suits can be used in preparation for possible fire eruption or for stand-by operations should a rescue or evasive action require passage through a fire zone. The Series 2K can withstand temperatures to 1093oC (2000oF) against heat and fire while Series A3K, having Aluminized outer shell can withstand high radiant heat to 1650oC (3000oF).  Applications : Fire Entry Suit are used in various industries like Petroleum, Oil & Gas, Electricity Generation, Steel, Defence, Petrochemicals & Refining and all places where there is hazard of fire eruption and extreme heat generation.  Specification:-Suit made of multiple layers for maximum heat protection. Breathing apparatus required. Suit consist of :- HOOD: Designed to be used with air mask. Inner drape flame seals. Underarm adjustment straps. Built in shell for structural support. Hard cap with ratchet headgear. Speedy clip for hard cap support. Hardened aluminum window frame with 2 tempered glass lenses plus 2 gold plated Lenses for thermal protection. COAT: Designed to be worn with breathing apparatus. Double storm fly Front : Flame seal with drawstring at coat bottom. PANT: High waist design. 2 inch wide adjustable suspenders. Adjustable Straps on leg bottoms. BOOTS: Designed to fit over work shoes. Rear entry with overlap snap closure and adjustable take-up straps. Insulated wire reinforced sole of flame resistant neoprene fiberglass riveted to boot cover. MITTS: Heavy weight construction made with Aluminised fabric.WEIGHT: weight of complete suit will be approximately 25 kgs. CERTIFICATIONS : Made Out Of Fabric Which Are Tested & Passed EN ISO 11612.

Fire entry suit is specially designed for complete protection from fire. Fire entry suits are generally made up 8 layers of insulation In this case boots, soles and hoods are also completely insulated. We manufacture fire entry suits strictly adhering the standards of ISO 9001. Here fire fighter while performing his duty may come in contact with fires where temperature can be more than 2000 ° F. sometimes. Our fire fighting suits are manufactured taking into consideration all these aspects and we can confidently say that they are able to protect fully the user from heat up to 3000 ° F

Product Specification We offer red fort work wear fire entry suit that have High level protection and high comfort using proper membrane fabrics and respirators for the fire extinguishing purpose. The suit shall be suitable for human height from 165 cms to 17 cms. The fire entry suit should be made of 9 Layers of specialized aluminized para-aramide fabrics and other insulation fabrics. The suit also be composed of uninflammable polyrentene membrane. The inner isolated part of the suit should be stitched with Nomex and Aramid felt fabric. The combination of polyurethane fabric along with Aramid felt shields in filtrations of liquids into the suits and enables to check away the steam out of the suit. The polyurethane membrane should not allow the outside heat to enter the body premises. The suit shall be a two piece item covering complete human body consisting of hood integrated with the Coat as one piece and a trouser having harness belt with shoulder straps. The suit shall be capable of being used over normal clothes. The entire suit should be made of the fabric assembly as mentioned above. The full detailed features of the garment should be as below : Coat with Hood should be sewed fastly together. The hood should have visor with golden reflexive and unsweaty modification, double protective glass, double fastening, metal zip and Velcro being located into the are of hood, which enables a very comfortable wearing and putting up and down. The coat should have a provision of wearing a breathing apparatus. Trousers should be having regular braces, the belt for making the waist slimmer in the lower parts of trouser, a metal zip for more comfortable putting up the shoes on the feet. Leggings - Steel in lay on the in step, the lower steel support for fasting the shoes and protecting against getting up the leggings. Gloves - 5 fingers with membrane against liquid at the wrist with knitting, to use over where over the gloves for protection against heat. Shoes, Overcoat - The shoe should have back side double fasting, metal zip and Velcro fasting belt for shoe inside the aluminised overcoat. The entire fire entry suit should be provided with gloves, leggings, shoe overcoat and breathing apparatus pouch. The suit shall be having enough space to accommodate inside a self-contained breathing apparatus in complete protected manner. The weight of total suit shall not be more than 8 kgs. The entire suit should be certified as per EN 1486 standards and should achieve level III with the weight not exceeding more than 8 Kgs. Shelf life (shall not be less than 5 years under specified storage conditions). Operations, maintenance, storage and cleaning guidelines along with the catalogues / booklets / video. Precautions to use the suit and the conditions under which the suit is not be used. Vendor to provide label on his suit as per EN 1486 – Level III. The vendor shall submit the copy of the certificate from the approved certifying agency clearly stating that the suit is meeting all EN 1486 and the vendor is authorized to use the lable / mark from the certifying agency (e.g. UL) or any other reputed International organization in this regard. Additionally, vendor must also certify the compliance w.r.t. additional specifications given here.

• Brand Name: Ingress
• Color: Silver
• Gender: Unisex
• Weight: 12 Kg
• Features: Soft texture , Allowing air circulation , Fire retardant.
• Sleeve Type: Full Sleeves
• Heat Upto: 3000 Deg F (1650 Deg C)

Punjab Fire Protection Services is one of the dependable Suppliers of Fire Entry Suit. We offer red fort work wear Fire Entry Suit that provide high level protection and high comfort. The Fire Entry Suit, we offer, is made using proper membrane fabrics and respirators for the fire extinguishing purpose. The product is duly tested on various quality control parameters.

• Size: Universal
• Color: Silvery White
• Application: It is for rescue or evasive action through a fire zone.
• Code: NFPA
• Brand Name: Ingress
• Weight: 12 kg Approx.