Flanged Immersion Heaters Dealers

We are best manufactures for Immersion Heaters. Immersion Heater are made in Tubular and cartridge types. They can be manufactured with threaded bushings of flanges. Different sheath materials like stainless steel, Incoloy , Copper, Titanium are used depending on application requirements. Immersion heaters can be supplied with a vareity of diferent terminal enclosures like general purpose enclosure, Weather proof enclosure & Flameproof enclosure. Our company also offers a wide range of flanged immersion heaters, which provide appropriate heater size-to-application and fittings. These heaters solves purpose of various industrial needs. The flanged immersion heaters are perfectly designed to provide proper element spacing to maximize heater performance and the life.

• Voltage: 220-240V
• Heater Material: SS
• Usage/Application: Industrial
• Frequency: 50-60 Hz
• Number Elements: 6
• Element Diameter: 0.475 inch
• Length: 16 inch
• Wattage: 100W

We offer the broadest selection of stocked Flanged Immersion Heaters in the industry. Technical Specification: Available in 1000W240V singledual element Length of the Heater can be from 12" to 34" Length of the Heater can be from 11", 24", 27", 36" Available in 1000W, 3000W, 5000W, 240V single dual element

Flanged heaters are commonly used in many chemical, petroleum and water based applications. Consisting normally of an ANSI rated flange with several hairpin elements or bugle tubular elements extending from the face of the flange, this electric heater uses direct heat application to the liquid medium. A thermowell is often used within the bundle of elements to allow for a probe (either a thermocouple, RTD or basic mechanical thermostat) to relay temperature readings to a digital control panel that cycles and maintains the desired target temperature. Often a high limit sensor is also used to help protect liquid mediums from over heating and, offers protection to the flange heater as well

• Type: Flanged Immersion Heaters
• Material: Mild Steel, Stainless Steel
• Certification: CE Certified
• Application: Immersion Boiling
• Grade: AISI
• Voltage: 110V, 220V, 380V, 440V.580V
• Condition: New
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw, 50-100KW
• Power Source: Electric
• Brand Name: PEDKAI
• Warranty: 1 YEAR
• After-Sales Service Provided: YES

• Usage: Used in the Process Industry for Heating Liquids , Heating Gases and as Tank Heaters
• Material: Metal
• Power Source: Electric
• Finish: Coated
• Feature: Easy to Use

These type of immersion heaters are mostly used in the process industry for heating liquids , heating gases and as tank heaters. Immersion heaters are tubular welded or brazed into a flange. The enclosure can be selected depending upon the applications and can be customized with ANSI standards flanges.

• Power: 1000 W
• Tolerance: 0.5%
• Country of Origin: Made in India
• Heater Material: Stainless Steel
• Max. Operating Temp.: 265 Degree Celsius
• Diameter: 25 mm

Flanged Immersion Heaters are designed for use in tanks and pressurized vessels to heat both liquids and gases. They mate to a companion flange that is either welded to a tank wall or, for circulating type heaters, to a pipe.

SG Tubular Heaters are the most versatile and widely used source of electric heat for industrial, commercial and scientific applications. Available with straight and formed, flanged, immersion heaters, Tubular finned heaters and hot water tank heaters.

• Power(Watts): Up to 120 W
• Sheath Material: Copper, Steel, 304 Stainless steel, INCOLOY, Titanium
• Flange Material: MS, Stainless Steel
• Features: Moisture resistant, Corrosion resistant, Explosion resistant.

• Type: Flanged Immersion Heaters
• Material: Alloy Steel, Cast Iron, Copper, Mild Steel, Stainless Steel
• Certification: CE Certified, ISO 9001:2008
• Application: Immersion Boiling
• Color: Grey, Silver
• Voltage: 110V, 220V, 380V
• Condition: New, Used
• Power Source: Electric

• Voltage: Up to 600 V
• Diameter: 0.260”, 0.315”, 0.375”, 0.430” or 0.475”, 0.625”

Flanged industrial immersion heaters are amongst the most popular heaters owing to wide customization, easier installation and operations in stringent environment. Made by brazing or welding flange with several hairpin elements or bulge tubular elements, these are designed for heating chemical, petroleum and water based applications specially heat transfer fluids, medium and lightweight oils and water in tanks and pressure vessels. A thermocouple or RTD is often used within the bundle of elements to maintain the desired target temperature. Extra wiring boxes to make electrical connections are provided with it. Tubing known as a thermowell is used to protect thermocouples and heating elements. Temperature readings are then transmitted to a control unit that regulates power. Although, they occupy a small space, but have a large heating element which is perfect for applications which require high wattage heating. This is one of the most efficient forms of process heating with nearly 100 percent efficiency.

Flanged industrial immersion heaters are used for raising the temperature of fluids inside the tanks and vessels. They mate to a companion flange that is welded to a tank wall. Comprising of ANSI rated flange with tubular elements extending from the face of the flange or cartridge type heaters fitted in tubes. In addition to adherence to very stringent industrial requirements, safety and reliability with optimized performance is the hallmark of our heaters.Features Efficient Heat Transfer Ease of installation Low maintenance Wattage as per the process requirement Thermostatic control/RTD provided for precise temperature control. Low Watt Density heaters used for longer life. MOC: MS/SS Heaters: Removable cartridge type heaters or tubular heater bundles. Available in voltages 415/230/110V Totally sealed weather-proof terminal box. Mating flange (Optional) Control panel (optional)

• Length: - 8" to 72'
• Tube Dia –: 3 8" to 5/8"
• Volts –: 250 - 440V
• Watts –: 500 to 60.0 KW

APPLICATION Flanged immersion heaters are one of the most widely used methods for heat-ing gases and liquids (such as water, oil, heat transfer fluid and corrosive solutions). Designed for use in tanks and pressurized vessels, they are easy to install and maintain to provide heat for many processes. The direct immersion method is energy efficient and easily monitored and controlled. Hot Water Storage Tanks Warming Equipment Preheating All Grades of Oil Food Processing Equipment Cleaning and Rinsing Tanks Heat Transfer Systems Process Air Equipment Boiler Equipment Freeze Protection of Any Fluid    

• Type: Flanged Immersion Heaters
• Material: Alloy Steel, Cast Iron, Copper, Mild Steel, Stainless Steel
• Certification: CE Certified, ISO 9001:2008
• Application: Immersion Boiling
• Color: Grey, Silver
• Voltage: 110V, 220V, 380V
• Condition: New, Used
• Power Source: Electric

IHCO FLANGED IMMERSION HEATERS are designed to be attached to flat surfaces of tanks or mating flanges in order to heat liquids. The number of hairpin-shaped elements varies according to wattage and size of flange.   Construction and Features   FLANGE Material and rating- 150 pound Carbon steel (sizes available: 3″, 4″, 5″, 6″)   Elements   SHEATH MATERIAL Sizes available: .440, .315 HOUSING Incoloy for immersion in materials corrosive to copper and stainless steel and high heat environments (to1600o F) Stainless Steel for environments corrosive to copper (1200oF) Copper for water heating and Liquids not corrosive to copper (to 350o F) NEMA 1- without thermostat options TEMPERATURE CONTROL Thermostat option (see previous page) Thermocouple may be spot welded to element sheath CIRCUITS Single-phase: one or two elements Three-phase: three, six or nine elements Number of elements possible by Flange size: 3″- 1, 2 or 3 4″- 2, 3, 4 or 6 5″- 2, 3, 4, 6, 8 or 9 6″- 2, 3, 4, 6, 8 or 9

• Length: 8" to 72'
• Tube Dia: 3 8" to 5/8"
• Volts Q: 250 - 440V
• Watts: 500 to 60.0 KW

Flanged immersion heaters are one of the most widely used methods for heat-ing gases and liquids (such as water, oil, heat transfer fluid and corrosive solutions). Designed for use in tanks and pressurized vessels, they are easy to install and maintain to provide heat for many processes. The direct immersion method is energy efficient and easily monitored and controlled. Hot Water Storage Tanks Warming Equipment Preheating All Grades of Oil Food Processing Equipment Cleaning and Rinsing Tanks Heat Transfer Systems Process Air Equipment Boiler Equipment Freeze Protection of Any Fluid Flanged Immersion Heaters consist of bent tubular elements welded or brazed into a flange and provided with wiring boxes for electrical connections. Flange heaters are installed by bolting to a matching flange welded to the tank wall or nozzle. A wide selection of flange sizes, kilowatt ratings, voltages, terminal enclosures and sheath materials make these heaters ideal for all types of heating applications.

Flanged heaters are commonly used in many chemical, petroleum and water based applications. Consisting normally of an ANSI rated flange with several hairpin elements or bugle tubular elements extending from the face of the flange, this electric heater uses direct heat application to the liquid medium. Flanged heaters allow the flexibility of using many different alloys to help resist corrosion and maintain life longevity of the flanged heating element. Steel flanges are typically used for lubricant oils, heavy and light oils, waxes as well as mildly corrosive liquids and low flow gas heating.

• Power: 500-1000 W
• Country of Origin: Made in India
• Voltage: Upto 600 V
• Tolerance: +- 10 %
• Frequency: 50 Hz
• Temperature: 500degF
• Heater Material: Ceramic
• Brand: Magma

The company is an established Manufacturer and Supplier of Flanged Immersion Heaters. The Flanged Immersion Heaters we make available are manufactured in adherence with set industrial norms. We maintain a large stock of the Immersion Heaters in our spacious warehouse, to meet the bulk and urgent requirements of the buyers. Details :Flanged industrial immersion heaters are used for raising the temperature of fluids inside the tanks and vessels. They mate to a companion flange that is welded to a tank wall. Comprising of ANSI rated flange with tubular elements extending from the face of the flange or cartridge type heaters fitted in tubes. In addition to adherence to very stringent industrial requirements, safety and reliability with optimized performance is the hallmark of our heaters.   Features : Efficient Heat Transfer Ease of installation Low maintenance Wattage as per the process requirement Thermostatic control/RTD provided for precise temperature control. Low Watt Density heaters used for longer life. MOC : MS/SS Heaters : Removable cartridge type heaters or tubular heater bundles. Available in voltages 415/230/110V Totally sealed weather-proof terminal box. Mating flange (Optional) Control panel (optional)

• Tubing: Copper, Incoloy, or various grades of SS.
• Thermostat or thermocouple: Can also be provided
• Terminal box (enclosures): can also be provided in standard sizes or can be customized as per the requirements.
• Wattage Range: 1KW - 30KW
• Flange/Plate Material: MS, SS, Brass etc of varied thicknesses, shapes and sizes.

These are type of low to medium capacity heating elements used to heat both gases and liquids in tanks or pressure vessels. In a flanged heating element single or multiple heating elements are brazed or welded on standard ANSI rated plates or custom made plates.  

• Voltage: 220-240, 415
• Material: Stainless Steel 304
• SKU: AE- 296-301
• Wattage: 1000, 3000, 6000 Customizable
• Master Packing: 25 Pieces
• Flange Type: Tringle, Square, Round
• Pipe Type: Double Pipe, Triple Pipe, Customizable

Flanged Immersion Heaters, both round flange and square flange models are a great choice for applications requiring larger wattages. Flanged immersion heaters are designed for installation into a pipe body, tank, or pressure vessel using standard pipe size. These heaters are available in a wide selection of rates, sizes, and sheath materials suitable for the heating requirements of water, air, and other gases. Flanged immersion heaters are very efficient since all energy that is generated is dissipated directly into the medium which is being heated. All flanged heater models incorporate tubular heater construction welded or brazed into a carbon steel pipe flange.

We are the manufacturer, supplier and exporter of Industrial Heaters such as indutrial heater, poratble industrial heater, industrial immersion heaters and oil immersion heaters. Our range of industrial heaters is the best in the market. We put lots of effort while manufacturing indutrial heater, poratble industrial heater, industrial immersion heaters and oil immersion heaters.

FLANGED IMMERSION HEATERS are designed to suit variety of liquid and non- flame proof gas heating applications. The standard heater consists of a number of tubular elements formed to shape and fitted into a carbon steel or stainless steel flange. Depending upon the number of elements and the customer’s requirements the heater can be wired in stages. suitable for use on a 3 phase supply A robust terminal cover is supplied to protect the electrical connections. The number of elements fitted depends upon the media to be heated and the kilowatt rating required. copper sheathed elements are used for heating water, and stainless steel elements are used for heating oil, For other applications a variety of sheath materials are available. The standard range available is from 3 Kw - 180 Kw. The heaters are designed for either single phase or 3 phase supply. Whilst our standard range of flanges is based on “D” TABLE. We shall also be pleased to quote for heaters to suit special applications. When making enquiries please give following information : Heaters for flame proof application is our speciality 1) Liquid or gas to be heated 2) Kilowatt rating required 3) Voltage - single or 3 phase 4) Inlet & outlet temperatures 5) Heat up time required 6) working pressure 7) Heater location details 8) Temperature controls required.

• Type: Flanged Immersion Heaters
• Material: Alloy Steel, Cast Iron, Copper, Mild Steel, Stainless Steel
• Certification: CE Certified, ISO 9001:2008
• Application: Immersion Boiling
• Color: Grey, Silver
• Voltage: 110V, 220V, 380V, 440V.580V
• Condition: New, Used
• Power Source: Electric

The products are manufactured with utmost precision using high quality material of construction according to the international quality standards and customized according to the need of the client. We cater to industrial, domestic and commercial heating solutions. Our service delivery principles - quality products at affordable prices together with excellent customer service - have ensured that we have remained at the head of our sector.