Flash Point Tester Dealers

• Voltage: 220-380V
• Material: MS
• Brand: HAMCO
• Frequency: 50-60 Hz
• Temp.Rang: Ambient to 400oC
• Ignition Source: Gas Flame with two Pilot electric Coil.
• Temperature Sensor: PT-100 in stainless steel sheath.
• Flash/Fire Detector: Ionization principle based flash-detector sensor
• Equipment Overall Size: 230mm (W) X 470mm ( D ) X 385mm ( H )
• Power Source: Electric

• Driven Type: Electric
• Power: 750W
• Application: Laboratory
• Certification: ISO 9001:2008 Certified
• Voltage: 220V
• Type: Flash Point Tester
• Weight: 0-10kg
• Automation: Semi Automatic
• Warranty: 1yrs
• Country of Origin: India

This apparatus is made as per IP 34, ASTMD-93 and IS 1448 (Part I) 1270 (P.21) and IS 1209-1953 method B. Used for finding out Flash Point above 70°C and below 300°C. The having Oil Test Jet Gas Test Jet flammable device, stirrer with flexible shaft. The Assembly rests in Air Bath which is covered with Dome shape metal top. The cup is fitted with insulated Handle and locking arrangement near Cup flange. The assemble is kept on round shape electric heater with Separate temp. regulator. Suitable for operation on 220 Volts 50 cycles AC Circuits.

• sizes: B-1, B-2, B-3, B-4, B-5

The paint film is bent through 180° over a 6.35 mm dia rod and examined for any damage, detachment or cracking of the film. The tester consists of two plates hinged at one end with the help of a 6.35 mm dia rod. A stop is provided on one plate against which the painted panel can be held. Complete with x10 magnifier

• Type: Automatic
• Features: Controlling the speed of rising temperature automatically, with coercive cooling system. With the safe protectiong for firing, alarm and stop testing when exceeding the safe temperature
• Screen: LCD screen (320 240)

• Color: BLUE AND GRAY

Semi automatic ABEL. In that automatic flash detection with buzzer system and whenever flash comes reading lock system. Also automatic cooling when flash comes and heating and stirring will stop automatically.

Open cup. Heating air bath with temperature controller and gas regulator. Test assembly with oil cup, gas ignition device lifting handle for oil cup. Power supply : 230 V, 1 Phase, 50 Hz.

• Shipping Weight: 44 lbs (20kg)

For flash point determination of petroleum products and other liquids having flash points between -30°C and 110°C. . Conforms to IP 170 and related specifications, . Simple automation routine for easy operation

Description Advanced technology, simple operation, high scientific and technological content, it is the ideal imported product, which is ranking the country's leading level. Main technical characteristics 1. It adopts colored LCD, man-machine conversation interface, and blank buttons. It has prompts menu and guide to choose method A or B, preset temperature, sample serial number, barometric pressure, test data and other parameters. 2. It can simulate and show temperature-time curve. It has prompts for wrong operation and prompts to modify test data, test time, and other parameters. 3. It can save test data of 100 groups. It is equipped with RS-323, and 485 computer ports, so it can save more test data when it is connected to a computer. Then you can also modify some parameters. 4. It can calibrate the effect of barometric pressure to the test and calculate the modified value. 5. Differential detection. It can modify system deviation automatically. 6. It can open lid, apply flame, make detection, and print test data automatically. The test arm can be raised up and lowered down automatically. 7. It uses an electron igniter for flame ignition. It has forcible wind cooling function.

• Brand Name: BIOBASE
• Place of Origin: CHINA

It is used to make determination of the closed cup flash point of the petroleum products. Features of bk-261 * the heating power is continuously adjustable. The power is shown visually by voltmeter.the temperature control mode is advanced and reasonable. * the structure is designed small and exquisite.the stainless-steel table board is beautiful and easy to clean. * operation is easy.test results are precise.it has been chosen as the instrument to test the closed cup flash point by many metering and detecting institutes. Features of bk-261a * simulation tracking displays function curves of heating up and test time. *. Equipped with prompt function of test date,test time and other parameters. * automatically calibrate the effect of atmospheric pressure to test the corrected value. * differential coefficient detection.automatically correct the system deviation. * automatically open the lid,detect the flash point and print test data. * the test arm rises up and lowers down automatically. * igniting with electric igniting gun,forced air cooling.

• Measuring Parameters: • Temperature: °C/°F  • Measuring Range: 0°C to +420°C • Resolution: 0.01°C • Accuracy: ±0.1°C • Repeatability/Reproducibility: as per standard methods or better
• Temperature Measurement: • Sample Temperature: stainless steel, corrosion and shock-resistant PT100 sensor
• Detection System: • Ionization and thermal detectors combined into one multi-detection system
• Safety Devices: • Automated diagnostics of PT100 probe and thermal sensors • Automatic fire detection and fire extinguisher systems • Gas valve closes gas supply (30 mbar max.) at the end of the test
• Operating Range: • Ambient to 35°C • Max. R.H. 80%
• Operation: • Stirrer: designed with an electric motor • Double ignition system: gas and electrical ignitor • Heater: electrical heating as per ASTM procedures
• Dimensions (WxDxH) and Weight: • 37 x 52 x 32 cm, 30 kg
• Electrical Supply: • 220V ± 15% / 50 to 60 Hz • 115V ± 15% / 60 Hz

The FPM provides accurate and secure flash point testing for users seeking to characterize the volatility and flammability of biodiesel fuels, lubricating oils and petroleum products.     Key Features: Integrated Touchscreen Panel PC: 8.4-inch, TFT/LCD, high-resolution display Storage Capacity: save and store data files in an Excel-compatible format User-Friendly Software Interface: automated, temperature-controlled testing Advanced Safety Features: automated diagnostics, fire detection system and overheating protection

Model : RFP-301 Application Standard : ASTM D93 (Method A & B)ISO 2719 (Method A & B) Features : -Large-Sized Color Graphic panel- Simple Operation- Automatic Revision Function for Atmospheric Pressure- Safety features- Alarming or warning Specifications : 1. Measuring Range : +40 to +300°C2. Thermo Sensor : PRT – pt1003. Flash point Detection : Temperature Differentiation by thermocouple4. System Control : Digital control by 16 bit CPU5. Display & Input : TFT color graphic display, 5.7”, 256 color,320 x2406. Temp. Rising rate : 5 to 6°c/min & rapid heating7. Heating Bath : Metal Block8. Heater : Panel Type, 350°C9. Cooling of Sample : air cooling by fan10. Gas Supply : city gas or LPG

• Designed as per National & International Standards such as ISO2592, ASTMD92, IP36 • Used to test flash and fire point (except fuel oil and petroleum products open flash point bellow 79) • Auto programmable, temperature controller with data storage & printout facility • Measuring range: 0∼400 • Electric source: 220V 50Hz AC

• Weight: 14 Kg
• Brand Name: Anton Paar
• Application range ( DegreeC/ DegreeF selectable): Up to 405 DegreeC (761 DegreeF)
• Sample temperature: Pt100
• Ignition type: Gas and electric (open hot wire)
• Test programs: ASTM D93 | EN ISO 2719 | JIS K2265-3 | IP 34 | GOST-R | EN ISO 2719 | 15 user-defined test programs

• Type: Flash Point Tester
• Weight: 0-10kg, 10-20kg, 20-30kg, 30-40kg, 40-50kg
• Color: Brown, Creamy, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Application: Industrial
• Power: 100W, 10W, 1Kv, 200W, 20W, 500W, 50W, 5W, 750W
• Automation: Automatic, Fully Automatic, Manual, Semi Automatic
• Driven Type: Electric
• Warranty: 1yrs, 2yrs

Cleveland Flash Point Apparatus – Open Cup       Electrically heated model

As the name clarifies, the flash point tester is ideal for finding out the flash as well as the fire point of different liquids. Made as per the standards of is/ip/bs/astm, etc., the flash point tester is appreciated for its optimum quality and sturdy construction. composition : open cup clevland :temp. Up to 400cclosed cup abbel :below ambient to 49cclosed cup pensky martentemp. 50c to 400c models available : manualautomaticsemi-automatic

This flash point and fire-point test method is a dynamic method and depends on definite rates of temperature increases to control the precision of the method. Its primary use is for viscous materials having a flash point between 79 deg C (175 deg F) and 400 deg C (752 deg F) except fuel oils, to define the hazards of flammable and combustible materials used in shipping and safety regulations. The temperature of the approximately 70 ml test specimen is increased rapidly at first and then at a slower constant rate as the flash point is approached. At specified intervals a test flame is passed across the cup, to measure the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions.